Google Plus IconFacebook IconTwitter IconYouTube IconCart IconChimney IconSkype IconTool IconVideo IconChevron IconClose IconArrow - UpArrow - DownEnvelope Icon

Osburn Inspire 2000 Wood Fireplace Insert

Approx. Heating Area: 500 - 2,100 sq. ft.
Max Output: 75,000 BTU/h
Starting at $2649

$2,649.00

If you are looking for a sleek, modern design that is un-intrusive to your living space, the Osburn Inspire 2000 is the wood fireplace insert for you. This unit is highly efficient and does not lack in aesthetics. The Osburn Inspire 2000 insert offers modernism, comfort, and functionality. Order yours today to start enjoying this insert's 77% optimal efficiency, 176 CFM heat circulating blower, and 8 hour maximum burn time.

The recommended heating area is 500 - 2,100 square feet and requires a minimum fireplace opening of 24 5/8" h x 29" w x 20 3/4" d as well as a minimum chimney height of 12 feet. The firebox will accept the maximum log length of 20" which you can watch burn through the large glass measuring 24 13/16" x 18 1/2".

Features:

    • High-efficiency appliance 2020 EPA approved
    • Ultra-quiet blower with variable speed control included (CFM) : 176
    • Recommended eating area : 500 - 2,100 square feet
    • Color: Black
    • Non-catalytic combustion technology
    • Optimum efficiency : 77%
    • Emissions (grams/hour) : 1.54 g/h
    • Baffle : High heat-resistant C-cast
    • Maximum burn time : 8 hours
    • Firebox lined with refractory bricks for better heat distribution
    • Stainless-steel secondary-air system improving gas combustion
    • Recommended chimney diameter : 6"
    • Approved Chimney Liner: Rock-Flex Stainless Flexible Liner Kit

Specifications & Manual

Osburn Inspire 2000 Wood Insert Manual

Osburn Inspire 2000 Wood Insert Dimensions

Osburn Inspire 2000 Faceplate Dimensions & Install

Osburn Inspire 2000 Insert Specifications
Minimum fireplace opening (Width) 29"
Minimum fireplace opening (Height) 24 5/8"
Minimum fireplace opening (Depth) 20 3/4"
Firebox dimensions (Depth) 16 3/4"
Firebox dimensions (Width) 21"
Firebox dimensions (Height) 11 3/4"
Maximum log length 20"
Door opening dimensions (Width) 20"
Door opening dimensions (Height) 8 1/4"
Type of Door Single, glass with cast iron frame
Glass Surface 24 13/16" x 18 1/2"
Weight 420 lb (191 kg)
Firebox volume (cu. ft.) 2.4
Minimum floor protection in front of unit 18" CAN/16"USA
Glass Type Ceramic glass
Depth - Overall 20 3/4"
Height - Overall 24"
Width - Overall 28 1/2"
Center line of flue outlet to the back 5 5/8"
Center line of flue outlet to the side 13 1/2"
Canadian Standard (emissions) CSA B415.1-10
USA standard (emissions) EPA
Canadian Standard (safety) ULC-S628
USA standard (safety) UL 1482/UL 737
Maximum output - EPA test wood 28,600 BTU/h
Maximum output - seasoned cord wood 75,000 BTU/h
Type of Fuel Wood
Type of Chimney (°F) Liner - ULC-S635, CAN/ULC-S640, UL1777
Minimum chimney height (feet) 12'
Log positioning Over width
Recommended Heating Area (sq. ft.) 500-2,100
Steel thickness (top) 3/8"
Optimum efficiency 77%
Emissions (grams/hour) 1.54 g/h
Baffle High heat-resistant C-cast
Recommended chimney diameter 6"
Warranty Limited lifetime

Minimum Clearances to Combustibles

Osburn 1700 Insert Minimum Clearances to Combustibles*
Clearance - top shelf to unit 27"
Clearance - combustible side mantle to unit 9"
Clearance - combustible top mantle to unit 27"
Clearance - combustible side wall to unit 16"
Clearance - minimum floor protection in front of the fireplace 16" US / 18" CA
* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

Faceplate Option Details

Narrow Faceplate U-Shape

The Narrow Faceplate is U-shaped and used when the fireplace insert is going to be tight inside the fireplace and there is not much gap between the unit and the existing opening. It also provides the fireplace insert with an even more modern look. The U-Shaped Narrow Faceplate measures 1.75" on three sides. U-Shape Faceplate Installation Guide

Narrow Faceplate

The Narrow Faceplate is a 4-sided faceplate used when the insert is tight inside the fireplace and there is not much gap between the unit and the existing opening. This will provide the insert with a thin flashing and modern appearance. You could elevate the insert by adding a row of bricks on the fireplace floor to raise the stove and the bottom portion of the Narrow Faceplate will give the insert the boxed in appearance of a picture frame. Narrow Faceplate Installation Guide

32" x 50" Cuttable Faceplate in 16 gauge

The 32" x 50" Cuttable Faceplate is used to flash around the fireplace insert when there is a wide gap between the insert and the fireplace opening. The Cuttable Faceplate is 16 gauge and can be cut using a grinder with a cutoff wheel. You can cut the faceplate to any shape needed. If you have a nice arched fireplace, you can cut the faceplate to match the arch preventing the flashing from covering a decorative arch. Cuttable Faceplate Installation Guide

Optional Accessory Details

Moulded Refractory Panel Kit for Minimalist Base and Insert

The Moulded Refractory Panel Kit is a great way to enhance the heat inside the stove which provides for a cleaner burning unit. The Moulded Panel Kit is also great for maintenance with less joints to clean out compared to fire bricks. The Minimalist Base Kit will have an extra panel to cover the clean-out trap.

5" Fresh Air Intake Kit Oval

The 5" Fresh Air Oval Kit is required if you plan on connecting a fresh air intake pipe. The oval adapter kit comes with the oval adapter, 2 clamps and the fresh air intake register hood. The oval adapter is intended for 5" fresh air intake pipe. You will need to manually ovalize the flexible intake pipe to make the connection to the adapter. The oval adapter can be positioned on either side of the insert.

5" Fresh Air Intake Register with Airtight Damper

The 5" Fresh Air Intake Register with Airtight Damper opens and closes the fresh air supply to a wood insert. It's simple mechanism makes it possible to close the damper tightly when the wood insert is not in use. This will ensure the wood insert is not being cooled while it is not in use. Fresh Air Intake with Damper Installation Guide

Product Video

More Information
BrandOsburn
Write Your Own Review
You're reviewing:Osburn Inspire 2000 Wood Fireplace Insert
Your Rating