Google Plus IconFacebook IconTwitter IconYouTube IconCart IconChimney IconSkype IconTool IconVideo IconChevron IconClose IconArrow - UpArrow - DownEnvelope Icon

Square Flex Liner Components

Square chimney liner components are custom made to your specifications.

Note: Square chimney liner components are custom made to your specifications, and are not refundable. Please contact us if you have any questions.

9 Items

per page
Set Descending Direction
  1. Square Flat Top Plate
    Square Flat Top Plate
    As low as $99.99

    The Flat Plate can be trimmed down with a good pair of tin snips. 18" x 18".

  2. Square Terra Cotta Tile Top Plate
    Square Terra Cotta Tile Top Plate
    As low as $0.00

    The Terra Cotta Top Plate comes with stainless steel screws to secure the top plate via a friction fit. See our Terra Cotta Top Plate Sizing Chart.

  3. Square Chimney Cap
    Square Chimney Cap
    As low as $119.99

    Quick connect square rain cap with screen, wind guard, and quick connect clamp system. The rain cap fits on the outside of the top plate collar.

  4. Square to Square Flexible Liner Connector
    Square to Square Flexible Liner Connector
    As low as $99.99

    Square liner to liner connector with female to male dripless seam. Connect flex to flex, rigid to flex, and more. Please order one liner connector for every 25 feet of liner.

  5. Square to Round Flexible Liner Connector
    Square to Round Flexible Liner Connector
    As low as $0.00

    Mates a dripless connection between square flex liner and the round opening or vertical pipe on your appliance.

  6. Square Pulling Cone
    Square Pulling Cone
    As low as $99.00

    The pulling cone makes the job of installing a chimney liner easier. Use it to help pull the liner through the chimney. Quick to connect and disconnect from our Square stainless steel chimney liner.

  7. Square Tee and Tee Cap
    Square Tee and Tee Cap
    As low as $179.99

    The tee has an square shaped body and is attached to the bottom of a chimney pipe / liner. The horizontal (snout) of the tee is round 10" long and fits into the thimble of your chimney wall.

  8. Square Bottom Plate
    Square Bottom Plate
    As low as $99.99

    The Square Flat Bottom Plate is 18"x18" with a square collar to accept the square chimney liner at the bottom. Can be trimmed down if needed with a pair of good tin snips.

  9. Square Mesh Bottom Plate
    Square Mesh Bottom Plate
    As low as $67.99

    For standard fireplace bottom termination. Great for transitioning from a liner to the fireplace smoke chamber. Our 18"x18" mesh bottom plate features a quick connect collar to secure the liner.

9 Items

per page
Set Descending Direction