Napoleon® NZ-26 Prestige EPA Zero Clearance Wood Burning Fireplace
Shown with Satin Chrome webbed arched door and louvres
Free shipping to all lower 48 US states
Unit includes: Firebrick lined firebox, ceramic PHAZER™ baffle, ash pan with lid, variable speed switch, thermodisc for optional blower kit.
Features:
- Air control chamber that eliminates negative pressure problems
- Uses outside or inside air for combustion
- Full brick patterned refractory liner retains heat and supports overnight burn
- Exclusive PHAZER™ light weight ceramic baffle heats up quickly to help increase efficiency
- Four stainless steel secondary air tubes that create fascinating display of YELLOW DANCING FLAMES®
- Convenient and elegant, stainless steel log retainer and primary "bottom air feed" assists in cold start up and to "recharge" a small dying fire
- Air wash system insulated with ceramic fibre and protected with stainless steel cover plate eliminates deterioration and assures complete combustion, maintaining an extremely clean viewing glass
- Large "King Size" capacity ash pan (600 cu. in. capacity) with unique tri-fold lid and dual carrying handles
- Easy, single lever combustion control with optional motorized thermostat allows for automatic regulation of the burn rate
- Firebox aerodynamics allow you to open the door without drawing smoke into the room
- Heat radiating high temperature ceramic glass
- Variable speed switch and heat sensor for blower are factory per-installed ready to accept optional blower kit
- President's Limited Lifetime Warranty
NZ-26 Prestige EPA Zero Clearance Wood Burning Fireplace
Specifications: NZ26
| Heat Output* | 11,500 - 27,400 BTU |
| Heat Output (high burn)** | 70,000 BTU |
| Firebox Capacity (cu. ft.) | 1.7 |
| Area Heated (sq. ft.) | 2,000 |
| Burn Time | 9 hours |
| Max log size | 18" |
| Emissions (grams per hour) | 5.4 |
| Flue Diameter | 6" |
| Outside Combustion Air | yes |
| Mobile Home Approved | yes (USA only) |
| Central Heating and/or Blower | Optional |
| Door size | 27 7/8W x 19 1/2H |
| Weight without bricks | 262 LBS |
| Weight of bricks | 132 LBS |
Additional Information
*EPA rated BTU/h with softwood test fuel (for emissions only ) - no refueling
**Wolf Steel Ltd own test showing realistic BTU using hardwood logs with regular refueling. Heat output will differ depending on chimney draft as well as type, moisture content and size of wood.
BTU figures may vary with individual conditions
The optional central heating blower and thermostatic control may be installed into it's own forced air duct work system
Safety tested and listed to Standards in Canada and the United States: ULC S610-M87, ULC S627, UL 127 for zero clearance fireplaces and to S639-M87 for solid fuel burning masonry fireplaces
Please consult manual for details. |
Brochure
|
Manual
|
About Zone Heating
|
