- 6" x 13" x 18" Terra-Cotta Top Plate For Flex Liner - Clearance$35.00
This 6" x 13" x 18" Terra-Cotta top plate is on clearance due to a manufacture defect and does not meet our high standard for our parts.
- Stainless Steel Liners (Flexible and Smooth Wall) - Clearance ItemAs low as $36.00
Flexible Round and Smooth Wall chimney liners on clearance. Use your new flexible chimney liner with Wood, Pellet, Gas, Oil, and Coal burning appliances.
- Flex Liner Terra-Cotta Top Plate with Missing Drip Edge - ClearanceAs low as $55.00
These terra-cotta top plates are on clearance because of a manufacturing error. These top plates are fully functional, however, they are missing a drip edge on one side skirt.
- Flex Liner Terra-Cotta Top Plate w/ Missing Bolt & Nut - ClearanceAs low as $52.00
These terra-cotta top plates are on clearance because one of the locking nuts was missed during fabrication. There are still pressure bolts on all for sides and is sure to have a sung fit on your terra-cotta flue.
- 13.375" x 5.875" Oval Male to 8" Round Female for Flex Liner$89.00
This adapter will connect a wood stove insert with a 13.375" x 5.875" oval exhaust hole to an 8" round flexible chimney liner. Circumference of 33.25".
- 6.5" x 45 Degree Flex Liner Elbow - Clearance$32.00
This 6.5" x 45 degree elbow has a female end to accept 6.5" flexible liner and a reduced crimped male end. The male end measures 6.625". This elbow will provide a 45 degree angle when connecting a flexible liner to a wood stove insert.
- 6.5" Flex Liner Vertical Liner To Appliance Connection - Clearance$18.00
This 6.5" vertical liner to appliance connection has a female end to accept a 6.5" flexible chimney liner and has a reduced crimped male end. The male end measures 6.625". One available.
- 5" x 24" AL29-4C Flexible Liner Extender - Clearance$25.00
This 5" x 24" AL29-4C flexible liner extender is to be used to connect a flexible liner to a high efficiency gas appliance.
- 7" Flex Liner Tee Connection w/10" Snout & Tee Cap - Clearance$60.00
This 7" flex liner two part tee is on clearance because it has a few scratches and was not fabricated to meet our high standards for our parts. This Tee Connection is fully functional and will install without issue.
- 6" x 9" x 13" Flat Top Plate - Clearance$29.00
This top plate is for a 6" diameter flexible liner and features a plate size that measures 9" x 13". No clamps, flashing, or storm collars needed. Just pull our flexible stainless steel liner through the collar and tighten the quick connector band.