Selkirk SuperPro & SuperVent Class A Chimney Pipe

From$133.68

Selkirk SuperPro / SuperVent Class A Chimney Pipe is great for venting residential heating appliances that burn wood, #2 oil, natural or LP gas. When a masonry chimney is not an option, the double walled insulated chimney pipe is available to safely pass through a wall or ceiling and roof... Read More

From$102.16

The SuperPro / SuperVent Adapter Anchor Plate is used to connect masonry fireplaces and specific factory built fireplaces to SuperPro / SuperVent Class A Chimney Pipe. The Adapter Anchor Plate is used as the starter plate mounted directly to the top of the firebox allowing the first section of chimney... Read More

From$162.74

The SuperPro / SuperVent Adjustable Flashing with Storm Collar is used to waterproof the chimney pipe when it is passing through a roof. The Adjustable Flashing is used for shingle roofs and is available in either 0/12 through 6/12 or 7/12 through 12/12 roof pitches. The Flashing will tuck underneath the shingles... Read More

From$182.38

The SuperPro / SuperVent Wall Thimble is used to provide safe passage of the chimney pipe as it passes through a wall. The Wall Thimble can accommodate a wall thickness from 4.5 in. to 8.75 in. The black interior firestop will provide a finished look for the wall penetration and... Read More

From$68.06

The SuperPro / SuperVent Wall Band is used to stabilize the pipe on the side of the home for through the wall chimney systems and also inside a chase for a zero clearance fireplace installation. The Wall Band mounts directly to the wall and provides the necessary 2 in. clearance... Read More

From$133.80

The SuperPro / SuperVent Stove Pipe to Chimney Adapter is used to make the connection from SuperPro / SuperVent Stove Pipe to either single wall or double wall black stove pipe. The Chimney Adapter twists into the bottom of the chimney pipe and reduces to a male single wall stove... Read More

From$38.94

The SuperPro / SuperVent Storm Collar is used to seal the gap between where the chimney pipe comes through the roof flashing when passing through the roof. The Storm Collar wraps around the SuperPro / SuperVent pipe tightly and sits over the cone of the roof flashing. A bead of silicone will need... Read More

From$46.22

The SuperPro / SuperVent Spark Arrestor Mesh is used to prevent large sparks from exiting the chimney pipe as a further safety precaution to prevent fires. The 1/2 in. stainless steel mesh is easily installed around the SuperPro / SuperVent Rain Cap. Note: The Spark Arrestor Mesh is required for... Read More

From$133.80

The SuperPro / SuperVent Roof Support can be used to support the weight of the chimney pipe at a floor or ceiling and is able to adjust to any roof pitch. It is capable of supporting up to 50 vertical chimney pipes and is also a great choice to support the... Read More

From$187.20

The SuperPro / SuperVent Rain Cap provides the chimney pipe with protection from the elements preventing rain and snow from entering the chimney pipe. The twist lock connection easily attaches and removes for cleanings and inspections. The stainless steel construction is sure to last for many years. An optional 1/2... Read More

$194.40

The SuperPro / SuperVent Roof Brace Kit is used to provide extra stability of the chimney pipe above the roof line. The Roof Brace Kit is required when there is 5 feet or more of chimney pipe extending above the roof. It should also be installed for every 5 feet... Read More

From$48.64

The SuperPro / SuperVent Rafter Radiation Shield must be installed where the chimney is enclosed immediately below the roof line. An example of this is when the attic space of a house is being used as living space (ie. bedroom, guestroom etc.). It must also be installed when height restrictions... Read More

From$17.58

The SuperPro / SuperVent Locking Bands are used to add stability for the chimney pipe connections. The Locking Bands are required for any elbow offset connection, the horizontal pipe connection to the tee snout and for any pipe joint that is extended below the Cathedral Ceiling Support Box. Locking Bands... Read More

From$145.90

SuperPro / SuperVent Firestop Joist Shield is used to safely pass the SuperPro / SuperVent chimney pipe through an additional level of the home above the initial ceiling support. The Firestop Joist Shield mounts between the ceiling joist with the plate side pointing down. The Firestop provides the 2 in.... Read More

From$46.22

The SuperPro / SuperVent Finishing Plate is used to provide a finished look when the Class A chimney pipe is passing through a soffit or flat ceiling when a ceiling support box is not being used. It provides the mandatory 2 in. clearance from combustible material. Constructed from galvanized steel.... Read More

From$183.58

SuperPro / SuperVent Decorator Flat Ceiling Support is used to support the weight of the vertical chimney stack when passing through a flat ceiling. Simply frame around the decorator cap between the ceiling joist and use the included trim collar for a finished look. The SuperPro / SuperVent Stove Pipe... Read More

From$191.96

The SuperPro / SuperVent Tee Support is used to support the weight of the SuperPro / SuperVent Tee and the vertical chimney stack. The Tee Support can support up to 38 feet of vertical chimney pipe. When mounted to the side of a structure it will provide the necessary 2 in. clearance from... Read More

From$488.72

The SuperPro / SuperVent Tee and Tee Cap is used for horizontal venting application when the pipe needs to pass through the wall and run up the side of the home. The Tee connection is what turns the pipe from horizontal to vertical. The Tee will need to be mounted... Read More

From$661.48

The SuperPro / SuperVent Elbow Kit is used to offset the Class A pipe when obstructions such as a roof and ceiling joist are in the direct path of the vent. For vertical venting through the ceiling and the roof, it is common for the penetration of the ceiling to... Read More

From$191.96

The SuperPro / SuperVent Pitched/Cathedral Ceiling Support Box is used to support the chimney pipe as it passes through a cathedral ceiling. The Pitched/Cathedral Ceiling Support Box comes with a 17 in. long support box which is framed in between the rafters, a support band, and a 4 in. trim... Read More

From$218.84

The SuperPro / SuperVent Attic Insulation Shield is used to prevent any insulation or debris in an attic from coming in contact with the chimney pipe that is passing through a ceiling into an attic while maintaining the necessary 2 in. clearance from combustible material. The Attic Insulation Shield is... Read More