Google Plus IconFacebook IconTwitter IconYouTube IconCart IconChimney IconSkype IconTool IconVideo IconChevron IconClose IconArrow - UpArrow - DownEnvelope Icon

Draw Collar for Wood Stove

No more smoke-filled rooms! The Draw Collar solves the problems of smoking wood burning stoves and inserts by creating draw before you even light a fire! Simply plug it in and gather your supplies.

As low as $363.99

No more smoke-filled rooms!

The Draw Collar solves the problems of smoking wood burning stoves by creating draw before you even light a fire! Simply plug it in and gather your supplies; by the time you are ready to light the fire, you will have established draw. So no more smoke filled rooms, no smoke smell in your furniture, no soot on your walls.

Draw Collar for Wood Burning Stoves:

It is half the height of the original model and it has a built-in thermal sensor. This model is designed to be installed by replacing a 6" section of double wall or single wall black pipe. Available in 6, 7, & 8 inch models.

  • No fan or moving parts - completely silent
  • Electrically heats the flue to create draw
  • Pennies to operate
  • Less creosote buildup
  • Prevents reverse draft
  • It's guaranteed! If the Draw Collar does not create draw as promised, you will receive a full refund — no risk!
  • Patent pending

Installation Manual


How does the Draw Collar work?
The Draw Collar uses a heating element to preheat the flue to create draw prior to lighting a fire.

Can the Draw Collar be installed horizontally?
Yes. It will function exactly the same way as in vertical applications.

Does the Draw Collar change required clearances?
No. The Draw Collar has been subjected to rigorous testing, and will not change the clearance requirements.

Can the cord rest on the fireplace? Can I use an extension cord?
Yes, the cord is made up of high grade temperature resistant wire and covered with a high temperature sleeving, and is designed to withstand those high temps. And yes, you can use an extension cord if you need to in order to reach an outlet.

How much power does the Draw Collar use?
The Draw Collar uses 3.8 amps at 120v.

How long does the Draw Collar take to create draw?
It depends on the conditions and flue configuration. Most applications take 5-10 minutes, but may take longer in extreme circumstances. You can test to see if draw is established by lighting a match, blowing it out and seeing if the smoke pulls towards the flue.

How long can the Draw Collar be left on?
The Draw Collar may be left on 24 hrs a day 7 days per week if needed. It is designed with a thermal sensor which will turn the unit on and off as the temperature reaches a set point. Leaving the Draw Collar on allows it to prevent any reverse draft, which keeps the cold air and any smoky smells from coming down the flue when the stove or insert is not in use or the fire dies down.

Write Your Own Review
You're reviewing:Draw Collar for Wood Stove
Your Rating