Fireplace Mantel Required Clearances

Fireplace Mantel Required Clearances

"The stockings were hung on the chimney with care..."

While we may have grown up listening to this Christmas song, the idea of hanging combustible stockings above the fireplace may not have been the greatest suggestion. There are National Fire Codes that require all flammable materials to be at least 6" from the fireplace opening, and depending on the overhang and material of the mantel, that distance could be more.

These codes state that for every 1/8 inch of protruding combustible material, you must add an additional inch of clearance. All operational fireplaces are to be constructed in accordance with safety regulations that position flammable material, such as a wood mantel, far enough away from the flames and heat so that it does not ignite.

The building codes will typically determine the height to place the mantel from the hearth, and the distance from the firebox. As a general rule, the mantel is placed about 12 inches above the fireplace opening. Then adding an inch to the distance for every inch that the mantel protrudes. So a mantel 6 inches deep, would be attached 18 inches above the firebox opening.

Installing a fireplace mantle without adequate clearance from the fireplace opening could be a serious fire hazard and it may lead to damage and injury.

Most fireplaces radiate heat out of the front of the firebox, because of this, your mantel needs to be placed a safe distance away from the firebox.

A non-combustible material such as marble, stone, or tile is also required to be installed between the fireplace opening and your mantel.

Use a mantel heat shield when you have small clearances between the top of your fireplace and the bottom of your mantel. A mantel heat shield will prevent your mantel from becoming too warm. It will also prevent any discoloration to your mantel due to heat.

If you have a fireplace insert, or are looking to install one to improve the efficiency of your home heating, the manufacturer clearly dictates mantel clearances in their installation instructions.

DIY Center

(AKA ‘The Rockford Files’)

From video tutorials to product walkthroughs, we have a variety of DIY resources just for you! Click the button below to view our entire library.


Need Help?

We are here to answer all of your questions




Our 316Ti flexible chimney liner and chimney liner components have passed the rigorous testing at the Underwriters Laboratories with best in class status and are UL Listed. So if you are looking for UL listed chimney liner sold directly to homeowners, then look no further than Rockford Chimney

Customer Testimonials

Back in July you gave me excellent advice re. sizing/purchasing a flue liner for the chimney associated with my wood stove. I'd like to thank you once agai... More

—AE Northfield, MN

A few weeks ago I ordered a chimney liner system for my fireplace insert. Your salesman recommended the liner system plus the insulating blanket. I just wa... More

—AH Happy customer

Just got around to installing my new smooth flexible liner and deluxe terra cotta cap (wow). The quality of your product is second to none. Very pleased an... More

—B.B. from Massachusetts

Thanks so much for the great tech service from Dennis, very knowledgable, friendly and proffessional.Your website is the best, beats your competition by fa... More

—Bill in Knoxville

Sue and Dennis, I received the final part of my order yesterday (the chimney cap that actually fits over the chimney chase). It looks wonderfu... More


Hello, I was shopping for an fireplace insert and called RCS to ask why they were so much cheaper than my local guy, the reply was " we sell thousand of th... More

—Chris, PA.