Google Plus IconFacebook IconTwitter IconYouTube IconCart IconChimney IconSkype IconTool IconVideo IconChevron IconClose IconArrow - UpArrow - DownEnvelope Icon

Co-Linear High Wind Chimney Cap and Liner Kit

Use the High Wind Co-Linear Chimney Cap and Liner Kit to vent your gas or pellet stove and connect your fresh air intake - all in one cap!

As low as $412.99

The Crown Mount High Wind Co-Linear Chimney Caps are the best option for venting a gas or pellet fireplace insert or stove into a masonry chimney in a windy area. If you currently experience high winds blowing your pilot light out, the High Wind Co-Linear Chimney Cap is ideal for you. The design of the cap prevents any wind from entering, while still allowing the exhaust gases to vent out of the cap.

This unique chimney cap can accommodate the exhaust as well as the fresh air intake. No need to cut a hole in the side of the home. Utilize the chimney for all your fresh air needs. The cap separates the exhaust and fresh air intake to ensure that none of the exhaust gas can get pulled down the intake line. The Co-Linear Chimney Cap is fixed on a 17" x 17" plate and is available in either a 3" exhaust with 3" air intake OR 4" exhaust and 3" air intake. The Co-Linear Chimney Caps are constructed from 304L stainless steel.

Features:

  • 304L stainless steel High Wind Chimney Cap
  • Connect both the exhaust liner and fresh air intake liner in one High Wind Chimney Cap
  • Includes 35' of 430 stainless steel flexible liner for fresh air intake
  • Includes 35' of 430 stainless steel flexible liner for exhaust
  • Includes four stainless steel hose clamps

Applications:

  • Venting a gas stove or gas fireplace insert into a masonry chimney along with the fresh air intake
  • Venting a pellet stove or pellet fireplace insert into a masonry chimney along with the fresh air intake
  • This particular kit is ideal for windy areas
  • The crown mount plate installs onto the clay tile with silicone or to the chimney crown with masonry anchors (purchased separately)

If connecting to a pellet stove, you will need a connector to connect the flex liner to the exhaust hole. The Appliance Connector is used to connect vertically to the top of the stove. The Tee Connector is used to connect horizontally to the back of the stove. Please choose the connector selection in the options box above.

Write Your Own Review
You're reviewing:Co-Linear High Wind Chimney Cap and Liner Kit
Your Rating