DuraVent PelletVent Pro Standard Roof Flashing

Product Images

DuraVent PelletVent Pro Standard Roof Flashing

DuraVent PelletVent Pro Standard Roof Flashing

Description:
Use to waterproof around the PelletVent Pro pipe as it passes through a shingle roof. Offered in either 0/12 thru...

Use to waterproof around the PelletVent Pro pipe as it passes through a shingle roof. Offered in either 0/12 thru 6/12 or 7/12 thru 12/12 roof pitch. Galvalume construction is extremely corrosive resistant.

As low as$47.14

Product Details

Help & Documents

The DuraVent PelletVent Pro Standard Roof Flashing is used to waterproof around the PelletVent Pro pipe as it passes through a shingle roof. The top side of the flashing will tuck under the shingles and the bottom half of the flashing will overhang the shingles creating a waterproof roof penetration.

The Flashing is adjustable and offered in either 0/12 thru 6/12 or 7/12 thru 12/12 roof pitch. The galvalume construction is extremely corrosive resistant. A storm collar is required to seal around the top of the flashing around the pipe to make the entire system water tight.

Note: The DuraVent PelletVent Pro Standard Roof Flashing can only be installed on a shingle roof. For metal, slate, or terra-cotta tile roofs you must use the DuraVent PelletVent Pro Metal Roof Flashing.

Measurement Chart:

DuraVent PelletVent Pro Standard Roof Flashing
Size
A 3 3/4" 4 3/4" 3 3/4" 4 3/4"

Product Details:

The DuraVent PelletVent Pro Standard Roof Flashing is used to waterproof around the PelletVent Pro pipe as it passes through a shingle roof. The top side of the flashing will tuck under the shingles and the bottom half of the flashing will overhang the shingles creating a waterproof roof penetration.

The Flashing is adjustable and offered in either 0/12 thru 6/12 or 7/12 thru 12/12 roof pitch. The galvalume construction is extremely corrosive resistant. A storm collar is required to seal around the top of the flashing around the pipe to make the entire system water tight.

Note: The DuraVent PelletVent Pro Standard Roof Flashing can only be installed on a shingle roof. For metal, slate, or terra-cotta tile roofs you must use the DuraVent PelletVent Pro Metal Roof Flashing.

Measurement Chart:

DuraVent PelletVent Pro Standard Roof Flashing
Size
A 3 3/4" 4 3/4" 3 3/4" 4 3/4"

DIY Center

(AKA ‘The Rockford Files’)

From video tutorials to product walkthroughs, we have a variety of DIY resources just for you! Click the button below to view our entire library.

START LEARNING

Need Help?

We are here to answer all of your questions

1-866-708-2446

OR

CONTACT US

Our 316Ti flexible chimney liner and chimney liner components have passed the rigorous testing at the Underwriters Laboratories with best in class status and are UL Listed. So if you are looking for UL listed chimney liner sold directly to homeowners, then look no further than Rockford Chimney