on all orders to the lower 48 states
The Osburn 2000 freestanding stove is one of the most popular units in the Osburn family of wood stoves. Its cast-iron door, which features the distinctive lines you've come to expect from Osburn, gives it a look combining the contemporary and the traditional. With a 2.4 cubic foot firebox, the Osburn 2000 will delight the most serious of wood stove enthusiasts who want both style and heating power. Also equipped with a 130 CFM blower, the Osburn 2000 is the most sought-after model of the season!
|Osburn 2000 Wood Stove Specifications|
|Height - Overall||33 1/8"|
|Width - Overall||27"|
|Depth - Overall||29"|
|Firebox dimensions (Height)||11 7/8"|
|Firebox dimensions (Width)||21"|
|Firebox dimensions (Depth)||16 3/4"|
|Firebox volume (cu. ft.)||2.4|
|Type of Fuel||Wood|
|Maximum log length||20"|
|Log positioning||Over width|
|Recommended Heating Area (sq. ft.)||500-2,100|
|Door opening dimensions (Height)||9"|
|Door opening dimensions (Width)||17 1/2"|
|Type of Door||Single, glass with cast iron frame|
|Glass Surface||17 1/8" x 10 1/4"|
|Glass Type||Ceramic glass|
|Weight||390 lb (177 kg)|
|Minimum chimney height (feet)||12|
|Recommended chimney diameter||6"|
|Maximum output - seasoned cord wood||75,000 BTU/h|
|Maximum output - EPA test wood||28,600 BTU/h|
|Center line of flue outlet to the back||6 5/8"|
|Center line of flue outlet to the side||13 1/2"|
|Canadian Standard (emissions)||CSA B415.1-10|
|USA standard (emissions)||EPA|
|Canadian Standard (safety)||ULC S627|
|USA standard (safety)||UL 1482, UL 737|
|Mobile Home Approved||Yes, with fresh air intake|
|Steel thickness (top)||5/16"|
|Emissions (grams/hour)||1.54 g/h|
|Baffle||High heat-resistant C-cast|
|Osburn 2000 Wood Stove Minimum Clearances to Combustibles*|
|Single Wall Stove Pipe||Double Wall Stove Pipe|
|Clearance - back wall||11" US / 14 1/2" CA||6" US / 6" CA|
|Clearance - placed in a corner||10" US / 10" CA||7" US / 7" CA|
|Clearance - side wall||16" US / 17" CA||16" US / 17" CA|
|Clearance – top (measured from the platform on which the appliance is installed)**||84" US / 84" CA||84" US / 84" CA|
|Clearance - minimum floor protection in front of the stove||16" US / 18" CA||16" US / 18" CA|
|* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).|
|** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.|
The Door Overlay is required to complete the installation of the Osburn 2000 stove. The Door Overlay is available in either black or brushed nickel finish. The options for the Door Overlay allow you to tailor the look of the stove to your liking. The Black Door Overlay gives the stove more of a traditional stove appearance, while the Brushed Nickel Door Overlay gives the stove a more sleek & modern look. The Door Overlay easily installs on the stove with a few bolts.
The Pedestal Kit base option provides the stove with more of a modern appearance. The pedestal base can often hide an unsightly fresh air intake behind the stove if you plan to install one. The base of the pedestal measures 12.75" height, 25.125" wide, and 19" depth. The pedestal option also comes with a large ash drawer for convenient cleaning.
The ornamental Black Cast Iron Legs give the stove a more traditional appearance. The legs are 10.5" tall. The width between the legs measure 26.875" and the depth between the legs measure 20.25". The Leg Kit includes an Ash Drawer which makes for convenient cleaning.
The Brushed Nickel Plated Cast Iron Legs are an ornamental leg kit that provide a traditional look to the Osburn 2000 wood stove. If paired with the nickel plated door, this will really enhance the look of the stove. The legs measure 10.5" tall, 26.875" width between legs, and 20.25" depth between legs. The Leg Kit includes an Ash Drawer for convenient cleaning.
The Black Cast Structural Legs provide the stove with a modern look. Sleek and contemporary would be the best way to describe the Structural Legs. The legs measure 10.125" tall, 24.5" width between legs, and 17.625" depth between legs. The Structural Legs come along with an Ash Drawer for convenient cleaning.
The Structural Leg Kit is also available in the brushed nickel plated finish. If paired with the brushed nickel door overaly, it will give the stove a very modern and contemporary look. The legs measures 10.125 tall, 26.25" width between legs, and 20.875 depth between legs.
The Fresh Air Intake Kit is a great accessory for any stove. This will ensure the stove has the proper combustion air to run efficiently. If your home is very air tight, you would need an air intake kit. The kit comes with the intake adapter for the stove, 2 clamps and the hood register for outside. A 5" fresh air pipe is required to complete the job. Choose between the leg or pedestal model for which base you are using on the Osburn 2000 wood stove.
The 5" Fresh Air Intake Register with Airtight Damper opens and closes the fresh air supply to a wood stove. It's simple mechanism makes it possible to close the damper tightly when the wood stove is not in use. This will ensure the wood stove is not being cooled while the stove is not in use.
The Insulated Flexible Fresh Air Intake Pipe is the perfect choice for adding fresh air to the stove. Measuring 4' in length and 5" diameter, this is the perfect option for the short runs. The Fresh Air Intake Kit is required to complete the installation.
The Rigid Fire Screen allows you to burn wood in the stove with the door open just like an old-time fireplace. Hear the crackle of the wood, watch the flames dance around in the firebox and relax around the wood stove on a cold winter's night. The Rigid Fire Screen is easy to install and easy to remove when you are ready to load more wood. The Osburn 2000 wood stove should not be burning with the door open without the Fire Screen.
The Quick Connect Thermodisc Kit automatically turns on the blower when the stove gets up to temperature and automatically turns the blower off when the stove cools down. No need to worry if you forget to turn off the blower, the Thermodisc will take care of that for you.
The Glass Ash Lip is intended to sit on the ash lip to give the stove a more modern look. The glow of the fire on the ash lip will also enhance the ambiance of the stove.