DuraVent Dura Tech Class A Pipe 10" to 14"
Dura-Vent DuraTech Class A Chimney Pipe is offered in large diameters of 10", 12", and 14". If you require a different diameter, please contact us for special orders. DuraTech is UL 103 listed and designed for use with 1700 degree Fahrenheit chimney system such as zero clearance or masonry fireplaces, furnaces, boilers, water heaters, and more. Requires 2" clearance to combustible materials.
Shop DuraVent Dura Tech Class A Pipe 10" to 14"
Helpful Links
Filtered result: 10 of 10
From$320.99
DuraTech Class A Chimney Pipe 10" to 14"
DuraTech Class A chimney pipe is available in 10", 12" and 14" diameters which are very common sizes required for venting an open fireplace. DuraTech Class A chimney pipe is tested and listed to the UL 103 standard. Designed and tested for applications which experience 1700 degrees Fahrenheit such as... Read More
From$270.99
DuraTech Roof Flashing 10" to 14"
DuraTech Class A chimney flashing is available for a variety of roof pitches. This vented flashing is constructed from galvalume steel. Use this flashing to weatherproof where the chimney pipe is penetrating the roof. Intended to be used on shingled roofs. Available for either 0/12 thru 6/12 roof pitches and... Read More
From$64.99
DuraTech Storm Collar 10" to 14"
The DuraTech Storm Collar is used to seal off the Roof Flashing where the pipe is coming through the top of the flashing. The Storm Collar is required for any roof penetration. The Storm Collar will fit around the outside of the pipe and sit over the flashing, preventing rain... Read More
From$185.99
DuraTech Anchor Plate 10" to 14"
Use the DuraTech Anchor Plate to attach the DuraTech chimney pipe to a masonry fireplace outlet or pre-fab zero clearance fireplace (check firpelace Owner's Manual for approval). Bolt directly to the firpeace to start your chimney pipe. This will only attach to DuraTech chimney pipe. The Anchor Plate provides a... Read More
From$534.99
DuraTech Spark Arrestor Rain Cap 10" to 14"
The DuraTech Chimney Rain Cap with Spark Arrestor will prevent any rain, weather and animals from entering the chimney pipe. The chimney cap easily attaches and unattaches for service and cleanings. Fabricated from stainless steel. The chimney cap is required to maintain the UL listing of the the pipe. Note:... Read More
From$153.99
DuraTech Wall Strap 10" to 14"
Use the DuraTech Wall Strap to support and stabilize the chimney pipe to the side of the home or inside a chase. The Wall Strap will ensure the 2" clearance that is necessary for the UL listing. A Wall Strap is required every 4' of vertical chimney pipe. The Wall... Read More
From$1,214.99
DuraTech Class A Elbow 10" to 14"
The DuraTech 30 degree elbow is used to offset the chimney pipe around obstructions such as rafters, roof joists, or ridge poles. One elbow included. Most installations will require a quantity of two elbows. Offsets and angles greater than 30 degrees are not approved and void the UL103 listing. Fabricated... Read More
From$208.99
DuraTech Elbow Strap 10" to 14"
Use the DuraTech Elbow Strap when offsetting the pipe with the elbow kit. The Elbow Strap will help support the weight of the pipe on the offset. The Elbow Strap is required when using the Elbow Kit. For longer offsets an additional Elbow Strap may be required. Straps are 30"... Read More
From$674.99
DuraTech Attic Insulation Shield 10" to 14"
The DuraTech Attic Insulation Shield is used when the Class A chimney pipe is passing through an attic space to prevent any insulation from touching and potentially blowing onto the chimney pipe. The Attic Shield can sit over the support box or Firestop Joist Shield when the pipe is passing... Read More
From$593.99
DuraTech Firestop Joist Shield 10" to 14"
The DuraTech Firestop Joist Shield is used when the chimney pipe is passing through a floor or ceiling, other than those that include the Ceiling Support. The Firestop sits on the underside of the framing and is adjustable to cover various framing sizes. Measurement Chart: DuraTech Firestop Joist Shield 10"... Read More
DIY Center
(AKA ‘The Rockford Files’)
From video tutorials to product walkthroughs, we have a variety of DIY resources just for you! Click the button below to view our entire library.
Our 316Ti flexible chimney liner and chimney liner components have passed the rigorous testing at the Underwriters Laboratories with best in class status and are UL Listed. So if you are looking for UL listed chimney liner sold directly to homeowners, then look no further than Rockford Chimney
