Rock-Vent Transition Plate

Product Images

Rock-Vent Transition Plate

Rock-Vent Transition Plate

Rock-Vent Transition Plate

Rock-Vent Transition Plate

Description:
The Transition Plate allows you to connect our Rock-Vent Class A to our Rock-Flex Chimney Liner or Rigid Chimney Liner...

The Transition Plate allows you to connect our Rock-Vent Class A to our Rock-Flex Chimney Liner or Rigid Chimney Liner in a masonry chimney restoration.

As low as$313.99

Product Details

Specifications

Help & Documents


The Transition Plate allows you to connect our Rock-Vent Class A to our Rock-Flex Chimney Liner or Rigid Chimney Liner in a masonry chimney restoration. The plate measures 18" x 18".

An example installation when this plate is used is when a deteriorating masonry chimney is torn down to the attic. A liner, such as Rock-Flex, would be installed from the heating appliance to the Transition Anchor Plate, which is mounted to the top of the masonry chimney. Rock-Vent Class A chimney pipe would be installed on top of the Transition Plate upward to the required height.

Measurement Chart:

Rock-Vent Transition Plate


5” 6” 7” 8”
A 5” 6” 7” 8”
B 7.5” 8.5” 9.5” 10.5”
C 2” 2” 2” 2”
D 1.7” 1.7” 1.7” 1.7”

*Due to many variables beyond our control, the installer should check actual parts for final dimensions.

Optional Accessory Details

The Stainless Steel Flexible Chimney Liner is used with the Transition Plate to reline the chimney flue. The diameter of the liner should match the diameter of the Transition Plate you are ordering. The length of the flexible chimney liner will be dependent on how tall the existing chimney is.

The Flex Liner Tee Connector is used to terminate the flexible chimney liner at the bottom of the chimney where the chimney thimble is located. The Tee Connector includes a 10" long snout that will pass through the chimney thimble and will connect to your stove pipe. Longer length tee snouts are available on our Flex Liner Components page. Watch the Tee Connector Installation Video here at this link.

Installation Instructions:

Rock-Vent Class A Installation Instructions

The Transition Plate will need to be sealed with silicone or mortared into place. To further secure the Transition Plate in place, use masonry anchors on each of the four corners. In order to do this, you will need to remove any clay tile that is protruding above the chimney. Please see the installation manual for full instructions.

The mounting plate cannot touch any combustible material. Make sure that the transition plate has at least 1" clearance from the mounting plate to any combustible material. Additionally, the masonry chimney must be a minimum of 10" above the insulation or any combustible material in an attic space.

Product Details:


The Transition Plate allows you to connect our Rock-Vent Class A to our Rock-Flex Chimney Liner or Rigid Chimney Liner in a masonry chimney restoration. The plate measures 18" x 18".

An example installation when this plate is used is when a deteriorating masonry chimney is torn down to the attic. A liner, such as Rock-Flex, would be installed from the heating appliance to the Transition Anchor Plate, which is mounted to the top of the masonry chimney. Rock-Vent Class A chimney pipe would be installed on top of the Transition Plate upward to the required height.

Measurement Chart:

Rock-Vent Transition Plate


5” 6” 7” 8”
A 5” 6” 7” 8”
B 7.5” 8.5” 9.5” 10.5”
C 2” 2” 2” 2”
D 1.7” 1.7” 1.7” 1.7”

*Due to many variables beyond our control, the installer should check actual parts for final dimensions.

Specifications:

Optional Accessory Details

The Stainless Steel Flexible Chimney Liner is used with the Transition Plate to reline the chimney flue. The diameter of the liner should match the diameter of the Transition Plate you are ordering. The length of the flexible chimney liner will be dependent on how tall the existing chimney is.

The Flex Liner Tee Connector is used to terminate the flexible chimney liner at the bottom of the chimney where the chimney thimble is located. The Tee Connector includes a 10" long snout that will pass through the chimney thimble and will connect to your stove pipe. Longer length tee snouts are available on our Flex Liner Components page. Watch the Tee Connector Installation Video here at this link.

Help & Documents:

Installation Instructions:

Rock-Vent Class A Installation Instructions

The Transition Plate will need to be sealed with silicone or mortared into place. To further secure the Transition Plate in place, use masonry anchors on each of the four corners. In order to do this, you will need to remove any clay tile that is protruding above the chimney. Please see the installation manual for full instructions.

The mounting plate cannot touch any combustible material. Make sure that the transition plate has at least 1" clearance from the mounting plate to any combustible material. Additionally, the masonry chimney must be a minimum of 10" above the insulation or any combustible material in an attic space.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael Rigby

Customer Service is top

DIY Center

(AKA ‘The Rockford Files’)

From video tutorials to product walkthroughs, we have a variety of DIY resources just for you! Click the button below to view our entire library.

START LEARNING

Need Help?

We are here to answer all of your questions

1-866-708-2446

OR

CONTACT US

Our 316Ti flexible chimney liner and chimney liner components have passed the rigorous testing at the Underwriters Laboratories with best in class status and are UL Listed. So if you are looking for UL listed chimney liner sold directly to homeowners, then look no further than Rockford Chimney

Customer Testimonials

Back in July you gave me excellent advice re. sizing/purchasing a flue liner for the chimney associated with my wood stove. I'd like to thank you once agai... More

—AE Northfield, MN

A few weeks ago I ordered a chimney liner system for my fireplace insert. Your salesman recommended the liner system plus the insulating blanket. I just wa... More

—AH Happy customer

Just got around to installing my new smooth flexible liner and deluxe terra cotta cap (wow). The quality of your product is second to none. Very pleased an... More

—B.B. from Massachusetts

Thanks so much for the great tech service from Dennis, very knowledgable, friendly and proffessional.Your website is the best, beats your competition by fa... More

—Bill in Knoxville

Sue and Dennis, I received the final part of my order yesterday (the chimney cap that actually fits over the chimney chase). It looks wonderfu... More

—CC, VA

Hello, I was shopping for an fireplace insert and called RCS to ask why they were so much cheaper than my local guy, the reply was " we sell thousand of th... More

—Chris, PA.