on all orders to the lower 48 states
With its compact design, the Osburn 1700 wood fireplace insert can be installed in a fireplace with the minimum dimensions of 21 1/2" h x 27 1/2" w x 12 7/8" d. With the minimum depth of 12 7/8", this model is extremely versatile and fits in most fireplace openings. Even so, it offers a performance of up to 65,000 BTU/hr and heats your space of 500 - 1,800 square feet. The included 144-CFM blower helps maximize the stove's energy performance, and the very low emission rate, even at normal operating temperatures, makes the Osburn 1700 insert an excellent choice for those seeking an environmentally friendly but ultra-efficient source of heat.
|Osburn 1700 Insert Specifications|
|Minimum fireplace opening (Width)||27 1/2"|
|Minimum fireplace opening (Height)||21 1/2"|
|Minimum fireplace opening (Depth)||12 7/8"|
|Firebox dimensions (Depth)||13 1/2"|
|Firebox dimensions (Width)||19 5/8"|
|Firebox dimensions (Height)||11 7/8"|
|Maximum log length||18"|
|Door opening dimensions (Width)||17 1/4"|
|Door opening dimensions (Height)||8 3/4"|
|Type of Door||Single, glass with cast iron frame|
|Glass Surface||15 3/4" x 9 3/8"|
|Weight||361 lb (172 kg)|
|Firebox volume (cu. ft.)||1.9|
|Minimum floor protection in front of unit||18" CAN/16"USA|
|Glass Type||Ceramic glass|
|Depth - Overall||22 3/8"|
|Height - Overall||21 1/4"|
|Width - Overall||27 1/8"|
|Center line of flue outlet to the back||5 3/4"|
|Center line of flue outlet to the side||12 3/4"|
|Canadian Standard (emissions)||CSA B415.1-10|
|USA standard (emissions)||EPA|
|Canadian Standard (safety)||ULC-S628|
|USA standard (safety)||UL 1482/UL 737|
|Maximum output - EPA test wood||23,300 BTU/h|
|Maximum output - seasoned cord wood||65,000 BTU/h|
|Type of Fuel||Wood|
|Type of Chimney (°F)||Liner - ULC-S635, CAN/ULC-S640, UL1777|
|Minimum chimney height (feet)||15'|
|Log positioning||Over width|
|Recommended Heating Area (sq. ft.)||500-1,800|
|Steel thickness (top)||5/16"|
|Emissions (grams/hour)||1.26 g/h|
|Baffle||High heat-resistant C-cast|
|Recommended chimney diameter||6"|
|Osburn 1700 Insert Minimum Clearances to Combustibles*|
|Clearance - top (measured from the platform on which the appliance is installed)**||84"|
|Clearance - combustible side mantle to unit||9"|
|Clearance - combustible top mantle to unit||27"|
|Clearance - side wall to unit||16"|
|Clearance - minimum floor protection in front of the fireplace||16" US / 18" CA|
|* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).|
|** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.|
The door overlay is required to complete the installation. The door overlay is available in either black or brushed nickel finish. The options for the door overlay allow you to tailor the look of the insert to your liking. The black door overlay gives the insert more of a traditional stove appearance, while the brushed nickel door overlay gives the insert a more sleek, modern appearance. The door overlay easily installs to the stove with a few bolts.
The faceplate is the component that flashes around the insert and covers the fireplace opening. The faceplate is available in two sizes 29" x 44" and 32" x 50". The size you choose should be based on the opening of your existing fireplace. Choose the 29" x 44" faceplate size if the opening of your fireplace is less than 29" x 44". If your fireplace is opening is greater than 29" x 44", you will want to select the 32" x 50" faceplate size.
The faceplate trim is required for finishing the installation of the faceplate and completes the wood insert installation. The faceplate trim is available in either black or brushed nickel. Choose the size of the faceplate trim based on the size of the faceplate you choose. You can either match the faceplate trim to the same color as the door overlay. Or, you can mismatch to give the look of the fireplace insert some added style and dimension.
The 5" fresh air oval intake kit is required if you plan on connecting a fresh air intake pipe. The oval adapter kit comes with the oval adapter, 2 clamps and the fresh air intake register hood. The oval adapter is intended for 5" fresh air intake pipe. You will have to manually ovalize the flexible intake pipe to make the connection to the adapter. The oval adapter can be positioned on either side of the stove.
The rigid fire screen allows you to burn wood in the insert with the door open just like an old-time fireplace. Hear the crackle of the wood, watch the flames dance around in the firebox, and relax around the wood insert on a cold winter's night. The rigid fire screen is easy to install and easy to remove when you are ready to load more wood. The insert should not be burning with the door open without the fire screen.
5" Fresh Air Intake Register with Airtight Damper opens and closes the fresh air supply to a wood stove insert. It's simple mechanism makes it possible to close the damper tightly when the wood insert is not in use. This will ensure the wood insert is not being cooled while the stove is not in use. Link to Fresh Air Intake Kit with Damper Manual
The insulated flexible fresh air intake pipe is the perfect choice for adding fresh air to the stove insert. Measuring 4' in length and 5" diameter, this is the perfect option for the short runs right through the side of the fireplace. The oval fresh air adapter kit is required to complete the installation.
The insulated flexible fresh air intake pipe is the perfect choice for adding fresh air to the stove insert. Measuring 10' in length and 5" diameter and gives you added length for longer runs. The oval fresh air adapter kit is required to complete the installation.
The insulated flexible fresh air intake pipe is the perfect choice for adding fresh air to the stove insert. Measuring 5" in diameter and 25' in length this long insulated fresh air intake pipe can virtually be installed anywhere. The oval fresh air adapter kit is required to complete the installation.