All

From$20.73

DuraVent B-Vent Firestop Trim Spacer is used at every level of the home the DuraVent B-vent pipe passes through. The Firestop Spacer also acts as a trim collar for the first level of the home.

From$126.99

Use the 3" 4" or 5" single wall black stove pipe tee connection to a stove with a rear exhaust hole to a vertical stove pipe section. The tee connections come with a clean out cap to make accessing the back of the stove easy without having to remove the... Read More

$39.99

The 3/4 in. x 6 ft. Black Self-adhesive flat wood stove glass gasket is designed for a variety of wood and pellet stoves with glass doors. The self-adhesive glass gasket applies to the perimeter of the wood or pellet stove glass to ensure an airtight seal for proper burn without... Read More

From$12.98

The DuraVent PelletVent Pro Storm Collar is used to wrap around the PelletVent Pro Pipe to seal the gap between where the pipe comes through the roof flashing or chase cover. The storm collar is made specifically for the DuraVent PelletVent Pro Pipe and will fit snugly around the pipe.... Read More

From$38.94

The SuperPro / SuperVent Storm Collar is used to seal the gap between where the chimney pipe comes through the roof flashing when passing through the roof. The Storm Collar wraps around the SuperPro / SuperVent pipe tightly and sits over the cone of the roof flashing. A bead of silicone will need... Read More

From$183.58

SuperPro / SuperVent Decorator Flat Ceiling Support is used to support the weight of the vertical chimney stack when passing through a flat ceiling. Simply frame around the decorator cap between the ceiling joist and use the included trim collar for a finished look. The SuperPro / SuperVent Stove Pipe... Read More

From$124.89

The DuraPlus Base Anchor Plate is used to connect DuraPlus Class A Chimney Pipe to a pre-fabricated zero clearance fireplace. This acts as the starter adapter for making the connection to the top of the fireplace. The Base Anchor Plate can also be used to convert a masonry firebox to... Read More

$204.37

The DuraPlus Attic Insulation Shield is required in an installation where the chimney pipe is passing through an attic space. The Attic Shield attaches to either a Firestop Joist Shield or a Ceiling Support Box. The Attic Shield consists of two parts: the base and the storm collar. The two... Read More

$42.46

Add the DuraTech Spark Arrestor to your DuraTech Chimney Cap to have a smaller 1/2" mesh on the chimney cap. The finer mesh will prevent larger embers from leaving the chimney which helps prevent against wild fires. In some areas and jurisdictions a 1/2" mesh Spark Arrestor is required. The... Read More

From$949.00

Are you tired of dealing with your messy inefficient wood burning or gas fireplace? The Redstone Electric Fireplace insert easily slides into most fireplaces and provides a trim flashing for sealing around the fireplace opening. Available in 26", 30", and 36" sizes. Can also be recessed in a combustible wall.... Read More

$124.99

The 4" Selkirk Roof Support is best used to stabilize the chimney pipe above the ceiling support box as the pipe passes through the roof. It does not provide any vertical support. The adjustable wings are able to adjust to any roof pitch. Read More

$173.99

The 4" Selkirk Wall Support Kit is used to support the tee connection and a vertical chimney pipe of up to 50' of 4" Selkirk class A chimney pipe. The support easily mounts to the wall and the tee sits right on the support while allowing for easy access to... Read More

From$316.99

The Crown Mount High Wind Co-Linear Chimney Caps are the best option for venting a gas or pellet fireplace insert or stove into a masonry chimney in a windy area. If you currently experience high winds blowing your pilot light out the High Wind Co-Linear Chimney Cap is ideal for... Read More

$1,110.00

The Drolet Fox Wood Stove is one of the most compact EPA 2020 rated wood stoves on the market. Measuring just 26.75" tall, 18.5" wide and 22.75" depth, this makes it about 30% smaller than all other EPA rated wood stoves. With an average efficiency rating of 74%, the Fox... Read More

$3,039.00

The Ascent 42B Direct Vent Gas Fireplace is the perfect fireplace for both tradesmen and homeowners alike. The large fireplace is sure to be the focal point of any room. The shallow depth fireplace is perfect when space is at a premium and is perfect for corner installation. The fireplace... Read More

$2,961.00

The Osburn 2000 freestanding stove is one of the most popular units in the Osburn family of wood stoves. Its cast-iron door, which features the distinctive lines you've come to expect from Osburn, gives it a look combining the contemporary and the traditional. With a 2.4 cubic foot firebox, the... Read More

From$179.99

The tee has an square shaped body and is attached to the bottom of a chimney pipe / liner. The horizontal (snout) of the tee is round 10" long female and fits into the thimble of your chimney wall. Note: Slight expansion on the end of the tee snout portion... Read More

From$123.99

The pulling cone makes the job of installing a chimney liner easier. Use it to help pull the liner through the chimney. Quick to connect and disconnect from our Square stainless steel chimney liner. A strong eye hook is ready for your rope! Select size and price below. Note: Pulling... Read More

$233.99

Mates a dripless connection between square flex liner and the round opening or vertical pipe on your appliance. The quick connect clamp on the square end ensures a seal tight connection between the connector and the flex liner. The square to round connector is made from 24 gauge 316L stainless... Read More

From$1,408.00

Virginian Chimney Pot Measurements Height: 24 in. Base ID: 11 1/2 in. Base OD: 14 in. Top Opening: 10 1/2 in. Base Shape: Round Weight: 85 lbs Brand: Superior Clay Features & Glazing Information The Virginian Clay Chimney Pot comes standard in a beautiful & natural clay. Additionally, the Virginian... Read More

$159.99

Use the Thru-the-Wall room to room fan to move cool air in the summer and warm air in the winter. The Thru-the-Wall fan features an easy to install housing that telescopes to install in frame walls from 3 1/2" to 6 1/2" thick. A high quality thermally protected motor with... Read More

$1,607.00

Windsor Magnum Smooth Chimney Pot Measurements Height: 26 in. Base ID: 22 in. Base OD: 25.5 in. Top Opening: 19 in. ID Base Shape: Round Weight: 223 lbs Brand: Sandkuhl Features & Glazing Information The Windsor Magnum Smooth Clay Chimney Pot comes standard in a beautiful & natural clay. (Glazing is Temporarily Discontinued) Additionally,... Read More

From$145.19

The DuraVent Direct Vent Pro Vinyl Siding Standoff is used for horizontal venting applications where temperature sensitive material is near the horizontal vent cap, such as vinyl, shiplap, shake shingle, etc. This will prevent any warping or melting to vinyl siding. Use with the Square Horizontal Vent Vap only. Read More

From$193.22

The DuraVent Direct Vent Pro Attic Insulation Shield is required for any vertical venting when the chimney pipe is passing through an attic space. The Attic Insulation Shield will prevent any insulation or debris from accumulating around the vent pipe. The Attic Insulation Shield will provide 1" clearance to combustible... Read More

From$265.34

Use the DuraTech Elbow Strap when offsetting the pipe with the elbow kit. The Elbow Strap will help support the weight of the pipe on the offset. The Elbow Strap is required when using the Elbow Kit. For longer offsets an additional Elbow Strap may be required. Straps are 30"... Read More

From$87.99

The Rock-Vent Pellet Pipe Attic Insulation Shield is required when the pellet vent pipe is passing through a ceiling into an attic. This will ensure the insulation maintains the appropriate clearance from the pellet vent pipe. The included storm collar is required for use with the Attic Insulation Shield. Measurement... Read More

$933.99

5 Inch x 35 Feet Chimney Liner Kit with tee connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA. Note:... Read More

$673.99

3 Inch x 30 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

$4,123.00

The Osburn 3500 Wood Burning Fireplace Insert is one of the most powerful inserts in its class. The 3.5 cubic ft firebox is capable of handling up to a 22" log with a maximum burn time of up to 10 hours. It produces up to 110,000 BTUs with a heating... Read More

From$7.88

DuraVent B-Vent Storm Collar is used to seal around the DuraVent B-vent pipe as it passes through either a roof flashing or a chimney chase cover. Silicone will need to be applied to make a seal around the storm collar where it meets the pipe above the cover or flashing.... Read More

From$306.60

DuraVent DVL Double Wall Stove Pipe Masonry Adapter is used to connect the DuraVent double wall stove pipe to either a masonry chimney or to a stainless steel chimney liner tee connection installed in a masonry thimble. The double wall end is a male end to ensure the stove pipes... Read More

From$151.14

DuraVent DVL Double Wall Stove Pipe Damper Section allows you to slow down and control the burn of the wood burning stove. A damper section is a must have for an older wood stove which typically do not have any draft controls built in to the stove. The damper will... Read More

From$374.71

Double wall stove pipe is not able to be cut to length. DuraVent DVL Double Wall Stove Pipe Telescoping Sections are the solution for achieving the perfect pipe length. The DVL double wall stove pipe is available in two adjustable lengths. The small telescoping section will adjust from 29" to... Read More

From$126.98

The DuraVent DVL Double Wall Stove Pipe Adjustable Sections are used to slide up or down a standard length of DVL stove pipe to allow for the necessary length of stove pipe. Since double wall stove pipe cannot be cut to length, the adjustable sections are the perfect choice when... Read More

From$116.84

DuraVent DVL Double Wall Stove Pipe is used to reduce the clearance to combustible material from 18" down to as close as 6" from a wall and 8" from a ceiling. Used as a connector pipe to vent a wood stove to either a class a chimney system or to... Read More

$4,168.00

The Drolet Eco-65R pellet stove capable of producing long lasting, stable heat with minimum effort. The giant hopper is capable of holding 125 pounds of wood pellets able to burn for up to 100 hours on one load of pellets. With a .77 g/h emissions rating and a 77% efficiency... Read More

From$151.20

The DuraVent PelletVent Pro Wall Thimble is used to provide the necessary clearance and safe passage for the PelletVent Pro Pipe when passing through a combustible wall for through-the-wall installations. The Wall Thimble is equipped with an insulating ring that will help prevent air infiltration from entering the home around... Read More

$137.27

The DuraVent PelletVent Pro Increaser is used to convert a 3" PelletVent Pro Pipe to 4" PelletVent Pro Pipe. The 3" side is a male pipe end and the 4" side is a female pipe end. This is used when a stove with a 3" diameter exhaust hole requires a... Read More

From$120.97

The DuraVent PelletVent Pro Metal Roof Flashing is used to waterproof around the PelletVent Pro Pipe as it passes through either a metal, slate, or terra-cotta tile roof. The base of the flashing is made from dead soft aluminum that is capable of forming to the irregular shape of metal,... Read More

From$133.80

The SuperPro / SuperVent Roof Support can be used to support the weight of the chimney pipe at a floor or ceiling and is able to adjust to any roof pitch. It is capable of supporting up to 50 vertical chimney pipes and is also a great choice to support the... Read More

From$488.72

The SuperPro / SuperVent Tee and Tee Cap is used for horizontal venting application when the pipe needs to pass through the wall and run up the side of the home. The Tee connection is what turns the pipe from horizontal to vertical. The Tee will need to be mounted... Read More

From$728.80

The DuraPlus Class A Elbow Kit is used to offset the Class A Chimney Pipe when obstacles and obstructions are in the way of the pipe's path. Available in 15 and 30 degrees that include a set of two elbows and the elbow support. The first elbow will angle the... Read More

From$114.21

The DuraTech Wall Strap is used for interior and exterior installations to provide lateral support for the chimney pipe. The Wall Strap is required every 8 ft. above either the tee support for through the wall installation and the ceiling box for a through the ceiling or inside a chase... Read More

$1,199.99

The Caboose Tiny Wood Stove is a space saving Tiny Wood Stove that is capable of heating up to 600 sq.ft which makes it the perfect addition from any Tiny Home, RV, Camper or Small cabin. Weighing in at only 90 pounds and measuring 22" wide by 25" tall and... Read More

$268.99

The 4" Selkirk Class A Insulated 30 Degree Elbow Kit consists of two 30 degree elbows which allows you to offset the pipe to get around an obstruction or a roof overhang. It is very common that the placement of the ceiling support box is not lined up with the... Read More

$2,369.00

The Osburn 1700 wood stove is freestanding and provides several options for the bottom supports to fit any style. Choices include traditional legs, structural legs for a more sleek design, or pedestal model. All options include an ash pan for easy cleanup and maintenance. Designed to heat your smaller spaces... Read More

From$3,039.00

The Arlington cast iron gas stove, with its slender, space saving design and 45º venting, is perfect for smaller room applications. Even though small in size, it holds a large PHAZERAMIC burner system and brightly glowing ember bed, viewed through the European styled ceramic glass viewing area. MIRRO-FLAME Porcelain Reflective... Read More

$839.99

Everything you need in one box: precisely sized foil faced 1/4" insulating blanket, retractable mesh, spray adhesive, foil tape and clamps. UL listed for use with single wall stainless steel chimney liners. Chimney insulation is highly recommended for preventing chimney fires and is free of carcinogens (unlike the competition's ceramic... Read More

$63.99

50 ft. of stainless steel cable length specifically designed for Lyemance Chimney Dampers. This replacement damper cable will attach to your spring-loaded power level Lyemance Damper.

From$1,471.00

Savoy Chimney Pot Measurements Height: 24 in. Base ID: 14 x 14 in. Base OD: 16 1/2 x 16 1/2 in. Top Opening: 12 in. Base Shape: Square Weight: 110 lbs Brand: Superior Clay Features & Glazing Information The Savoy Clay Chimney Pot comes standard in a beautiful & natural... Read More

From$1,837.00

Halifax Chimney Pot Measurements Height: 30 in. Base ID: 20 1/4 in. Base OD: 22 3/4 in. Top Opening: 16 1/4 in. Base Shape: Round Weight: 180 lbs Brand: Superior Clay Features & Glazing Information The Halifax Clay Chimney Pot comes standard in a beautiful & natural clay. Additionally, the Halifax Chimney... Read More

From$1,506.00

Baron Chimney Pot Measurements Height: 32 in. Base ID: 13 1/2 x 13 1/2 in. Base OD: 15 3/4 x 15 3/4 in. Top Opening: 9 1/2 in. Base Shape: Square  Weight: 125 lbs Brand: Superior Clay Features & Glazing Information The Baron Clay Chimney Pot comes standard in a beautiful & natural clay.... Read More

$1,607.00

Windsor Magnum Chimney Pot Measurements Height: 26 in. Base ID: 22 in. Base OD: 25.5 in. Top Opening: 19 in. ID Base Shape: Round Weight: 223 lbs Brand: Sandkuhl Features & Glazing Information The Windsor Magnum Clay Chimney Pot comes standard in a beautiful & natural clay. (Glazing is Temporarily Discontinued) Additionally, the Windsor... Read More

$1,089.00

Style C 16 x 16 Chimney Pot Measurements Height: 30 in. Base ID: 13.5 in. x 13.5 in. Base OD: 15.5 in. x 15.5 in. Top Opening: 12 in. x 12 in. ID Base Shape: Square Weight: 95 lbs Brand: Sandkuhl Features & Glazing Information The Style C 16 x 16 Clay Chimney Pot... Read More

From$109.91

The DuraVent Direct Vent Pro Wall Thimble is used for horizontal venting to provide a safe passageway through the side of the home. The Wall Thimble is able to adjust to varying wall thicknesses. The thimble is for horizontal venting only. The thimble will only work with the Square High... Read More

$1,277.00

New Castle Chimney Pot Measurements Height: 24 in. Base ID: 14.5 in. x 14.5 in. Base OD: 17 in. x 17 in. Top Opening: 11 in. OD Base Shape: Square Weight: 139 lbs Brand: Sandkuhl Features & Glazing Information The New Castle Clay Chimney Pot comes standard in a beautiful & natural clay. (Glazing... Read More

$1,346.00

Baron Chimney Pot Measurements Height: 31 in. Base ID: 13 in. x 13 in. Base OD: 16 in. x 16 in. Top Opening: 9.5 in. ID Base Shape: Square Weight: 110 lbs Brand: Sandkuhl Features & Glazing Information The Baron Clay Chimney Pot comes standard in a beautiful & natural clay. (Glazing is Temporarily... Read More

$1,139.99

8 Inch x 30 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

$623.99

4 Inch x 25 Feet Chimney Liner Kit with tee connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA. Note:... Read More

$754.99

5 Inch x 25 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

$603.99

3 Inch x 25 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More