All

$1,102.99

5.5 Inch x 40 Feet Chimney Liner Kit with tee connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA. Note:... Read More

$959.99

4 Inch x 40 Feet Chimney Liner Kit with tee connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA. Note:... Read More

$744.99

3 Inch x 35 Feet Chimney Liner Kit with tee connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA. Note:... Read More

$534.99

3 Inch x 20 Feet Chimney Liner Kit with tee connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA. Note:... Read More

$781.99

5.5 Inch x 25 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

$849.99

4 Inch x 35 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

$554.99

4 Inch x 20 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

$459.99

4 Inch x 15 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

$534.99

3 Inch x 20 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

$446.99

3 Inch x 15 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

$959.99

7 Inch x 25 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

$670.99

7 Inch x 15 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

$670.99

7 Inch x 15 Feet Chimney Liner Kit with tee connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA. Note:... Read More

$914.99

6 Inch x 30 Feet Chimney Liner Kit with tee connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA. Note:... Read More

$806.99

6 Inch x 25 Feet Chimney Liner Kit with tee connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA. Note:... Read More

From$198.99

Square to Round Vertical Appliance ConnectorMates a drip less connection between square flex liner to the round opening or vertical pipe on your appliance. We will match square to round connector to the correct size based on the liner size selected in Step 1. Read More

From$85.99

Note: Does not include Tee Body and Clean Out Cap.
Need more snout length? This tee snout features a 22 in. long snout along with the secure inside removable clamp connection.

From$40.00

Pro-Form Direct Vent Pipe available in two different finishes: Galvanized or Powder Coated Black Size: 4" x 6 5/8" For use with gas appliances approved for Pro-Form Direct Vent Pipe System ProForm Catalog 1 available galvanized, 1 available powder coated black. No defects. Read More

$75.00

Pro-Form Vertical Round Co-Axial DV Termination Cap Size: 4" x 6 5/8" Finish: Aluminum For use with Pro-Form Direct Vent Pipe System ProForm Catalog No defects, 1 available. Read More

$350.00

Pro-Form Insert Co-Linear Direct Vent Termination Kit with High Wind Cap & Square Base - Powder Coated Black For use with gas appliances that approve Pro-Form Co-Linear DV. Includes: 3" x 3" Pro Form High Wind Round Cap Square Base Kit 3" x 30' & 3" x 4' Aluminum Flex... Read More

$35.00

This 6" x 24" single wall black stove pipe has a few scratches to the finish and the male end was slightly crimped in more. This would be perfect for a wood stove where the appearance of the pipe is not important such as in a workshop or barn. Constructed... Read More

$100.00

This 7" Rock-Vent Class A standard flashing for a 2/12 shingle roof pitch only. Constructed from 304L stainless steel. The opening at the top of the flashing is 10". Storm collar is not included. Sold as is, non-returnable. One available. Read More

$100.00

This 12" round copper chimney pot topper with round clay lid is made for chimney pots that have an inside diameter of 12". In New condition with a copper screen and a round clay lid. This cap comes with the construction adhesive for mounting the cap to the chimney pot.... Read More

From$64.61

DuraVent B-Vent Increasers are used to increase the DuraVent B-Vent pipe. This is typically done when connecting two vent pipes together such as a hot water heater and a furnace which have different vent sizes. The small end of the increaser will be pointed down and the large side of... Read More

From$53.89

DuraVent B-Vent Wall Thimble is used to pass the DuraVent B-vent pipe through a combustible wall. The Wall Thimble provides the necessary 1" clearance from any combustible materials. The Wall Thimble is able to adjust from 3.5" to 6" to accommodate various wall thicknesses. The integrated trim collar provides a... Read More

From$115.52

DuraVent B-Vent Wall Support is used for vertical and horizontal support of the DuraVent B-vent pipe. The wall supports should be used every 4' of vent pipe. The wall support legs can be rotated 360 degrees for wherever you need to place the support on a wall or a ceiling. Read More

From$32.16

DuraVent B-Vent Draft Hood Connector is used to connect the DuraVent B-Vent to either a single wall connector pipe or directly to the appliance. The connection end is female to slide over the connector pipe of the appliance exhaust collar. Use sheet metal screws to attach the single wall end... Read More

From$111.12

DuraVent B-Vent Tee Connection With Removable Clean Out Cap is used for connecting more than one appliance to the Dura-Vent B-vent pipe. It is very common to connect the exhaust of a furnace or boiler and a hot water heater. The tee connection allows the two pipes together to reach... Read More

From$38.77

DuraVent B-Vent Adjustable Length Pipe is used to get the perfect length of pipe when the vent path calls for a specific length of pipe. B-Vent pipe is unable to be cut to length which makes the adjustable pipe a great solution. The adjustable length pipes work by telescoping up... Read More

$275.00

Stainless Steel Cap 21" x 9 1/2". New Condition. Sold as is. Non-Returnable. One Available.

$40.00

8x24 Single Wall DuraVent Black Pipe. Some scratching that can be repaired with paint. Sold As Is, Non-Returnable. One Available. 

$70.00

6" Single Wall Dura Vent Tee has minor scratching that can be repaired with paint.  This is sold as is and non-returnable. One Available. 

$180.00

The 6" x 11" Square Ceiling Support Box is in new condition but as some scratches and rust that can be cleaned and painted. This is used on a flat ceiling, the bottom of the ceiling support must extend a minimum of 3 inches into the room. Supports up to... Read More

$300.00

The Octagon Copper Chimney Pot Rain Cap has a 9.75" flange (pictured with Protective Film on Copper).  Protects against weather and animal beautifully. Removable octagon lid.

$202.19

Use the 6" to 8" DuraVent DVL Double Wall Stove Pipe Increaser when converting a stove with a 6" exhaust hole to 8" DuraVent DVL Double Wall Black Stove Pipe. The 6" end is a male end and the 8" end is a female end. The Stove Adapter will be... Read More

$85.00

Animal screen 24 inches x 16 inches x 11 inches high. The screen includes a  piano hinge mounting flange 3/4 inch wide. This stainless steel cage would be great to keep critters out of a chimney or flue. Sold As Is. Non-Returnable. One Available. Cage mesh measurements: 24"x16"x11" , -3/4"x1... Read More

$50.00

5" x 8" x 8" Rigid Terra-Cotta Mount Top Plate. New Condition. Used with a 5" rigid pipe. Pipe clamp not included. The Rigid Terra-Cotta Mount Top Plate is used if you have clay tile in your chimney and it's exposed by 1/2” or more at the top of your... Read More

$200.00

8.625" ID Octagon Stainless Steel Chimney Pot Rain Cap with mounting flange. New condition. Effective and attractive way to cap off your chimney pot. Protects chimneys equipped with chimney pots from rain, snow, and animal intrusion. One available, sold as is, non-returnable. Read More

$75.00

The 8" x 13" Oval Terra Cotta Top Plate size for a 5" x 8.15" oval Liner. Features an oval opening for our Oval Flex Liners. The Oval Terra Cotta Top Plate comes with stainless steel screws to secure the top plate via a friction fit. One available, sold as... Read More

$350.00

8x8 Locktop II damper, Missing Hardware This lock top damper is missing the hardware pack, the cable is included. Will work great for parts or someone that can fabricate the hardware. The Lock Top II Chimney Damper With Cap is the perfect solution for cold & drafty wood burning fireplaces.  Read More

$150.00

This 6” x 36” Rock-Vent 316L inner, 430 outer Class A chimney pipe is on clearance due to a few slight dings on the side of the class A pipe. These are small dings and do not affect the overall performance or safety of the system. This would be perfect... Read More

Sold out