Removing a Fireplace Damper for Chimney Liner Installation

Removing a Fireplace Damper for Chimney Liner Installation

Removing a fireplace damper is a common part of a chimney renovation that homeowners come across. Often times there isn't enough room to pass your stainless steel chimney liner through the damper opening, so you may need to remove the fireplace damper or at least a portion of it, when connecting a wood stove or insert. The damper is commonly referred to as the flue, however it is actually the access point to the flue. Understanding the different components of the damper will help explain how to remove it.

Damper Components

A fireplace throat damper is comprised of two main components: the Frame and Flapper. The damper frame is fabricated from heavy cast iron or steel and has an opening that allows the smoke to travel up through the chimney. The opening in the frame is typically 3" to 8" wide and 24" to 36" long. The frame is mortared in place just below the smoke shelf. The other main component is the Flapper. The Flapper allows you to control the draft, by letting more or less air to flow through the chimney flue. This operation is regulated by the use of a handle or chain pulley.

Removing the Damper Components

Every damper has a pivot point where the chain or handle will allow the damper to open or close. Locate the pivot point and see if the damper flapper can be lifted out of the guides. If you are unable to lift the flapper out of the guides, you will need to cut them out using a grinder with cut off wheel. The handle that is connected to the flapper is usually bolted to the top of the firebox, right behind the lentil. The lintel is a heavy piece of angle iron that holds up the brick over the center of the fireplace and is embedded into the brick, located just above the opening in the firebox. Usually the bolts are rusted and seized, so you may have to use a grinder wheel to cut them off.

The frame of the damper is a bit more difficult to remove. The frame is usually much thicker that the flapper. You can go about removing the frame in several ways. You could either remove the frame by cutting out the metal, or loosening the mortar around the bricks around the frame. If your frame is cast iron, using a hammer will sometimes shatter the frame. Using an angle grinder and cutoff wheel or sawzall is another option, it is a good idea to have an extra supply of wheels or blades. Those of you that are skilled and confident enough to use a cutting torch, may wish to use it. You could also use a chisel and hammer to loosen the frame around the brick.

When removing a throat damper please make sure to have all the appropriate safety equipment. Eye protection, gloves, fire extinguisher and a good size cover to help keep everything clean and protected. Removing the damper can be a dirty job, however the dirty jobs are the ones that can save you hundreds even thousands of dollars.


Completed Installation!

Here's an example of a customer's complete installation!

DIY Center

(AKA ‘The Rockford Files’)

From video tutorials to product walkthroughs, we have a variety of DIY resources just for you! Click the button below to view our entire library.


Need Help?

We are here to answer all of your questions




Our 316Ti flexible chimney liner and chimney liner components have passed the rigorous testing at the Underwriters Laboratories with best in class status and are UL Listed. So if you are looking for UL listed chimney liner sold directly to homeowners, then look no further than Rockford Chimney

Customer Testimonials

Back in July you gave me excellent advice re. sizing/purchasing a flue liner for the chimney associated with my wood stove. I'd like to thank you once agai... More

—AE Northfield, MN

A few weeks ago I ordered a chimney liner system for my fireplace insert. Your salesman recommended the liner system plus the insulating blanket. I just wa... More

—AH Happy customer

Just got around to installing my new smooth flexible liner and deluxe terra cotta cap (wow). The quality of your product is second to none. Very pleased an... More

—B.B. from Massachusetts

Thanks so much for the great tech service from Dennis, very knowledgable, friendly and proffessional.Your website is the best, beats your competition by fa... More

—Bill in Knoxville

Sue and Dennis, I received the final part of my order yesterday (the chimney cap that actually fits over the chimney chase). It looks wonderfu... More


Hello, I was shopping for an fireplace insert and called RCS to ask why they were so much cheaper than my local guy, the reply was " we sell thousand of th... More

—Chris, PA.