Rock-Vent Insulated Class A Stainless Steel Chimney Pipe System

Features a 304L Stainless Steel Inner Wall and Galvalume Steel Outer Wall with .016" thickness. This is a great choice to use inside the home for standard solid-fuel applications.

Features a 304L Stainless Steel Inner Wall and 430 Stainless Steel Outer Wall with .016" thickness. This is a great choice for lining your standard solid-fuel applications.

Features a 316L Stainless Steel Inner Wall and 430 Stainless Steel Outer Wall. This is a great choice for lining your standard all-fuel, including coal and oil-fired, applications.

We offer a package that includes the common items needed to complete a Through the Wall installation for ease of ordering.

We offer a package that includes the common items needed to complete a Pitched or Flat ceiling installation for ease of ordering.

The chimney pipe Telescoping Section allows you to have the perfect length of chimney when and wherever you need it. It's an adjustable length that extends from 14" to 22".

Rock-Vent Class A Chimney Pipe Elbow Kits are available in 15 and 30 degree options. Each elbow kit includes 2 elbows and 1 elbow support. Elbows are used to offset obstructions in your install.-->

The Rock-Vent Insulated Tee and Tee Cap will be located at the base of the chimney in your installation. The Tee can be installed on the interior or the exterior of a structure. Includes Tee Cap.-->

The Rock-Vent Insulated Short Body Tee and Tee Cap will be located at the base of the chimney in your installation. Use a shortened body tee to fit into tighter spaces.

The Standard Chimney Cap for Rock-Vent Class A chimney systems is a 430 stainless steel cap that you can be proud of. Easily installs with a quick connect clamp.

The Wood Style Chimney Cap for Rock-Vent Class A chimney systems is a 430 stainless steel cap that you can be proud of. A good choice to provide some pest protection but with less creosote buildup....

The Wide Open Style Chimney Cap is a 430 stainless steel cap that you can be proud of. For solid fuel installations with creosote clogging issues, this is the ideal wide open cap.

This Wind Directional Chimney Cap has been solving wind related down draft problem for decades. This proven solution is ready to connect to Rock-Vent Class A chimney pipe. It is a no screen cap.-->

The Spark Arrestor Screen can be installed in most Rock-Vent Class A Chimney Caps. A great safety assurance to add to the Standard, Wood Style, and Wide Open Style chimney caps.

If you are installing Rock-Vent Class A Chimney Pipe under a stone slate or a custom shroud, then you will need this pipe end cap. The 316L Chimney Pipe End Cap closes off the top section of pipe ...

This Rock-Vent Vented Class A Flashing is constructed of high quality, corrosive resistant galvalume or stainless steel. We offer it in flat and a variety of other roof pitches.

Rock-Vent Vented Peak Flashing is used when coming through the peak of the roof. Available in stainless steel and galvalume. Includes storm collar. Please enter your desired pitch.

The Rock-Vent Metal Roof Flashing is a one of a kind design that solves the challenges of metal roof flashings. Available in galvalume and stainless steel and in a variety of pitches. Storm collar ...

The Snow Wedge is especially important for snow diversion on metal roofs. Available in low, medium, or steep pitches to accommodate a variety of roof slopes.

The Rock-Vent Storm Collar is made to fit the exact dimension of the pipe. Constructed of 304L stainless steel. Use to seal the inner edge that contacts the chimney pipe with silicone sealant.

The Rock-Vent Class A Roof Support is designed to provide support for the chimney pipe at the roof line. Easily adjusts to any roof pitch and fits pipe diameters of 5" to 8", 10" and 12".

The Rock-Vent Telescoping Roof Braces adjust from 5 to 9 feet and fits pipe diameters of 5", 6", 7", 8", 10", and 12". Constructed of galvanized with a stainless steel band and galvanized telescopi...

Use the Support Box Truss Spanner to eliminate the need to frame the Support Box on all sides. Adjusts from 16" - 24" on center and fits pipe diameters of 5", 6", 7", and 8".

The Square Ceiling Support is used on flat, cathedral, or sloped ceilings. The bottom of the ceiling support must extend a minimum of 3 inches into the room. Supports up to 60' of chimney pipe from...

The Round Ceiling Support is used on flat, cathedral, or sloped ceilings. Supports up to 60' of chimney pipe from a floor or ceiling joist. Constructed of 24 gauge galvalume steel painted black.-->

There are many different applications for the Flat or Pitched Ceiling Trim Collar. We offer an outstanding selection of trim collars for your installation - a solution for every installation scenar...

Use the Attic Insulation Shield when a chimney passes through an unoccupied attic to keep insulation or any other combustible materials from contacting the chimney pipe.

The Firestop Radiation Shield is galvanized with top flanges that ensure a proper fit into the framed opening. Adjustable upper section extends from 11" to 19" to completely cover the framing.

The Wall Pass-Thru Non-Insulated Thimble is used when a Class A chimney passes horizontally thru a combustible wall. Adjustable from 4" to 8". Includes Universal Adapter and Finishing Cover.

Use the Universal Adapter to adapt from Class A to single or double wall black connector pipe. Needed for all Wall Pass-Thru and Ceiling Supported installations.

The Transition Plate allows you to connect our Rock-Vent Class A to our Rock-Flex Chimney Liner or Rigid Chimney Liner in a masonry chimney restoration.

Use the Anchor Plate to attach Rock-Vent Class A to a masonry fireplace or metal-cased fireplace and to certain types of heaters. Masonry or factory build fireplace 10"x10".

Unsurpassed in the chimney industry! When the Standard Wall Support is used on Wall Pass-Thru installations, the Wall Support provides both vertical load bearing and lateral support.

The Extended Wall Support is just what you need to avoid the hassle of cutting through or offsetting an eave. It provides up to 14" of adjustment off of the vertical structure.

This is an optional, but beneficial, way to support your exterior installation. Provides 2" to 5" of adjustment and supports 60' of chimney pipe. Available in galvalume or 304L stainless steel. -->

Use the Wall Stand-Off in conjunction with the Tee Support to stabilize the chimney. Install every 8' to provide lateral support and will adjust 2" to 6" from the structure. Not made to provide ver...