sale

100% Made In The USA

304L Stainless Steel Rigid Chimney Liners and Components

Rigid stainless steel lining kit

Applications: Wood and wood pellet burning appliances

Click here to view typical components for rigid lining kits.

No more lock form seams, or spot welds that are leaky and dangerous enough to be illegal in Europe! One of the great features about our rigid chimney liners is the seam and how it keeps the pipe perfectly round. Lock and spot welded seams warp, ours will not. Our seams are laser welded, leaving virtually no seam to be seen.

No more struggling to force one pipe into the next. These ends slide together for a tight fit, the first time, every time.

Order multiple components and pipe lengths

304L Stainless Steel Rigid Liner

304L Stainless Steel Rigid Liner

Rock Rigid stainless steel 304L chimney liner has the industry's only laser welded seam; it will not warp like all others will over time. 24 gauge stainless steel. It has a smooth interior wall providing you with optimum draft and flow. Warrantied for life.

Note: When ordering, please be sure to allow an extra 1-3/4" for overlap wherever liner sections will be joined together.

For ordering multiple sections of liner, try our Liner Length Calculator.

304L Stainless Steel Rigid Liner

Qty:

Rigid Liner Insulation

Rigid Liner Insulation

Compress the insulation around the rigid liner by hand, until the two edges snap and lock together. Available in 24" lengths.

Rigid insulation increases the outside diameter of the liner by about 1 3/4 inches.

Rigid Liner Insulation

Qty:

Rigid Chimney Cap, Inside Mount

Rigid Chimney Cap, Inside Mount

Rockford is well known for the quality of its chimney flue caps and that is important because, after all of your hard work the cap is all you will see from ground level! This cap fits into the inside opening of a round chimney pipe or round rigid chimney liner. 22 gauge stainless steel rain cap.

Rigid Chimney Cap, Inside Mount

Qty:

Rigid Flat Top Plate

Rigid Flat Top Plate

Fits flush to chimney top. Use the flat top plate if you do not have terra cotta liner projecting above the chimney crown. Our stainless steel rigid liner top plates come with hole diameters ranging from 3" thru 16".

Rigid Flat Top Plate

Qty:

Rigid Liner Terra Cotta Top Plate

Rigid Liner Terra Cotta Top Plate

If you have clay tile in your chimney and it is exposed by 1/2" or more at the top of your chimney you will need the terra cotta top plate. Our stainless steel rigid liner top plates come with hole diameters ranging from 3" thru 16".

See our Terra Cotta Top Plate Sizing Chart.

Rigid Liner Terra Cotta Top Plate

Qty:

Rigid Liner Support Clamp

Rigid Liner Support Clamp

The 18 gauge stainless steel support clamp is installed around the liner, and sets on top of the top plate which supports the liner at the top of your chimney.

Rigid Liner Support Clamp

Qty:

Rigid Liner Storm Collar

Rigid Liner Storm Collar

Install the stainless steel storm collar around the rigid liner right above the support clamp to keep moisture from entering the flue liner or the chimney cavity. The stainless steel metal is guaranteed not to rust!

Storm Collar Size Chart
3"fits 2 7/8" to 3 1/4"
4"fits 3 7/8" to 4 3/8"
5"fits 4 7/8" to 5 1/4"
6"fits 5 1/2" to 6 1/4"
7"fits 6 1/2" to 7 1/4"
8"fits 7 1/2" to 8 1/4"
9"fits 8 1/2" to 9 1/4"
10"fits 9 1/2" to 10 1/4"
11"fits 10 1/2" to 11 1/4"
12"fits 11 1/4" to 12 1/4"
13"fits 12 1/2" to 13 1/4"
14"fits 13 1/2" to 14 1/4"
15"fits 14 1/4" to 15 1/4"
16"fits 15 1/4" to 16 1/4"

Rigid Liner Storm Collar

Qty:

Rigid Liner Tee, Snout, and Clean Out Cap

Rigid Liner Tee, Snout, and Clean Out Cap

Stainless Steel Rigid Liner Tee, with removable 10 in. horizontal snout (take off), and bottom clean out cap.

Rigid Liner Tee, Snout, and Clean Out Cap

Qty:

Rigid Liner Tee with 22 in. Snout and Clean Out Cap

Rigid Liner Tee with 22 in. Snout and Clean Out Cap

Stainless Steel Rigid Liner Tee, with 22 in. removable horizontal snout (take off), and clean out cap.

Rigid Liner Tee with 22 in. Snout and Clean Out Cap

Qty:

Adjustable and Fixed Elbows - Rigid

Adjustable and Fixed Elbows - Rigid

Our stainless steel elbows have laser welded seams for smooth adjusting. These elbows have a female end to accept rigid or black pipe and a male end to complete the connection. No adapter needed!

Adjustable and Fixed Elbows - Rigid

Qty:

Male to Male Liner Coupler

Male to Male Liner Coupler

Are you in a tight spot? For tight clearance relining situations, this male to male chimney liner connector is just the ticket!!! This part is not dripless, and will require screws or rivets. The smooth butt welded seam makes this part slide together like butter, crimped on both ends!

This coupler is male on both ends. If you are using flexible liner, the liner itself slides over the coupler. For rigid liner, two female ends are required to fit the coupler.

Male to Male Liner Coupler

Qty:

Rivets for Pop Rivet Gun

Rivets for Pop Rivet Gun

Stainless steel 1/8" diameter pop rivets with a grip range of 1/8" or 1/4". Either size will work with our rigid chimney liner. Pack of 100.

You may also need a Pop Rivet Gun Kit.

Rivets for Pop Rivet Gun


Qty:

What Parts Do I Need?

304L Rigid Liner Top Assembly

rigid liner top assembly

The diagram at left shows the parts typically needed at the top of the chimney. The rigid liner
rigid chimney pipeRigid Chimney Liner Pipe
(1) is inserted into the chimney. The chimney top is covered by the top plateflat top plate
Rigid Liner Flat Top Plate

— or —
terra cotta top plate
Rigid Liner Terra Cotta
Top Plate
(2) which goes on over the liner. A support clampsupport clamp
Rigid Liner Support Clamp
(3) holds the liner in place and keeps it from slipping down the chimney. The storm collar
storm collar
Rigid Liner Storm Collar
(4) covers the gap between the liner and top plate to keep out moisture. The rain caprain cap
Rigid Liner Rain Cap
(5) gives an attractive finished look while keeping rain, birds and critters from getting into your chimney, and sparks from getting out.

Connecting to Your Appliance

Order Multiple Components and Pipe Lengths:

304L Stainless Steel Rigid Liner304L Stainless Steel Rigid Liner
304L Stainless Steel Rigid Liner
  Pipe Diameter   Qty.     Price
6 in. lengths     $
12 in. lengths     $
18 in. lengths     $
24 in. lengths     $
36 in. lengths     $
48 in. lengths     $
Rigid Chimney Cap, Inside MountRigid Chimney Cap, Inside Mount
Rigid Chimney Cap, Inside Mount
    $
Rigid Flat Top PlateRigid Flat Top Plate
Rigid Flat Top Plate
    $
Rigid Liner Terra Cotta Top PlateRigid Liner Terra Cotta Top Plate
Rigid Liner Terra Cotta Top Plate
    $
Rigid Liner Support ClampRigid Liner Support Clamp
Rigid Liner Support Clamp
    $
Rigid Liner Storm CollarRigid Liner Storm Collar
Rigid Liner Storm Collar
    $
Rigid Liner Tee, Snout, and Clean Out CapRigid Liner Tee, Snout, and Clean Out Cap
Rigid Liner Tee, Snout, and Clean Out Cap
    $
Total:

We also have 316L Rigid Chimney Liners

The Original Online Chimney Supply Co.