Google Plus IconFacebook IconTwitter IconYouTube IconCart IconChimney IconSkype IconTool IconVideo IconChevron IconClose IconArrow - UpArrow - DownEnvelope Icon

Napoleon Pellet Stove NPS45

Approx. Heating Area: 2,000 sq. ft.
Max Output: 42,500 BTU/h
SALE PRICE $2444

$2,444.00

A renewable energy source, environmentally friendly, economical, convenient… these are just some of the reasons a Napoleon pellet stove is the perfect solution to heat your home. The freestanding stove provides Zone Heating furnace performance and a reliable heating source. The NPS45 gives you uncompromising pellet performance year after year with the comfort of knowing you have selected a product made with true craftsmanship and advanced technological innovations. All sales are final as this item will be discontinued soon with the EPA 2020 changes.

Exclusive Features:

  • Four stage FAILSAFE™ system features:
    1) an automatic blower over-ride switch
    2) a high temperature limit switch
    3) a low air pressure switch
    4) a power failure safety shut down for your peace of mind
  • Thermostatic control capability via wall mount or easily installed thermostatic remote control
  • Digital control provides adjustment to both the fuel feed rate and combustion blower speed. This unique feature maximizes the stove's performance when using lesser quality fuel. Even low grade fuel (although not recommended) can be burned in the NPS45 due to its ability to fine tune the fuel combustion air ratio

Features:

  • EPA exempt
  • Convenient top, loading for easy fueling
  • Automatic ignition
  • Stove hopper pellet capacity is 55 lbs (capable of handling a full bag of pellets eliminating partial bags left open)
  • Variable speed auger and variable speed blower provide maximum comfort and control
  • Heavy-duty, 1/8" thick, seamless heat exchange tubes radiate heat into the room for maximum efficiency even after the stove is shut down
  • Hinged door for convenient access to combustion chamber for routine maintenance…no tools required!
  • Handy cleaning/filling rake
  • Built-in heat exchange cleaner rod maintains cleanliness and efficiency of heat exchange tubes
  • Effective clean glass airwash system
  • Optional hopper extension allows longer burn times without refilling providing a total loading capacity of 80 lbs
  • Optional outside air kit with through the wall vent
  • Optional decorative PHAZER® ceramic log set
  • President’s Limited Lifetime Warranty

NPS45 Specifications
Fuel Pellet
BTU Output 8,500 – 42,500
Hopper Capacity 55 lbs
Area Heated up to 2,000 sq. ft.
Burn rate 1-5 lbs per hour
Burn time 55 hours low heat
Flue Diameter 3"
Electrical rating 115 volts, 3.6 Amps, 60 Hz
Blower kit Included
Mobile Home Approved Yes
Additional Information
Small pellets will increase or decrease the stated burn rates and burn times
Differences of plus or minus 20% may occur depending on fuel quality
THIS HEATER HAD BEEN TESTED TO ASTM E 1509, UL 1482, ULC S627 and ULC 5628

Napoleon NPS45 Pellet Stove Product Manual
UNIT INCLUDES: CONCEALED MILLIVOLT, THERMOSTATIC READY, CONTROL PANEL, HEAT EXCHANGER, BLACK TRIVET, DUAL PAINTED BLACK ACCENT RODS, 120 CFM CONVECTION FAN, PEDESTAL WITH LARGE CONCEALED ASH PAN, AUTO IGNITOR, AIR WASH SYSTEM, 55 LB HOPPER. 8,000 UP TO 40,000 BTU ft. S. SUITABLE FOR MOBILE HOMES.
Note: For optimum performance, it is recommended that 4 in. diameter venting be utilized in high altitude regions (above 4,000ft) or when vertical venting exceeds 15 ft.

Write Your Own Review
You're reviewing:Napoleon Pellet Stove NPS45
Your Rating