Enerzone Destination 2.3-I Wood Burning Insert

Product Images

Enerzone Destination 2.3-I Wood Burning Insert

Enerzone Destination 2.3-I Wood Burning Insert

Enerzone Destination 2.3-I Wood Burning Insert

Enerzone Destination 2.3-I Wood Burning Insert

Rigid Firescreen

Rigid Firescreen

29" X 44" Faceplate Backing Plate Kit

29" X 44" Faceplate Backing Plate Kit

29" X 50" Faceplate Backing Plate Kit

29" X 50" Faceplate Backing Plate Kit

44" x 6" Bottom Faceplate Backing Plate

44" x 6" Bottom Faceplate Backing Plate

50" x 6" Bottom Faceplate Backing Plate

50" x 6" Bottom Faceplate Backing Plate

5" Fresh Air Intake Kit

5" Fresh Air Intake Kit

Approx. Heating Area: 500 - 2,100 sq. ft.Max Output: 75,000 BTU/hTax Credit Eligible

Approx. Heating Area: 500 - 2,100 sq. ft.

Max Output: 75,000 BTU/h

Tax Credit Eligible

As low as$3,499.00

Product Details:

The Enerzone Destination 2.3-I wood burning insert is a fresh take on the design of wood burning fireplace inserts. The contemporary cast iron flush mount surround is unlike anything in the industry and is the perfect picture frame for the large 18" x 11 7/8" glass door. The amazing appearance is a bonus on top of the powerful heating capabilities for the cold winter months.

Producing up to 75,000 BTUs allows the destination 2.3-I insert to heat up to 2,100 square feet. The 2.4 cubic foot firebox is capable of handling a 20" log and offers up to an 8 hour burn time on one load of wood. The Destination 2.3-I insert is EPA certified non-catalytic secondary combustion wood stove with an optimum efficiency of 79%.

Do you have a large fireplace opening? If so, an optional backer plate is available to extend the cast iron surround and conceal the fireplace opening. The backer plate is available in 29" tall by 44" wide and 29" tall and 50" wide for large fireplace openings. A 90 CFM blower is included and is easily accessible through a streamlined drawer system that is unlike any other manufacturer in the industry.

The Enerzone Destination 2.3-I inserts contemporary design and heating capacity distinguish it from the competition and is sure to be the focal point of any room. The Enerzone Destination 2.3-I insert also qualifies for the wood and pellet stove tax credit through the end of 2032. See below for more details.

    Specifications & Manual

    Enerzone Destination 2.3-I Wood Insert Owners Manual

    Enerzone Destination 2.3-I Wood Insert Specifications

    Enerzone Solution 2.3-I Wood Insert Specifications
    Combustion technology Non-catalytic
    High-efficiency certified appliance Yes, EPA 2020 approved
    Maximum log length 20”
    Log positioning Loading over width
    Chimney diameter 6”
    Flue outlet diameter 6”
    Type of chimney CAN/ULC S629, UL 103 HT (2100 °F)
    Minimum chimney height (feet) 12’
    Baffle type C-Cast or equivalent
    Approved for a mobile home installation No
    Shipping Weight 478 lb (217 kg)
    Door type Single, glass with cast iron frame
    Glass type Ceramic glass
    Glass surface – dimensions (Width X Height) 18" X 11 7/8''
    Glass air-wash system Yes
    Overall dimension (Height) 25"
    Overall dimension (Width) 35 7/8"
    Overall dimension (Depth) 29 1/2"
    Door opening – dimension (Height) 8 3/4"
    Door opening - dimension (Width) 21"
    Firebox – dimension (Height) 11 7/8"
    Firebox – dimension (Width) 21"
    Firebox – dimension (Depth) 16 3/4"
    Firebox lined with refractory bricks for better heat distribution Yes
    Stainless-steel secondary-air system improving gas combustion Yes
    Adjustable threaded legs Yes
    Steel thickness – body 3/16"
    Steel thickness – top 5/16"
    Fireplace opening – minimum (Height) 23 3/4"
    Fireplace opening – minimum (Width) 28 7/8"
    Fireplace opening – minimum (Depth) 19 5/8"
    USA standard (emissions) EPA Method 28
    Canadian Standard (emissions) CSA B415.1-10
    USA standard (safety) UL 1482, UL 737
    Canadian standard (safety) ULC S628
    Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
    Warranty Limited lifetime

    Minimum Clearance to Combustibles:

    Clearances to combustibles* Canada United States
    Clearance – top (measured from the platform on which the appliance is installed)** 84" 84”
    Clearance – combustible side mantle to unit 9" 9”
    Clearance - Top mantle to unit 27" 27”
    Clearance – combustible side wall to unit 16” 16”
    Clearance – minimum floor protection in front of the appliance 18” 16”
    Clearance - from the top of the unit to the shelf 19”
    Clearance – from the top of the insert to the shelf 27”
    * The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
    ** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.



    • High-efficiency appliance 2020 EPA approved
    • Blower Kit with Variable Speed Control
    • Maximum burn time : 8 hours
    • Non-catalytic combustion technology
    • Maximum log length: 20"
    • 1.54 g/hr. emissions
    • EPA 2020 approved
    • 77% optimum efficiency
    • 75,000 BTUs
    • Limited lifetime warranty

    Help & Documents:

    Optional Accessories

    Faceplate (32" X 44")

    The Faceplate Backing Plate is used when the standard flashing for the Enerzone Destination 2.3-I is not large enough to cover the opening of the fireplace. The standard Destination 2.3-I surround measures 35.875" x 25". The Faceplate Backing Plate can be used to extend the surround to seal off the fireplace. The Backing Plate is available in two sizes: 44" x 29" and 50" x 29". The backing plate easily installs to the back of the standard surround.

    Faceplate Backing Plate

    In the event the current fireplace is elevated above the hearth, then the Faceplate Backing Plate Kit is installed. The Bottom Faceplate Backing Plate is used to finish off this type of installation. This backing plate will provide the look of a picture frame around the insert. The Bottom Faceplate Backing Plate is available in both 44" x 6" and 50" x 6" sizes.

    5" Fresh Air Intake Kit

    The 5" Fresh Air Oval Kit is required if you plan on connecting a fresh air intake pipe. The oval adapter kit comes with the oval adapter, 2 clamps and the fresh air intake register hood. The oval adapter is intended for the 5" fresh air intake pipe. You will have to manually ovalize the flexible intake pipe to make the connection to the adapter. The oval adapter can be positioned on either side of the fireplace insert.

    Rigid Firescreen

    The Rigid Fire Screen allows you to burn wood in the fireplace insert with the door open just like an old-time fireplace. Hear the crackle of the wood, watch the flames dance around in the firebox and relax around the wood insert on a cold winter's night. The Rigid Fire Screen is easy to install and easy to remove when you are ready to load more wood. The fireplace insert should not be burning with the door open without the firescreen.

    Tax Credit Information

    The Enerzone Destination 2.3-I wood burning insert is EPA rated and has a HHV rating of 75% which qualifies for the wood and pellet stove tax credit through the end of 2032. From January 2023 through December 2032 you can receive up to a 30% tax credit for the installation and parts required, such as chimney liner and insulation. This is one of the largest tax credits the wood and pellet stove industry has ever had. If you are looking to update your old drafty fireplace consider the Enerzone Destination 2.3-I wood burning insert.

    More information on the Tax Credit

    Enerzone Tax Certificate

    Enerzone Efficiency Summary


    Frequently Bought Together:

    DIY Center

    (AKA ‘The Rockford Files’)

    From video tutorials to product walkthroughs, we have a variety of DIY resources just for you! Click the button below to view our entire library.


    Need Help?

    We are here to answer all of your questions




    Our 316Ti flexible chimney liner and chimney liner components have passed the rigorous testing at the Underwriters Laboratories with best in class status and are UL Listed. So if you are looking for UL listed chimney liner sold directly to homeowners, then look no further than Rockford Chimney

    Customer Testimonials

    Back in July you gave me excellent advice re. sizing/purchasing a flue liner for the chimney associated with my wood stove. I'd like to thank you once agai... More

    —AE Northfield, MN

    A few weeks ago I ordered a chimney liner system for my fireplace insert. Your salesman recommended the liner system plus the insulating blanket. I just wa... More

    —AH Happy customer

    Just got around to installing my new smooth flexible liner and deluxe terra cotta cap (wow). The quality of your product is second to none. Very pleased an... More

    —B.B. from Massachusetts

    Thanks so much for the great tech service from Dennis, very knowledgable, friendly and proffessional.Your website is the best, beats your competition by fa... More

    —Bill in Knoxville

    Sue and Dennis, I received the final part of my order yesterday (the chimney cap that actually fits over the chimney chase). It looks wonderfu... More

    —CC, VA

    Hello, I was shopping for an fireplace insert and called RCS to ask why they were so much cheaper than my local guy, the reply was " we sell thousand of th... More

    —Chris, PA.