Google Plus IconFacebook IconTwitter IconYouTube IconCart IconChimney IconSkype IconTool IconVideo IconChevron IconClose IconArrow - UpArrow - DownEnvelope Icon

Ventis HE350 Zero Clearance Wood Fireplace

Approx. Heating Area: 1,000 - 2,800 sq. ft.

Max Output: 95,000 BTU/h

Starting at $4199

$4,199.00

The HE350 Zero Clearance Wood Fireplace is a perfect blend of elegance and power. The enormous 4.28 cubic foot firebox is capable of holding up to 60 pounds of hardwood with an impressive 25" maximum log size. This high efficient wood fireplace is capable of heating a large space while burning up to 10 hours. The 1.6 grams per hour emission rating is well under the EPA's 2020 standard and the non-catalytic design makes the fireplace easy to burn. The HE350 uses an automated combustion air intake system that allows the fire to reach the perfect temperature before going into slow burn mode. The giant double glass doors provide an impressive viewing area, making it the centerpiece of any room.

Features:

    • High-efficiency 2020 EPA certified appliance
    • Recommended heating area: 1,000 - 2,800 sq.ft 
    • Premium quality blower included 176 CFM
    • Fresh air intake adapter included
    • 69.7% optimum efficiency
    • 1.6 g/h average particulate emissions rate
    • High heat-resistant C-cast baffle
    • Stainless-steel secondary-air system improving gas combustion
    • 10 hour Maximum burn time
    • Non-catalytic combustion technology
    • Moulded refractory bricks
    • Flue outlet diameter: 8''
    • Approved Chimney Type: Rock-Vent Class A chimney system & more
    • Minimum chimney height: 15 ft.  

Specifications & Manual

Ventis HE350 Fireplace Product Manual & Specs

Ventis HE350 Specifications
Depth - Overall 28 1/8"
Height - Overall 43 3/8"
Width - Overall 50 3/4"
Firebox dimensions (Depth) 17 7/8"
Firebox dimensions (Front Width) 25 3/8"
Firebox dimensions (Back Width) 20 7/8"
Firebox dimensions (Height) 17"
Maximum log length 25"
Door opening dimensions (Width) 33"
Door opening dimensions (Height) 12 3/4"
Type of Door Double, glass with cast iron frame
Glass Surface 14 7/8" w X 13 1/2" h (per door)
Maximum output - EPA test wood 43,021 BTU/h
Maximum input - seasoned cord wood 95,000 BTU/h
Weight 665 lb (302 kg)
Firebox volume (cu. ft.) 4.28
Glass Type Ceramic glass
Center line of flue outlet to the back 11 7/8"
Center line of flue outlet to the side 25 3/8"
Canadian Standard (emissions) CSA B415.1-10
USA standard (emissions) EPA
Canadian Standard (safety) ULC S610
USA standard (safety) UL 127
Mobile Home Installation Approval No
Type of Fuel Wood
Type of Chimney  UL 103 HT (2100°F) / CAN/ULC S629
Minimum chimney height (feet) 15
Log positioning Over width
Recommended Heating Area (sq. ft.) 1,000-2,800
Optimum efficiency 69.7%
Emissions (grams/hour) 1.6 g/h
Baffle High heat-resistant C-cast
Recommended chimney diameter 8"
Warranty Limited lifetime
Tested or/and listed as per applicable standards by An accredited laboratory

Minimum Clearances to Combustibles

Ventis HE350 Minimum Clearances to Combustibles*
Clearance - ceiling (measured from the platform on which the appliance is installed)** 84"
Clearance - combustible side mantle to unit 8"
Clearance - side wall 24"
Clearance - minimum floor protection in front of the fireplace 16" - 32" depending on installation (see pg. 36 in manual)
* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

Optional Accessory Details

Forced Air Kit

The Forced Air Kit allows you to heat other rooms of the home adding to the heating capacity of the Ventis HE350 Fireplace. Use a 6" insulated flex pipe (not included) to send additional heat throughout the home. The Forced Air Kit must be a minimum of 10' away from the fireplace and can heat a room up to 50' away. The Forced Air Kit can be positioned on either side of the fireplace providing flexibility for the installation.

25' Insulated Flex Pipe

Use the 6" x 25' Insulated Flex Pipe with the Forced Air Kit to add additional heat to other rooms in the home. The Insulated Flex Pipe is ULC S110 and/or UL 181 listed and meets the minimum heat rating of 250 degree that is required for installation. The Insulated Flex Pipe can be cut if needed.

Hot Air Gravity Kit (Modern Style)

The Hot Air Gravity Kit offers a way to reclaim more heat from the fireplace without having a blower. The grill mounts on the wall above the fireplace to allow the heat from inside the chase to naturally draft out into the room. The Modern Style Grill is a contemporary look that can blend in with any room.

Write Your Own Review
You're reviewing:Ventis HE350 Zero Clearance Wood Fireplace
Your Rating