Sealtight Chimney Damper

Product Images

Sealtight Chimney Damper

Sealtight Chimney Damper

Sealtight Chimney Damper

Sealtight Chimney Damper

Sealtight Chimney Damper

Sealtight Chimney Damper

Sealtight Chimney Damper

Sealtight Chimney Damper

Sealtight Chimney Damper

Sealtight Chimney Damper

Description:
This is a great option if you don't want a cap visible on your chimney. It provides a tight gasketed...

This is a great option if you don't want a cap visible on your chimney. It provides a tight gasketed fit to seal out weather, insects, birds and animals while keeping heat in. Or, if you prefer a cap, it can also be installed beneath a HY‑C chimney cap.

As low as$270.99

Product Details

Help & Documents

The Sealtight Chimney Damper is an easy and affordable solution to replace a traditional masonry fireplace throat damper while saving on your energy cost. Old fireplace throat dampers warp over time and do not make a good seal, causing cold air to come into the home in the winter and allowing the cool air condition in the summer to go right up the chimney. The Sealtight damper is equipped with a gasket seal that creates an airtight seal at the top of your chimney preventing any cold air from coming down the flue into your home. Sealtight dampers will also keep insects and critters from entering the chimney.

The Sealtight Chimney Damper easily mounts to the top of the masonry chimney flue. A stainless steel cable with a spring chain handle is lowered down the flue connected to the damper to allow you to open and close the damper from inside the firebox. A bracket is mounted to the inside wall of the fireplace and the chain handle will be locked in the bracket when you want the damper to be closed. Simply release the chain handle from the bracket when you are ready to open the damper to have a fire. The Sealtight damper comes with a 30 ft. cut to fit cable, fireplace bracket, cool-touch spring handle, mounting adhesive and hardware. The only tools you will need are a set of wire cutters, a drill, 1/4" masonry drill bit and a hammer.

The Sealtight Chimney Damper is a low profile damper that will not extend very high above the top of the chimney when the damper is open. The low profile design is especially desirable for historic homes when you would not want to see the damper on top of the chimney flue. The Sealtight Chimney Damper is also a great choice if you currently have a multi flue chimney cap or a stone/slate chimney cap that does not extend very high above the top of the chimney. The low profile design should fit nicely under any type of multi flue or slate chimney caps. Since the Sealtight chimney damper opens inside the chimney flue, it will not provide any rain protection for the flue when the damper is open. You can mount an HY‑C chimney cap over the Sealtight damper to provide rain protection and add a spark arrestor for the chimney flue while the damper is open.

Note: Intended for use with traditional masonry wood burning fireplaces. Do not use Sealtight dampers with gas logs. Failure to open the damper could result in Carbon Monoxide to back up in the home or in the event of a gas leak could result in gas being trapped in the chimney which could result in an explosion.

Sizing:

Size Fits Flue Size
8" x 8" 6 3/4" to 9" Width x 6 3/4" to 9" Length
8" x 17" 6 1/4" to 8 3/4" Width x 14 1/2" to 16 3/4" Length
9" x 13" 6 1/2" to 10" Width x 9" to 12 3/4" Length
12" x 16" 9 1/4" to 11 3/4" Width x 13" to 15" Length
13" x 13" 10 1/8" to 12 3/4" Width x 10 1/8" to 12 3/4" Length
13" x 18" 9 5/8" to 12 3/4" Width x 15" to 17 1/2" Length
18" x 18" 15" to 17 3/4" Width x 15" to 17 3/4" Length

    Installation Instructions

    Installation Instructions for Sealtight Chimney Damper

    Installation Tools Needed

    • Wire Cutters
    • Drill with 1/4" Masonry Drill Bit
    • Hammer

    Parts Included:

    • 30 ft. cut to fit cable
    • Fireplace Bracket
    • Cool-touch Spring Handle
    • Mounting Adhesive
    • Hardware

    Product Details:

    The Sealtight Chimney Damper is an easy and affordable solution to replace a traditional masonry fireplace throat damper while saving on your energy cost. Old fireplace throat dampers warp over time and do not make a good seal, causing cold air to come into the home in the winter and allowing the cool air condition in the summer to go right up the chimney. The Sealtight damper is equipped with a gasket seal that creates an airtight seal at the top of your chimney preventing any cold air from coming down the flue into your home. Sealtight dampers will also keep insects and critters from entering the chimney.

    The Sealtight Chimney Damper easily mounts to the top of the masonry chimney flue. A stainless steel cable with a spring chain handle is lowered down the flue connected to the damper to allow you to open and close the damper from inside the firebox. A bracket is mounted to the inside wall of the fireplace and the chain handle will be locked in the bracket when you want the damper to be closed. Simply release the chain handle from the bracket when you are ready to open the damper to have a fire. The Sealtight damper comes with a 30 ft. cut to fit cable, fireplace bracket, cool-touch spring handle, mounting adhesive and hardware. The only tools you will need are a set of wire cutters, a drill, 1/4" masonry drill bit and a hammer.

    The Sealtight Chimney Damper is a low profile damper that will not extend very high above the top of the chimney when the damper is open. The low profile design is especially desirable for historic homes when you would not want to see the damper on top of the chimney flue. The Sealtight Chimney Damper is also a great choice if you currently have a multi flue chimney cap or a stone/slate chimney cap that does not extend very high above the top of the chimney. The low profile design should fit nicely under any type of multi flue or slate chimney caps. Since the Sealtight chimney damper opens inside the chimney flue, it will not provide any rain protection for the flue when the damper is open. You can mount an HY‑C chimney cap over the Sealtight damper to provide rain protection and add a spark arrestor for the chimney flue while the damper is open.

    Note: Intended for use with traditional masonry wood burning fireplaces. Do not use Sealtight dampers with gas logs. Failure to open the damper could result in Carbon Monoxide to back up in the home or in the event of a gas leak could result in gas being trapped in the chimney which could result in an explosion.

    Sizing:

    Size Fits Flue Size
    8" x 8" 6 3/4" to 9" Width x 6 3/4" to 9" Length
    8" x 17" 6 1/4" to 8 3/4" Width x 14 1/2" to 16 3/4" Length
    9" x 13" 6 1/2" to 10" Width x 9" to 12 3/4" Length
    12" x 16" 9 1/4" to 11 3/4" Width x 13" to 15" Length
    13" x 13" 10 1/8" to 12 3/4" Width x 10 1/8" to 12 3/4" Length
    13" x 18" 9 5/8" to 12 3/4" Width x 15" to 17 1/2" Length
    18" x 18" 15" to 17 3/4" Width x 15" to 17 3/4" Length

      Help & Documents:

      Installation Instructions

      Installation Instructions for Sealtight Chimney Damper

      Installation Tools Needed

      • Wire Cutters
      • Drill with 1/4" Masonry Drill Bit
      • Hammer

      Parts Included:

      • 30 ft. cut to fit cable
      • Fireplace Bracket
      • Cool-touch Spring Handle
      • Mounting Adhesive
      • Hardware

      Customer Reviews

      Based on 1 review
      100%
      (1)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      R
      Rick C
      Well Made Product

      I have not installed this damper as yet but it looks to be very high quality and should perform well. Fast delivery to Canada.

      DIY Center

      (AKA ‘The Rockford Files’)

      From video tutorials to product walkthroughs, we have a variety of DIY resources just for you! Click the button below to view our entire library.

      START LEARNING

      Need Help?

      We are here to answer all of your questions

      1-866-708-2446

      OR

      CONTACT US

      Our 316Ti flexible chimney liner and chimney liner components have passed the rigorous testing at the Underwriters Laboratories with best in class status and are UL Listed. So if you are looking for UL listed chimney liner sold directly to homeowners, then look no further than Rockford Chimney

      Customer Testimonials

      Back in July you gave me excellent advice re. sizing/purchasing a flue liner for the chimney associated with my wood stove. I'd like to thank you once agai... More

      —AE Northfield, MN

      A few weeks ago I ordered a chimney liner system for my fireplace insert. Your salesman recommended the liner system plus the insulating blanket. I just wa... More

      —AH Happy customer

      Just got around to installing my new smooth flexible liner and deluxe terra cotta cap (wow). The quality of your product is second to none. Very pleased an... More

      —B.B. from Massachusetts

      Thanks so much for the great tech service from Dennis, very knowledgable, friendly and proffessional.Your website is the best, beats your competition by fa... More

      —Bill in Knoxville

      Sue and Dennis, I received the final part of my order yesterday (the chimney cap that actually fits over the chimney chase). It looks wonderfu... More

      —CC, VA

      Hello, I was shopping for an fireplace insert and called RCS to ask why they were so much cheaper than my local guy, the reply was " we sell thousand of th... More

      —Chris, PA.