Google Plus IconFacebook IconTwitter IconYouTube IconCart IconChimney IconSkype IconTool IconVideo IconChevron IconClose IconArrow - UpArrow - DownEnvelope Icon

Osburn Inspire 2000 Wood Stove

Approx. Heating Area: 500 - 2,100 sq. ft.

Max Output: 75,000 BTU/h

Pedestal Options Available

Starting at $2349

$2,349.00

The Osburn Inspire 2000 freestanding wood stove features both sleek style and the wood burning efficiency you are looking for. Design your Inspire 2000 stove by first choosing one of the three base options available: minimalist base to keep the unit low, steel base to add firewood storage, or the soapstone base to add storage and radiant heat from the soapstone. With the base kits, there is a style available for everyone's taste.

The Osburn Inspire wood stove has impressive heating capabilities in addition to it's beautiful design. Heat your living space from 500 to 2,100 square feet with a maximum burn time of 8 hours and maximum heat output of 75,000 BTU/h. The firebox volume at 2.4 allows you to burn logs up to 20" in length.

Features:

    • High-efficiency appliance 2020 EPA approved
    • Recommended heating area : 500 - 2,100 square feet
    • Color: Black
    • Maximum log length : 20"
    • Overall firebox volume : 2.4
    • Non-catalytic combustion technology
    • Optimum efficiency : 77%
    • Emissions (grams/hour) : 1.54 g/h
    • Baffle : High heat-resistant C-cast
    • Maximum burn time : 8 hours
    • Firebox lined with refractory bricks for better heat distribution
    • Stainless-steel secondary-air system improving gas combustion
    • Recommended chimney diameter : 6"

Specifications & Manual

Osburn Inspire 2000 Wood Stove Manual

Osburn Inspire 2000 Wood Stove Dimensions

Osburn Inspire 2000 Minimalist Base

Osburn Inspire 2000 Steel Base

Osburn Inspire 2000 Soapstone Base

Osburn Inspire 2000 Wood Stove Specifications
Depth - Overall 24 15/16"
Height - Overall 36 9/16"
Width - Overall 27 7/8"
Firebox dimensions (Depth) 17 11/16"
Firebox dimensions (Width) 21 1/4"
Firebox dimensions (Height) 11 15/16"
Type of Fuel Wood
Maximum log length 20"
Log positioning Over width
Recommended Heating Area (sq. ft.) 500-2,100
Firebox volume (cu. ft.) 2.4
Door opening dimensions (Width) 20"
Door opening dimensions (Height) 8 3/8"
Type of Door Single, glass with steel frame
Glass Surface 20 1/4" x 9 1/2"
Glass Type Ceramic glass
Weight 537 lb (244 kg)
Recommended chimney diameter 6"
Minimum chimney height (feet) 12'
Minimum floor protection in front of unit 18" CAN/16"USA
Center line of flue outlet to the back 6 3/8"
Center line of flue outlet to the side 14"
Maximum output - EPA test wood 28,600 BTU/h
Maximum output - seasoned cord wood 75,000 BTU/h
Steel thickness (top) 5/16"
Optimum efficiency 77%
Emissions (grams/hour) 1.54 g/h
Baffle High heat-resistant C-cast
Canadian Standard (emissions) CSA B415.1-10
USA standard (emissions) EPA
Canadian Standard (safety) ULC-S627
USA standard (safety) UL 1482/UL 737
Warranty Limited lifetime

Minimum Clearances to Combustibles

Osburn Inspire 2000 Wood Stove Minimum Clearances to Combustibles*
Single Wall Stove Pipe Double Wall Stove Pipe
Clearance - back wall 11" US / 14 1/2" CA 6" US / 6" CA
Clearance - placed in a corner 10" US / 10" CA 7" US / 7" CA
Clearance - side wall 16" US / 17" CA 16" US / 17" CA
Clearance – top (measured from the platform on which the appliance is installed)** 84" US / 84" CA 84" US / 84" CA
Clearance - minimum floor protection in front of the fireplace 16" US / 18" CA 16" US / 18" CA
* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

Base Kit Option Details

Minimalist Base

The Osburn Inspire 2000 minimalist base allows you to get creative with the look of the base. You can use non-combustible material placed under the stove to give the stove the proper clearance. A non-combustible base measuring 27.625" wide, 24.9375" deep, and 10" thick must be constructed under the stove. You can use any masonry material to construct the base. For example, if the stove is sitting on floor tile, you could use block to elevate the stove and place matching tile over the blocks to match the floor. The opportunities are endless with the look of the stove. Note: You must use non-combustible masonry material for the base. The Inspire 2000 with minimalist base should not be used as a fireplace insert.

Steel Base

The Steel Base Kit is painted black to match the stove and provides a wood storage space underneath the stove. The word storage space is a beautiful way to store your firewood and provides easy access to reload the firebox. The steel base kit measures 27.375" wide, 19.75" deep, and 16.25" tall.

Soapstone Base

The Soapstone Base Kit enhances the elegant style of the Inspire 2000 wood stove and provides a wood storage compartment. The Soapstone Base will increase the radiant heat output of the stove. Soapstone is one of the best thermal storage materials in the world and will radiate heat for hours after the stove has cooled down. The soapstone base kit measures 27.25" wide, 19.875" deep, and 16.125" tall.

Optional Accessory Details

Blower Assembly with Variable Speed Control (130 CFM)

Looking for a way to increase the efficiency of the stove? The blower assembly is a great addition. The 130 CFM blower fan will help push the heat from the stove and increase the heating capacity. The blower is so quiet you would never even know it was on. Link to Blower Manual

Quick Connect Thermodisc Kit

The Quick Connect Thermodisc Kit is a must have if you are thinking about adding the blower to the stove. The Thermodisc automatically turns on the blower when the stove gets up to temperature and automatically turns the blower off when the stove cools down. No need to worry if you forget to turn off the blower, the thermodisc will take care of that for you. Link to Thermodisc Manual

Moulded Refractory Panel Kit

The Moulded Refractory Panel Kit is a great way to enhance the heat inside the stove which provides a cleaner burning unit. The Moulded Panel Kit is also great for maintenance with less joints than the fire brick to clean out. The Minimalist Base Kit will have an extra panel to cover the clean out trap.

5" Fresh Air Intake Register with Airtight Damper

The 5" Fresh Air Intake Register with Airtight Damper opens and closes the fresh air supply to a wood stove. It's simple mechanism makes it possible to close the damper tightly when the wood stove is not in use. This will ensure the wood stove is not being cooled while the stove is not in use. Link to Fresh Air Intake Manual

Product Video

More Information
BrandOsburn
Write Your Own Review
You're reviewing:Osburn Inspire 2000 Wood Stove
Your Rating