Clearance Items

$109.99

304L Stainless Steel Rigid Liner Tee, with removable 10 in. horizontal snout, and bottom clean out cap. Laser welded seams ensure a perfect round and sealed fit to our rigid liner pipe. The tee snout has a female end, but if you are using this for a wood burning appliance,... Read More

$84.99

These products do not have any faults - new in box items. Note: Double wall stove pipe is only compatible with the same manufacturer's brand pipe, therefore this can only be used with Selkirk Black Double Wall Pipe. The main listings of Double Wall pipe on our website are not... Read More

$82.99

These products do not have any faults - new in box items. Note: Double wall stove pipe is only compatible with the same manufacturer's brand pipe, therefore this can only be used with Selkirk Black Double Wall Pipe. The main listings of Double Wall pipe on our website are not... Read More

$60.00

This 8 in. x 45-degree adjustable Rock-Vent single wall black stove pipe is on clearance due to some imperfections on the finish. Oil from the tooling leaked onto these elbows and they do not meet our high standards for the parts we fabricate. A little cleaning and touch-up paint will... Read More

$45.00

The Rigid Terra-Cotta Mount Top Plate 6" x 8" 13" is used if you have clay tile in your chimney and it's exposed by 1/2” or more at the top of your chimney. The top plate will pressure bolt to the outside of the protruding clay flue tile. Made with... Read More

$50.00

This 10" WeatherShield Chimney Cap Non Air Cooled Chimney Cap is on clearance due to a few dents on the edge of the cap and the connection collar. The connection collar will take the correct form once the compression sleeve is inside a pipe. The bottom base of the cap... Read More

$125.00

6 inch flex Copper Coated Pot Topper.  Protect chimneys from rain, snow and animals. New condition. Sold as is and non-returnable. One available.

$45.00

6" single wall to 6" double wall adapter. Both ends are female. The adapter only works with Rock-Vent or Ventis double wall stove pipe. New Condition. 11 available, sold as is, non-returnable.  Read More

$60.00

Terra-Cotta Top Plate size 6 x 8 x 8 with one damaged mounting bolt. Still usable with the 3 remaining screws, fastens right on the terra-cotta flue tile. The top plate pressure screws to the tile like a rain cap and gives a great no hassle, finished look. Sold as... Read More

$160.00

6 in. Rock-Vent Double wall Black stove pipe 48 in. length. The pipe has some scratches and dents in the outer shell, and the inner stainless sleeve is free of defects. Two Available. Non-Returnable. Read More

$70.00

This 3" x 36" Pellet pipe is on Clearance due to some light Scratches. This would be perfect for a workshop where the appearance of the pipe is not a necessity. Rock-Vent Pellet Pipe is fabricated with a 304L stainless steel inner wall with a painted black galvalume outer wall... Read More

From$40.00

Pro-Form Direct Vent Pipe available in two different finishes: Galvanized or Powder Coated Black Size: 4" x 6 5/8" For use with gas appliances approved for Pro-Form Direct Vent Pipe System ProForm Catalog 1 available galvanized, 1 available powder coated black. No defects. Read More

$75.00

Pro-Form Vertical Round Co-Axial DV Termination Cap Size: 4" x 6 5/8" Finish: Aluminum For use with Pro-Form Direct Vent Pipe System ProForm Catalog No defects, 1 available. Read More

$350.00

Pro-Form Insert Co-Linear Direct Vent Termination Kit with High Wind Cap & Square Base - Powder Coated Black For use with gas appliances that approve Pro-Form Co-Linear DV. Includes: 3" x 3" Pro Form High Wind Round Cap Square Base Kit 3" x 30' & 3" x 4' Aluminum Flex... Read More

From$155.00

The Insul Plug is a type of thimble plug used to seal up an old thimble hole that is no longer in use. Insert plug in old thimble hole and tighten expansion bolt on face. The insulation will expand, causing a tight fit. Constructed with ceramic fiber insulation. No defects,... Read More

$98.99

The Air-A-Lator is a favorite product for traditional wood burning fireplaces for smart air control and a warmer, cleaner burn. The Air-A-Lator is a leading solution for outside air intake regulation in masonry wood burning fireplaces. By using outside air for combustion, your fireplace burns hotter, cleaner, and safer. The... Read More

$35.00

This 6" x 24" single wall black stove pipe has a few scratches to the finish and the male end was slightly crimped in more. This would be perfect for a wood stove where the appearance of the pipe is not important such as in a workshop or barn. Constructed... Read More

$100.00

This 7" Rock-Vent Class A standard flashing for a 2/12 shingle roof pitch only. Constructed from 304L stainless steel. The opening at the top of the flashing is 10". Storm collar is not included. Sold as is, non-returnable. One available. Read More

$100.00

This 12" round copper chimney pot topper with round clay lid is made for chimney pots that have an inside diameter of 12". In New condition with a copper screen and a round clay lid. This cap comes with the construction adhesive for mounting the cap to the chimney pot.... Read More

$275.00

Stainless Steel Cap 21" x 9 1/2". New Condition. Sold as is. Non-Returnable. One Available.

$40.00

8x24 Single Wall DuraVent Black Pipe. Some scratching that can be repaired with paint. Sold As Is, Non-Returnable. One Available. 

$70.00

6" Single Wall Dura Vent Tee has minor scratching that can be repaired with paint.  This is sold as is and non-returnable. One Available. 

$180.00

The 6" x 11" Square Ceiling Support Box is in new condition but as some scratches and rust that can be cleaned and painted. This is used on a flat ceiling, the bottom of the ceiling support must extend a minimum of 3 inches into the room. Supports up to... Read More

$300.00

The Octagon Copper Chimney Pot Rain Cap has a 9.75" flange (pictured with Protective Film on Copper).  Protects against weather and animal beautifully. Removable octagon lid.

$100.00

Stainless Steel Chimney Cap - Bolt on single flue with flat lid 13" x 13" with 18" mesh screen. Need direct protection for your flue? Then look no further than this easy to install Bolt On Single Flue Stainless Chimney Cap with Flat Lid. Sold As Is. Non-Returnable. One Available. Read More

$85.00

Animal screen 24 inches x 16 inches x 11 inches high. The screen includes a  piano hinge mounting flange 3/4 inch wide. This stainless steel cage would be great to keep critters out of a chimney or flue. Sold As Is. Non-Returnable. One Available. Cage mesh measurements: 24"x16"x11" , -3/4"x1... Read More

$100.00

13x13 Stainless Steel Chimney Cap - Bolt On Single Flue with non -removable flat lid, new condition. Use this easy to install Bolt On Single Flue Stainless Chimney Cap with Flat Lid for direct protection for your flue. You will need 1.5" of clay tile protruding from the chimney crown... Read More

$50.00

5" x 8" x 8" Rigid Terra-Cotta Mount Top Plate. New Condition. Used with a 5" rigid pipe. Pipe clamp not included. The Rigid Terra-Cotta Mount Top Plate is used if you have clay tile in your chimney and it's exposed by 1/2” or more at the top of your... Read More

$200.00

8.625" ID Octagon Stainless Steel Chimney Pot Rain Cap with mounting flange. New condition. Effective and attractive way to cap off your chimney pot. Protects chimneys equipped with chimney pots from rain, snow, and animal intrusion. One available, sold as is, non-returnable. Read More

$75.00

The 8" x 13" Oval Terra Cotta Top Plate size for a 5" x 8.15" oval Liner. Features an oval opening for our Oval Flex Liners. The Oval Terra Cotta Top Plate comes with stainless steel screws to secure the top plate via a friction fit. One available, sold as... Read More

$350.00

8x8 Locktop II damper, Missing Hardware This lock top damper is missing the hardware pack, the cable is included. Will work great for parts or someone that can fabricate the hardware. The Lock Top II Chimney Damper With Cap is the perfect solution for cold & drafty wood burning fireplaces.  Read More

$150.00

This 6” x 36” Rock-Vent 316L inner, 430 outer Class A chimney pipe is on clearance due to a few slight dings on the side of the class A pipe. These are small dings and do not affect the overall performance or safety of the system. This would be perfect... Read More

Sold out

$400.00

The US Fireplace Top Damper 18" x 18" has a dent on the corner, damper still seals tight, provides an energy tight seal for any fireplace while also providing rain and animal protection. Sold as is, non-returnable. One Available. Read More

$750.00

8" x30 Degree Class A Elbow Kit New - Clearance Galvalume Rock-Vent Class A Chimney Pipe Elbow Kits 30 degree options. Each elbow kit includes 2 elbows and 1 elbow support. Elbows are used to offset obstructions such as framing joists in your installation. The elbow support is required between... Read More

$70.00

Selkirk Double Wall 8"x12"Slightly Scratched. Sold as is, non-returnable. One available. Selkirk Double Wall Black Pipe is most commonly used as interior connector pipe. The 8" diameter is the inner diameter measurement. For installed lengths, remember to subtract 1-3/8" per joint. Minimum clearance to combustibles is 8". The maximum recommended... Read More

$60.00

8 3/4" x 6 1/2" rectangle female to 8" round male, Mates a dripless connection between rectangle flex liner and the round opening or vertical pipe on your appliance. Read More

$150.00

6” Rock-Vent Double wall Black stove pipe 48” in length, this pipe has some scratches and dents in the outer shell and the inner stainless sleeve is free of defects.  Compatible with our black stove pipe along with Ventis, Champion, and Nexvent-19   One Available. Non-Returnable.   Read More

$200.00

10” x 48” 316L  stainless steel pipe, the pipes have a few dents on the end and a slight oval shape from shipping damage which can be straightened out. Great for a shop or garage setup. It has a smooth interior wall providing you with optimum draft and flow. Use... Read More

$225.00

Napoleon's 36 in" Westminster Grey Herringbone Decorative brick panels made for use with Napoleon Ascent Series Gas Fireplace.  (3) pc. set- (2) sides 11" x 20 1/2"- (1) rear 16 1/4" x 15 3/4" One Available. Non-Returnable. Read More

$150.00

6 in. Rock-Vent Double Wall Black stove pipe 48 in. length. This pipe has some scratches and dents in the outer shell and also a large dent on the female end. The inner stainless sleeve is free of defects.  The stainless steel inner liner, 1/2" air space, and outer casing... Read More

$150.00

11 in. x 48 in. 304L stainless steel pipe. The pipes have a few dents on the end and can be straightened out. The pipes will work very well in a shop or garage environment. The smooth interior wall provides ample draft and flow. Use for wood and wood pellet-burning appliances. Non-Returnable. Two Available. Read More

$100.00

The 16 in. storm collar has a cosmetic dent on the collar. Install the stainless steel storm collar around the rigid liner right above the support clamp to keep moisture from entering the flue liner or the chimney cavity. Non-Returnable. One Available. Read More

Sold out

$200.00

6 in. Rock-Vent Double wall Black stove pipe 48 in. length. This pipe has some scratches and dents in the outer shell. The inner stainless sleeve is free of defects. One Available. Non-Returnable. Read More

$50.00

Pellet pipe 4 in. diameter and 12 in. long. The pipe has some minor scratches throughout. Fabricated with a 304L stainless steel inner wall with a painted black galvalume outer wall. Use to safely vent pellet stoves that are vented direct through the wall or  vertically passing through combustibles such... Read More

$65.99

This DuraVent Direct Vent pipe is 4 in. inner x 6 5/8 in. outer and the length is 9 in.,  a few paint defects on this Pipe, but in good working condition. DuraVent Direct Vent Pro Chimney Pipe is engineered and approved to vent just about any gas and propane... Read More

$125.00

This custom oval-to-round 5 in. x 12 1/2 in. oval to 6 in. round adaptor is in new condition. It mates a dripless connection between the oval flex liner and the round opening or vertical pipe on your appliance. The quick-connect clamp on the oval end ensures a seal-tight connection... Read More

$28.00

This 6” x 24” Rock-Vent single-wall black stove pipe is on clearance due to the female end being dented to oval. This would be perfect if you need a small section of pipe that you could cut. You could also attempt to ovalize the pipe to fit an older stove... Read More

$60.00

This 8" stove adaptor has the male fitting with some bends and Extra crimps on the fitting. The outside black has some scratches as well. Used to securely connect double wall black stove pipe to an appliance on the top or out the back of the unit. The inner pipe... Read More

$90.00

This 7” x 36” Rock-Vent double wall black stove pipe is on clearance due to imperfections in the finish. There is also a small dent on the female end that can easily be bent back for a good connection. With a little touch-up paint, this can be brought back to... Read More

$125.00

This HY-C Stainless Steel Single Flue Chimney Cap stainless steel painted black is Size 9 x 13 and is missing the Mounting Hardware without the screws. Cap is sold as is and is non returnable. One available. Read More

$400.00

This is a 19" copper chimney pot topper with a copper cone lid. This chimney pot topper is in excellent condition and comes with an extended 5" wide mounting flange and an extended 5" length sleeve. This pot topper is perfect for a large chimney pot with an inside diameter... Read More

$200.00

This 26" x 17.5" Knockdown top mount multi flue cap with basic lid has a screen height of 16" and is powder coated black. It is on clearance due to some scratches to the powder coating. looking at it from the ground on top of a chimney, you will never... Read More

$219.00

This 15" x 15" Bolt on single flue chimney cap with a designer lid is in new condition. Constructed from stainless steel, this chimney cap will fit a flue as small as 13.25" x 13.25" and as large as 15" x 15". The designer lid provides a 2.5" lid overhang... Read More

$25.00

This 7.5” Pulling cone is in new condition and is perfect for pulling a 7.5” flexible chimney liner down a tight chimney. The quick connect clamp easily attaches and detaches from the liner. This is a perfect solution when installing a 7.5” liner in a tight chimney. The eyelet at... Read More

$20.00

This 6.5 in. Vertical liner to appliance connector is in new condition and has never been used. 316L stainless steel construction. is perfect for connecting a 6.5 in. flexible chimney liner to a wood stove insert. The male end of the connector is a 7 in. male pipe end for... Read More

$35.00

This 3 in. x 45 degree flexible chimney liner fixed elbow is in new condition. This would be perfect for connecting a chimney liner to a pellet stove where the liner has to make a sharp angle through a damper and a smoke shelf. This can also be used for... Read More

$200.00

This 41” x 17” Knockdown multi-flue cap with a basic lid, Powder coated black is in new condition and comes along with all the hardware necessary to install the cap. The screen mesh measures 41” length by 17” in width and has a screen height of 10”. If you are... Read More

$38.99

Black Poly Rods with buttonlock ends measure 3 ft. in length and are also compatible with our String Whip Cleaning System. Please add the desired quantity to your shopping cart. Note: Must order (1) 3/8" drill adapter below. Read More