Selkirk Class A Chimney Pipes
Selkirk Metalbestos Ultra-Temp Class A insulated chimney pipe and components are UL-103 listed as a multi-fuel system and provides a 2" clearance to combustibles. Inner pipe fabricated with 304L stainless steel. Selkirk Metalbestos Ultra-Temp is compatible with Selkirk's UT, SS, SS2, Sure Temp (Not compatible with Super-Vent).
Shop Selkirk Class A Chimney Pipes
Filtered result: 29 of 29
From$145.99
Selkirk Metalbestos All Fuel Class A Chimney Pipe
Stainless Steel Inner and Outer Chimney Pipe The Metalbestos Chimney System (MCS) is ideal for venting residential heating appliances burning wood, #2 oil, and natural and LP gas. They have been specifically designed for today's modern, high-efficiency “airtight” wood stoves. They are designed for gravity (natural draft), non-positive internal pressure... Read More
Selkirk Metalbestos All Fuel Class A Chimney Pipe
Selkirk Metalbestos All Fuel Class A Chimney Pipe
As low as$145.99
Applications: Stainless Steel Inner and Outer Chimney Pipe The Metalbestos Chimney System (MCS) is ideal for venting residential heating appliances burning wood, #2 oil, and natural and LP gas. They have been specifically designed for today's modern, high-efficiency “airtight” wood stoves. They are designed for gravity (natural draft), non-positive internal pressure venting only. The MCS is usable on any appliance having a power burner (such as an oil furnace) if that... Read More
From$81.99
Selkirk Chimney Pipe Adapter
The Chimney Pipe Adapter is used to connect Selkirk Class A chimney pipe to either Double Wall or Single Wall Stove Pipe. The Pipe Adapter is used for new installations since it needs to attach to the bottom of the Selkirk Class A pipe. If you are using Rock-Vent Double... Read More
Selkirk Chimney Pipe Adapter
Selkirk Chimney Pipe Adapter
As low as$81.99
Applications: The Chimney Pipe Adapter is used to connect Selkirk Class A chimney pipe to either Double Wall or Single Wall Stove Pipe. The Pipe Adapter is used for new installations since it needs to attach to the bottom of the Selkirk Class A pipe. If you are using Rock-Vent Double Wall Stove Pipe to connect to this adapter, you will also need the Double Wall to Class A adapter for... Read More
From$169.99
Metalbestos Class A Round Top Chimney Cap
The Round Top Chimney Cap is designed with a dome to exclude rain and leaves, and a lower skirt to deflect wind for proper chimney draft. Fabricated from 430 stainless steel. In the 5", 6", 7", and 8" sizes, the Round Top is designed with three legs that slide down... Read More
Metalbestos Class A Round Top Chimney Cap
Metalbestos Class A Round Top Chimney Cap
As low as$169.99
Applications: The Round Top Chimney Cap is designed with a dome to exclude rain and leaves, and a lower skirt to deflect wind for proper chimney draft. Fabricated from 430 stainless steel. In the 5", 6", 7", and 8" sizes, the Round Top is designed with three legs that slide down over the outside of the chimney. A cinch band is then positioned over the legs and tightened to hold the... Read More
From$28.99
Selkirk Class A Storm Collar
The Selkirk Class A Storm Collar is designed to fit on Selkirk Class A round chimney pipe just above the roof flashing. The upper edge of the Storm Collar should be waterproofed with silicone sealer to prevent any water from leaking between the Storm Collar and chimney pipe. Fabricated from... Read More
Selkirk Class A Storm Collar
Selkirk Class A Storm Collar
As low as$28.99
Applications: The Selkirk Class A Storm Collar is designed to fit on Selkirk Class A round chimney pipe just above the roof flashing. The upper edge of the Storm Collar should be waterproofed with silicone sealer to prevent any water from leaking between the Storm Collar and chimney pipe. Fabricated from aluminum. Intended for use with Selkirk chimney pipes with diameters: 6" I.D. has 8" O.D., 7" I.D. has 9" O.D,... Read More
From$191.99
Selkirk Class A Adjustable Flashing
Flashings are used to seal the opening where the chimney penetrates the roof to divert rain and snow down from the roof and away from the chimney system. Chimney silicone sealant will come in handy with this installation. Selkirk flashing is fabricated from aluminum. A series of adjustable flashings are... Read More
Selkirk Class A Adjustable Flashing
Selkirk Class A Adjustable Flashing
Selkirk Class A Adjustable Flashing
As low as$145.99
Applications: Flashings are used to seal the opening where the chimney penetrates the roof to divert rain and snow down from the roof and away from the chimney system. Chimney silicone sealant will come in handy with this installation. Selkirk flashing is fabricated from aluminum. A series of adjustable flashings are available depending on your roof pitch. A flat and low pitch flashing is used to seal flat and low pitch... Read More
$186.99
Selkirk Universal Roof Brace Kit
The Selkirk Roof Brace Kit can be used whenever there is a need to stabilize the chimney above the roof level. The Roof Brace Kit should be used at a midpoint on the chimney. Braces adjust from 4' to 6'. Fits Selkrik Ultra Temp Class A Pipe I.D. diameters 5"... Read More
Selkirk Universal Roof Brace Kit
Selkirk Universal Roof Brace Kit
Selkirk Universal Roof Brace Kit
$186.99
Applications: The Selkirk Roof Brace Kit can be used whenever there is a need to stabilize the chimney above the roof level. The Roof Brace Kit should be used at a midpoint on the chimney. Braces adjust from 4' to 6'. Fits Selkrik Ultra Temp Class A Pipe I.D. diameters 5" through 14". Roof Brace Kit Requirements Height Brace Qty Up to 4' None 5' to 10' 1 Over 10' 1... Read More
From$28.99
Selkirk Class A Pipe Locking Band
All Selkirk Metalbestos insulated pipe lengths are furnished with a Locking Band, for extra security when assembling your pipe. Locking Bands come pre-assembled, with captured nut and screw. Read More
Selkirk Class A Pipe Locking Band
Selkirk Class A Pipe Locking Band
As low as$28.99
Applications: All Selkirk Metalbestos insulated pipe lengths are furnished with a Locking Band, for extra security when assembling your pipe. Locking Bands come pre-assembled, with captured nut and screw. Read More
$373.99
Selkirk Universal Rubber Boot Flashing Kit
Our UL-listed kit allows rubber flashings to be safely used for Selkirk chimney pipe installations on metal corrugated roofs with pitches up to 12/12. This kit includes a special storm collar, engineered for this kit for maximum weather protection. The kit also includes: rubber boot, spacer kit and boot mounting... Read More
Selkirk Universal Rubber Boot Flashing Kit
Selkirk Universal Rubber Boot Flashing Kit
Selkirk Universal Rubber Boot Flashing Kit
$373.99
Applications: Our UL-listed kit allows rubber flashings to be safely used for Selkirk chimney pipe installations on metal corrugated roofs with pitches up to 12/12. This kit includes a special storm collar, engineered for this kit for maximum weather protection. The kit also includes: rubber boot, spacer kit and boot mounting screws. Fits 6, 7, and 8 inch chimneys. See installation instructions (PDF). Read More
From$71.99
Selkirk Class A Wall Band
The Selkirk Wall Band is used along a wall to provide a 2" clearance and stability. It is also useful for suspending offsets, and required at 8' or closer intervals to stabilize the chimney, wherever it is supported along a vertical wall. Read More
Selkirk Class A Wall Band
Selkirk Class A Wall Band
As low as$71.99
Applications: The Selkirk Wall Band is used along a wall to provide a 2" clearance and stability. It is also useful for suspending offsets, and required at 8' or closer intervals to stabilize the chimney, wherever it is supported along a vertical wall. Read More
From$147.99
Selkirk Dripless Stove Pipe Adapter with Coupler
Designed for new installations, the Dripless Stove Pipe Adapter with Coupler can be installed by twist-locking the Coupler on the DSAC into the first section of Selkirk Class A chimney pipe, and connects to Single Wall Stove Pipe. Length of adapter is 15". The end of the adapter may need... Read More
Selkirk Dripless Stove Pipe Adapter with Coupler
Selkirk Dripless Stove Pipe Adapter with Coupler
As low as$147.99
Applications: Designed for new installations, the Dripless Stove Pipe Adapter with Coupler can be installed by twist-locking the Coupler on the DSAC into the first section of Selkirk Class A chimney pipe, and connects to Single Wall Stove Pipe. Length of adapter is 15". The end of the adapter may need to be cut to length to adapt to the stove pipe. Finishing Band sold separately. Note: Not compatible with Selkirk... Read More
From$143.99
Selkirk Class A Insulated Wall Thimble
Our Selkirk Insulated Wall Thimble installs quickly and eliminates the need for using individual firestops. Interior plate has black matte finish. The round shielding acts as a radiation shield and provides the required 2" airspace clearance to combustibles. The two sections telescope to accommodate 6" to 11" wall thickness. Read More
Selkirk Class A Insulated Wall Thimble
Selkirk Class A Insulated Wall Thimble
As low as$143.99
Applications: Our Selkirk Insulated Wall Thimble installs quickly and eliminates the need for using individual firestops. Interior plate has black matte finish. The round shielding acts as a radiation shield and provides the required 2" airspace clearance to combustibles. The two sections telescope to accommodate 6" to 11" wall thickness. Read More
$171.99
Selkirk Universal Roof Support Assembly for 6 to 8 in. Dia. Pipe
This new design gives you the flexibility of securing the 6", 7" or 8" diameter chimney with a heavy duty band. The Selkrik Roof Support band allows you to slide the installed length vertically to properly position this section in the system. Installation requirements are the same as our standard... Read More
Selkirk Universal Roof Support Assembly for 6 to 8 in. Dia. Pipe
Selkirk Universal Roof Support Assembly for 6 to 8 in. Dia. Pipe
$171.99
Applications: This new design gives you the flexibility of securing the 6", 7" or 8" diameter chimney with a heavy duty band. The Selkrik Roof Support band allows you to slide the installed length vertically to properly position this section in the system. Installation requirements are the same as our standard Roof Support Package. The Universal Roof Support Assembly can hold 30' of pipe total – up to 20' can be... Read More
From$500.99
Selkirk Class A Insulated Elbow Kit
The 15° Insulated Elbows can be used for fixed offsets of 15° slope or in pairs for offsets adjustable from 0° to 30° slope. The 30° Insulated Elbow can be used for fixed offsets of 30° slope. Greater angles are prohibited by ULR Standard. Now includes 2 Elbows, 2 Locking... Read More
Selkirk Class A Insulated Elbow Kit
Selkirk Class A Insulated Elbow Kit
As low as$500.99
Applications: The 15° Insulated Elbows can be used for fixed offsets of 15° slope or in pairs for offsets adjustable from 0° to 30° slope. The 30° Insulated Elbow can be used for fixed offsets of 30° slope. Greater angles are prohibited by ULR Standard. Now includes 2 Elbows, 2 Locking Bands and 1 Interior Re-Support, all in one box! Note: Not compatible with Selkirk Super-Vent model. Required: Locking Bands (2... Read More
From$79.99
Selkirk Class A Pitched Ceiling Plate
The Pitched Ceiling Plate provides a finished appearance where the chimney passes through a sloped ceiling. Fits 0/12 to 12/12 range pitch for your installation. Size A B 6" 16 1/2" 19 - 30" 7" 17 1/2" 20 - 31" 8" 18 1/2" 21 - 33" Read More
Selkirk Class A Pitched Ceiling Plate
Selkirk Class A Pitched Ceiling Plate
As low as$79.99
Applications: The Pitched Ceiling Plate provides a finished appearance where the chimney passes through a sloped ceiling. Fits 0/12 to 12/12 range pitch for your installation. Size A B 6" 16 1/2" 19 - 30" 7" 17 1/2" 20 - 31" 8" 18 1/2" 21 - 33" Read More
From$197.99
Selkirk Finish Support Package
The Finish Support Package includes a square trim plate. With proper framing, ceiling supports assure at least 2" minimum clearance to combustibles at the support level and can carry up to 50' of vertical chimney height. The Round Finish Support Package is available in limited quantities. Please see dropdown menu... Read More
Selkirk Finish Support Package
Selkirk Finish Support Package
Selkirk Finish Support Package
As low as$156.99
Applications: The Finish Support Package includes a square trim plate. With proper framing, ceiling supports assure at least 2" minimum clearance to combustibles at the support level and can carry up to 50' of vertical chimney height. The Round Finish Support Package is available in limited quantities. Please see dropdown menu for available sizes. Read More
From$670.99
Selkirk Metalbestos Pitched Ceiling Kit
Ideal for to use with natural draft home heating systems that burn wood, natural gas, lp gas, and #2 oil. It has been specifically designed for today's modern high efficiency wood stoves, wood burning heaters, and for combination fuels in central heating systems. UL103 Standard for safety factory-built chimneys for... Read More
Selkirk Metalbestos Pitched Ceiling Kit
Selkirk Metalbestos Pitched Ceiling Kit
Selkirk Metalbestos Pitched Ceiling Kit
As low as$670.99
Applications: Ideal for to use with natural draft home heating systems that burn wood, natural gas, lp gas, and #2 oil. It has been specifically designed for today's modern high efficiency wood stoves, wood burning heaters, and for combination fuels in central heating systems. UL103 Standard for safety factory-built chimneys for residential type and building heating appliances. Each kit includes: Rain Cap,(430 stainless steel), Storm Collar (aluminum), Roof Support Package, Adjustable... Read More
From$472.99
Selkirk Class A Insulated Tee with Tee Cap
The Insulated Chimney Tee may be used to start chimneys indoors or outdoors using a Wall Support Assembly. A length of Insulated Chimney Pipe is attached to the Tee snout to pass safely through combustible walls. An Insulated Tee Cap is included which can be removed from bottom opening for... Read More
Selkirk Class A Insulated Tee with Tee Cap
Selkirk Class A Insulated Tee with Tee Cap
As low as$472.99
Applications: The Insulated Chimney Tee may be used to start chimneys indoors or outdoors using a Wall Support Assembly. A length of Insulated Chimney Pipe is attached to the Tee snout to pass safely through combustible walls. An Insulated Tee Cap is included which can be removed from bottom opening for inspection and cleanout. Note: Not compatible with Selkirk Super-Vent model. Read More
From$35.99
Selkirk Class A Finishing Collar
The Selkirk Finishing Collar fits over the lower end of a suspended insulated chimney pipe to provide a finished appearance, or is used to attach a Stove Pipe Adapter to the lower end of a chimney or to an Insulated Tee. Read More
Selkirk Class A Finishing Collar
Selkirk Class A Finishing Collar
As low as$35.99
Applications: The Selkirk Finishing Collar fits over the lower end of a suspended insulated chimney pipe to provide a finished appearance, or is used to attach a Stove Pipe Adapter to the lower end of a chimney or to an Insulated Tee. Read More
From$827.99
Selkirk Metalbestos Flat Ceiling Kit
Ideal for to use with natural draft home heating systems that burn wood, natural gas, lp gas, and #2 oil. It has been specifically designed for today's modern high efficiency wood stoves, wood burning heaters, and for combination fuels in central heating systems. UL103 Standard for safety factory-built chimneys for... Read More
Selkirk Metalbestos Flat Ceiling Kit
Selkirk Metalbestos Flat Ceiling Kit
Selkirk Metalbestos Flat Ceiling Kit
As low as$827.99
Applications: Ideal for to use with natural draft home heating systems that burn wood, natural gas, lp gas, and #2 oil. It has been specifically designed for today's modern high efficiency wood stoves, wood burning heaters, and for combination fuels in central heating systems. UL103 Standard for safety factory-built chimneys for residential type and building heating appliances. Each kit includes: Rain Cap (430 stainless steel), Storm Collar (aluminum), Adjustable Flashing 2/12-6/12... Read More
From$178.99
Selkirk Wall Support Kit
The Wall Support is intended for use with the Insulated Tee as an interior or exterior support where the chimney has a lateral connection. It is also useful where the pipe connection passes through a combustible interior or exterior wall. Braces may be fastened to the wall either above or... Read More
Selkirk Wall Support Kit
Selkirk Wall Support Kit
As low as$178.99
Applications: The Wall Support is intended for use with the Insulated Tee as an interior or exterior support where the chimney has a lateral connection. It is also useful where the pipe connection passes through a combustible interior or exterior wall. Braces may be fastened to the wall either above or below the plate for chimneys which penetrate through the wall. Provides 2" to 6" adjustment from the vertical wall. Read More
From$117.99
Selkirk Anchor Plate
The Anchor Plate provides a secure attachment for the chimney to smoke chamber outlet on masonry fireplaces, reducing footing loads and speeding construction. Stainless steel and heavy gauge steel construction for long life. The Anchor Plate connects to the pipe with a twist-lock connection. Note: Not compatible with Selkirk Super-Vent... Read More
Selkirk Anchor Plate
Selkirk Anchor Plate
As low as$117.99
Applications: The Anchor Plate provides a secure attachment for the chimney to smoke chamber outlet on masonry fireplaces, reducing footing loads and speeding construction. Stainless steel and heavy gauge steel construction for long life. The Anchor Plate connects to the pipe with a twist-lock connection. Note: Not compatible with Selkirk Super-Vent model. Pipe Size Dimensions of Anchor Plate 6" 9.25 in. x 9.25 in. 7" 10.25 in. x 10.25 in. 8"... Read More
From$144.99
Selkirk Attic Insulation Shield
The Attic Shield is required where a chimney passes into an unoccupied attic space. Designed to keep blown-in or blanket insulation away from the chimney, and to maintain the mandatory 2 inch clearance to combustibles. Read More
Selkirk Attic Insulation Shield
Selkirk Attic Insulation Shield
As low as$144.99
Applications: The Attic Shield is required where a chimney passes into an unoccupied attic space. Designed to keep blown-in or blanket insulation away from the chimney, and to maintain the mandatory 2 inch clearance to combustibles. Read More
From$57.99
Selkirk Firestop Joist Shield
The Selkirk Firestop Joist Shield is used in floor / ceiling penetrations other than those which include a ceiling support. Not required when passing through roof.
Selkirk Firestop Joist Shield
Selkirk Firestop Joist Shield
As low as$57.99
Applications:
The Selkirk Firestop Joist Shield is used in floor / ceiling penetrations other than those which include a ceiling support. Not required when passing through roof.
From$1,331.99
Selkirk Metalbestos Through the Wall Kit
Ideal for to use with natural draft home heating systems that burn wood, natural gas, LP gas, and #2 oil. It has been specifically designed for today's modern high efficiency wood stoves, wood burning heaters, and for combination fuels in central heating systems. UL103 Standard for safety factory-built chimneys for... Read More
Selkirk Metalbestos Through the Wall Kit
Selkirk Metalbestos Through the Wall Kit
Selkirk Metalbestos Through the Wall Kit
As low as$1,331.99
Applications: Ideal for to use with natural draft home heating systems that burn wood, natural gas, LP gas, and #2 oil. It has been specifically designed for today's modern high efficiency wood stoves, wood burning heaters, and for combination fuels in central heating systems. UL103 Standard for safety factory-built chimneys for residential type and building heating appliances. Each kit includes: Rain Cap, Wall Band, Insulated Tee and Tee Cap, Wall Support... Read More
From$77.99
Selkirk Class A Trimplate Spacer
The Trimplate Spacer is used with Selkirk Class A chimney pipe when installing a Fire Stop or Roof Support Package in a flat ceiling. Size Inside Diameter Outside Diameter 6" 8 1/8" 19" 7" 9 1/8" 21" 8" 10 1/8" 22" Read More
Selkirk Class A Trimplate Spacer
Selkirk Class A Trimplate Spacer
As low as$77.99
Applications: The Trimplate Spacer is used with Selkirk Class A chimney pipe when installing a Fire Stop or Roof Support Package in a flat ceiling. Size Inside Diameter Outside Diameter 6" 8 1/8" 19" 7" 9 1/8" 21" 8" 10 1/8" 22" Read More
From$313.99
Selkirk Roof Support Package
This is an ideal support assembly for freestanding fireplaces and open cathedral ceiling installations. Fits all roof pitches and requires only simple framing. The Selkirk Roof Support mounts easily on to top of roof through opening that allows 2" clearance. Maximum length of chimney which can be suspended below is... Read More
Selkirk Roof Support Package
Selkirk Roof Support Package
As low as$313.99
Applications: This is an ideal support assembly for freestanding fireplaces and open cathedral ceiling installations. Fits all roof pitches and requires only simple framing. The Selkirk Roof Support mounts easily on to top of roof through opening that allows 2" clearance. Maximum length of chimney which can be suspended below is 20' supported. Maximum total length is 30'. The Roof Support Package (RSP) contains one 18" length of pipe, roof brackets... Read More
From$111.99
Selkirk Dripless Stove Pipe Adapter
Dripless Stove Pipe Adapters are used to connect single wall stove pipe to Selkirk Class A chimney systems. They are designed to slip inside single wall stove pipe to contain any creosote dripping down the chimney to inside the stove pipe. The end of the adapter may need to be... Read More
Selkirk Dripless Stove Pipe Adapter
Selkirk Dripless Stove Pipe Adapter
As low as$111.99
Applications: Dripless Stove Pipe Adapters are used to connect single wall stove pipe to Selkirk Class A chimney systems. They are designed to slip inside single wall stove pipe to contain any creosote dripping down the chimney to inside the stove pipe. The end of the adapter may need to be cut to length to adapt to the stove pipe. The Dripless Stove Pipe Adapter is designed for existing installations; it... Read More
$187.99
Selkirk Universal Wall Support / Re-Support Assembly
The Selkirk Universal Wall Support / Re-Support Assembly is designed to support a vertical wall installation above the tee or above an offset. It can also serve as an intermediate support. This universal design will work on 6, 7, and 8” diameters. Vertical Support Chart Diameter Height of Support (ft.)... Read More
Selkirk Universal Wall Support / Re-Support Assembly
Selkirk Universal Wall Support / Re-Support Assembly
$187.99
Applications: The Selkirk Universal Wall Support / Re-Support Assembly is designed to support a vertical wall installation above the tee or above an offset. It can also serve as an intermediate support. This universal design will work on 6, 7, and 8” diameters. Vertical Support Chart Diameter Height of Support (ft.) 5" 29' 6" 28' 7" 25' 8" 20' Read More
$150.99
Selkirk Universal Interior Re-Support
The Selkirk Interior Re-Support assembly allows for two different methods of chimney re-support. The first method is used at the immediate section of chimney above the upper elbow of an offset. With the appropriate Fire Stop Joist Shield in place, clamp the support band around chimney and attach with 6... Read More
Selkirk Universal Interior Re-Support
Selkirk Universal Interior Re-Support
$150.99
Applications: The Selkirk Interior Re-Support assembly allows for two different methods of chimney re-support. The first method is used at the immediate section of chimney above the upper elbow of an offset. With the appropriate Fire Stop Joist Shield in place, clamp the support band around chimney and attach with 6 sheet metal screws. The second means of support is used primarily when the immediate sections of the upper offset do... Read More
Learn About Selkirk Class A Chimney Pipes
DIY Center
(AKA ‘The Rockford Files’)
From video tutorials to product walkthroughs, we have a variety of DIY resources just for you! Click the button below to view our entire library.
Our 316Ti flexible chimney liner and chimney liner components have passed the rigorous testing at the Underwriters Laboratories with best in class status and are UL Listed. So if you are looking for UL listed chimney liner sold directly to homeowners, then look no further than Rockford Chimney
