Google Plus IconFacebook IconTwitter IconYouTube IconCart IconChimney IconSkype IconTool IconVideo IconChevron IconClose IconArrow - UpArrow - DownEnvelope Icon

Chamber Tech 2000

Chamber-Tech 2000 is a lightweight insulating morter designed to insulate, strengthen and streamline fireplace smoke chambers by reshaping. Chamber-Tech 2000 may be parged or troweled.

$99.99

Chamber-Tech 2000 is a lightweight insulating morter designed to insulate, strengthen and streamline fireplace smoke chambers by reshaping. Chamber-Tech 2000 may be parged or troweled. If you have a rough, deteriorated, uninsulated and improperly formed smoke chamber, then Chamer-Tech 2000 is the answer. It will insulate the smoke chamber and reduce conduction to combustible materials, while adding needed structural strength and reshaping the chamber to improve efficient flow of gas and smoke.

Must be installed at a minimum of 1.5" thickness onto 4" nominal thickness solid masonry units. UL listed when installed according to directions. Cure time is approximately 24 hrs. One 30 lb. (5 gallon) bucket covers 4.8 square feet at 1.5" thickness.

Specifications

  • Minimum 1 1/2" Thickness of Chamber-Tech 2000 required
  • Masonry Can Be As Thin As 4" Nominal Thickness
  • Combustibles Can Be Touching The Masonry
  • Brings Most Smoke Chambers "Up To Code"
  • Reduce Your Risk Of Fire and Smoke Leaks
  • Can Be Used On Any Masonry Smoke Chamber Configuration
  • Can Be Built Up To Any Thickness
  • Adheres To Any Masonry Surface

More Info

Write Your Own Review
You're reviewing:Chamber Tech 2000
Your Rating