Rock-Vent Class A Chimney Systems

From$121.99

The Rock-Vent Class A Chimney Pipe is the premier wood chimney pipe, constructed with high quality materials and unique features. Moreover, it is backed by a lifetime transferable warranty. Listed to UL103HT and capable of withstanding extremely high temperatures up to 2100 degree F. Rock-Vent Class A has one of... Read More

From$134.99

The Rock-Vent Class A Chimney Pipe is the premier All-Fuel chimney pipe, constructed with high quality materials and unique features. Moreover, our chimney pipe is backed by a lifetime transferable warranty. Listed to UL103HT and capable of withstanding extremely high temperatures up to 2100 degree F. Rock-Vent Class A has... Read More

From$479.99

We offer a package that includes the common items needed to complete a Flat ceiling installation for ease of ordering. Included in the Flat ceiling chimney pipe installation kit is the 11" ceiling support, 0/12 to 6/12 or 7/12 to 12/12 vented roof flashing (galvalume), storm collar, universal male adapter (to... Read More

From$510.99

We offer a package that includes the common items needed to complete a Pitched ceiling installation for ease of ordering. Included in the Pitched ceiling chimney pipe installation kit is the 24" square ceiling support, 0/12 to 6/12 or 7/12 to 12/12 vented roof flashing (galvalume), storm collar, universal male adapter... Read More

From$929.99

We offer a package that includes the common items needed to complete a Through the Wall installation for ease of ordering. Included in the Through the Wall chimney pipe installation kit is the wall pass through, stainless steel tee with clean out cap, galvanized tee support, universal male adapter (to... Read More

From$481.99

Use the Rock-Vent Chimney Pipe Extension Kit to extend your masonry chimney as well as reline the chimney flue. It's not uncommon to find a deteriorated chimney that needs to be extended. Or, you may be installing a new wood stove that requires the chimney height to be taller. Either... Read More

From$499.99

Rock-Vent Class A Chimney Pipe Elbow Kits are available in 15 and 30 degree options. Each elbow kit includes 2 elbows and 1 elbow support. Elbows are used to offset obstructions such as framing joists in your installation. The elbow support is required between two elbows to support the chimney... Read More

From$412.99

The Rock-Vent Insulated Tee and Tee Cap will be located at the base of the chimney in your installation. The Tee can be installed on the interior or the exterior of a structure. The included tee cover is now easier to remove by means of a one nut driver connection;... Read More

From$185.99

This is an optional, but beneficial, way to support your exterior installation. Provides 2" to 5" of adjustment and supports 60' of chimney pipe. Available in galvalume or 304L stainless steel. Measurement Chart: Class A Tee Support 5” 6” 7” 8” A 8” 9” 10” 11” B 11” 12” 13”... Read More

From$151.99

The Standard Chimney Cap for Rock-Vent Class A chimney systems is a 430 stainless steel cap that you can be proud of. Easily installs with a quick connect clamp and provides easy access to clean or inspect the chimney. Powder Coating Available, please call for quote - Read More About... Read More

From$128.99

The Wood Style Chimney Cap for Rock-Vent Class A chimney systems is a 430 stainless steel cap that you can be proud of. The Wood Style chimney cap has more open screening than the Standard chimney cap. A good choice to provide some pest protection but with less creosote buildup.... Read More

From$122.99

The Wide Open Style Chimney Cap for Rock-Vent Class A chimney systems is a 430 stainless steel cap that you can be proud of. For solid fuel installations with creosote clogging issues, this is the ideal wide open cap. Easily installs with a quick connect clamp and provides easy access... Read More

From$41.99

The Spark Arrestor Screen can be installed in most Rock-Vent Class A Chimney Caps. A great safety assurance to add to the Standard, Wood Style, and Wide Open Style chimney caps. It will not fit in the Wind Directional chimney cap. Read More

From$179.99

We offer our Rock-Vent Vented Class A Flashing in a variety of pitches and in two different materials. Choose between Galvalume or 304L Stainless Steel. Both are constructed of high quality and corrosive resistant materials. The Galvalume Flashing includes an aluminum storm collar and the 304L Flashing includes a stainless... Read More

From$257.99

The Rock-Vent Non-Vented Metal Roof Flashing is a one of a kind design that solves the challenges of metal roof flashings. Available in galvalume and 304L stainless steel and in a variety of pitches. Choose the 304L Stainless Steel Flashing for ultimate longevity. Storm collar is included. Powder Coating Available,... Read More

From$309.99

Rock-Vent Vented Peak Flashing is used when coming through the peak of the roof. Available in 304L stainless steel and galvalume. Choose the 304L Stainless Steel Flashing for ultimate longevity. Please choose the diameter you would like and enter your desired pitch in the text box - REFER TO SIZING... Read More

From$308.99

The Snow Wedge is especially important for snow diversion on metal roofs. Available in low, medium, or steep pitches to accommodate a variety of roof slopes. Manufactured with 24 gauge 304L stainless steel. When installing, trace the metal roof profile on the front edge of the Flashing and cut for... Read More

From$84.99

The Rock-Vent Storm Collar is made to fit the exact dimension of the pipe. Constructed of 304L stainless steel. Use to seal the inner edge that contacts the chimney pipe with silicone sealant. A storm collar is always included with our Flashings or Attic Insulation Shields (may be made of... Read More

$112.99

The Rock-Vent Class A Roof Support is designed to provide support for the chimney pipe at the roof line. Easily adjusts to any roof pitch and fits Rock-Vent pipe diameters of 5" to 8". Constructed with a stainless steel band with galvanized mounting brackets. Use the Roof Support to extend... Read More

$179.99

The Rock-Vent Telescoping Roof Braces adjust from 67" to 114" and fits pipe diameters of 5", 6", 7" and 8". Constructed of galvanized with a stainless steel band and galvanized telescoping poles. Use the Telescoping Roof Brace to brace the chimney pipe when it extends more than 5' above the... Read More

From$327.99

The Square Ceiling Support is used on flat, cathedral, or sloped ceilings. The bottom of the ceiling support must extend a minimum of 3 inches into the room. A Universal Adapter is included to connect Rock-Vent Class A to either single or double wall stove pipe. Supports up to 60'... Read More

From$127.99

Use the Flat or Pitched Ceiling Trim Collar on flat or sloped ceilings whether you install (1) a Round Ceiling Support, (2) use a 36" Finishing cover over Class A pipe on a roof supported installation, or (3) have exposed Class A chimney pipe on a roof supported installation. We... Read More

From$127.99

Use the Attic Insulation Shield when a chimney passes through an unoccupied attic to keep insulation or any other combustible materials from contacting the chimney pipe. Galvanized with bottom flanges that ensure a proper fit into the framed opening. Storm Collar included. Attic Insulation Shielding Overview: Do you need the... Read More

From$112.99

The Firestop Radiation Shield is galvanized with top flanges that ensure a proper fit into the framed opening. The adjustable upper section extends from 11" to 19" to completely cover the framing. Designed to protect combustible framing as the chimney pipe passes through a floor and/or ceiling. The Firestop is... Read More

From$283.99

The Wall Pass-Thru Non-Insulated Thimble is used when a Class A chimney passes horizontally thru a combustible wall. Adjustable from 4" to 8". A universal adapter is included to seamlessly transition the Rock-Vent Class A chimney pipe to either single or double wall stove pipe. The Universal Adapter has a... Read More

From$329.99

The Transition Plate allows you to connect our Rock-Vent Class A to our Rock-Flex Chimney Liner or Rigid Chimney Liner in a masonry chimney restoration. The plate measures 18" x 18". An example installation when this plate is used is when a deteriorating masonry chimney is torn down to the... Read More

From$102.99

Use the Anchor Plate to attach Rock-Vent Class A to a masonry fireplace OR metal-cased/factory built fireplace and to certain types of heaters. Plate is fabricated with 24 gauge steel. For zero clearance fireplaces, seal the Anchor Plate to the flue outlet of a zero clearance fireplace with high-temperature adhesive/sealant... Read More

From$87.99

Unsurpassed in the chimney industry! When the Standard Wall Support is used on Wall Pass-Thru installations, the Wall Support provides both vertical load bearing and lateral support. The first Wall Support is fastened to the first chimney length as a base support and then, at a minimum of every 8... Read More

From$187.99

The Extended Wall Support is just what you need to avoid the hassle of cutting through or offsetting an eave. It provides 9" to 14" of adjustment off of the vertical structure. Provides both vertical and lateral support when installed every eight feet. Install the Wall Support no more than... Read More

From$121.99

Use the Wall Stand-Off in conjunction with the Tee Support to stabilize the chimney. It is not made to provide vertical, weight-bearing support. The Tee Support will provide all the vertical, weight-bearing support that you need. Install every 8' to provide lateral support and will adjust 2" to 6" from... Read More

From$79.99

Use the Universal Adapter to adapt from Class A to single or double wall black connector pipe. Constructed of 316L stainless steel and painted black for a seamless transition. Needed for all Wall Pass-Thru and Ceiling Supported installations. Measurement Chart: Universal Male/Female Adapter 5” 6” 7” 8” A 5” 6”... Read More

From$351.99

The chimney pipe Telescoping Section allows you to have the perfect length of chimney when and wherever you need it. It's an adjustable length that extends from 14" to 22" and its smooth weld technology allows the two sections of the pipe to slide together effortlessly! Innovative technology makes sure... Read More

$113.99

Use the Support Box Truss Spanner to eliminate the need to frame the Support Box on all sides. Adjusts from 16" - 24" on center and fits pipe diameters of 5", 6", 7", and 8". Measurement Chart: Rock-Vent Truss Spanner A 17.267” B 25.167” C 2” *Due to many variables... Read More

From$50.99

If you are installing Rock-Vent Class A Chimney Pipe under a stone slate or a custom shroud, then you will need this pipe end cap. You will also may need the End Cap if you are installing an after-market rain cap, such as the Vacu-Stack or WeatherShield chimney caps. The... Read More