All

From$132.06

The DuraVent DVL Double Wall Stove Pipe Adjustable Sections are used to slide up or down a standard length of DVL stove pipe to allow for the necessary length of stove pipe. Since double wall stove pipe cannot be cut to length, the adjustable sections are the perfect choice when... Read More

$45.00

The Rigid Terra-Cotta Mount Top Plate 6" x 8" 13" is used if you have clay tile in your chimney and it's exposed by 1/2” or more at the top of your chimney. The top plate will pressure bolt to the outside of the protruding clay flue tile. Made with... Read More

$142.76

The DuraVent PelletVent Pro Increaser is used to convert a 3" PelletVent Pro Pipe to 4" PelletVent Pro Pipe. The 3" side is a male pipe end and the 4" side is a female pipe end. This is used when a stove with a 3" diameter exhaust hole requires a... Read More

From$120.47

DuraVent PelletVent Pro Flat Ceiling Support Box with Firestop Spacer is used to support the PelletVent pipe when passing through a flat ceiling. The Ceiling Support comes with an integrated trim for a finished look as well as a support clamp that wraps around the pipe and bears the weight... Read More

From$103.58

The DuraVent PelletVent Pro Round Horizontal Rain Cap is the termination cap for direct vent horizontal applications. The Horizontal Rain Cap can be turned to direct the exhaust to the ideal position. The Horizontal Cap is equipped with a mesh screen to prevent any animals or critters from entering the... Read More

From$134.00

The DuraPlus Standard Roof Flashing is used to weatherproof the pipe when it is passing through a shingled roof. The Standard Flashing is available for either a 0/12 through 6/12 roof pitch or for 7/12 through 12/12 roofs. The top side of the flashing will tuck under the shingles while... Read More

From$174.00

The DuraPlus Class A Chimney Rain Cap is designed to prevent rain and snow from entering the inside of the chimney pipe. The chimney cap is constructed out of stainless steel and is equipped with a spark arrestor screen to prevent sparks from leaving the chimney cap. The twist lock... Read More

$274.99

The Papyrus Fireplace Tool Set includes everything you need to operate and maintain a fire in a wood burning fireplace or a wood burning stove. The contemporary design is sure to catch the eye of anyone that is near it. The unique basket rack will ensure no soot or ash... Read More

$4,619.00

The Matrix 2700 wood insert defines the combination of traditional design and increased efficiency. This fireplace insert model will fit your traditional, sleek design style while providing the performance of a modern insert. Heat your living space up to 2,200 square feet with the maximum output of 80,000 BTU/h and... Read More

From$63.99

The Ridge Hook provides a safer and easier way to access the roof for chimney repairs. Easily attach the ridge hook to virtually any D rung, wood, aluminum or fiberglass ladders. Optional wheels are available which makes getting the ridge hook on the roof easily. Are you looking for an... Read More

From$536.99

Copper Clamp On Chimney Rain Caps do it all; while they are an attractive way to cap off your metal or clay liner, they are also very effective. Protect chimneys from rain, snow, and animal intrusion. These caps clamp on to the outside of the opening of the clay tile... Read More

From$174.85

The DuraVent Direct Vent Pro Dead Soft Aluminum Roof Flashing is used to properly seal the vent pipe roof penetration through metal or tile roofs. The Dead Soft Flashing is able to conform to irregular shapes on the metal or tile roof. The Dead Soft Flashing is available in 0/12... Read More

$623.99

4 Inch x 25 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

$881.99

8 Inch x 20 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

From$21.55

DuraVent B-Vent Firestop Trim Spacer is used at every level of the home the DuraVent B-vent pipe passes through. The Firestop Spacer also acts as a trim collar for the first level of the home.

$999.00

Welcome the chill of winter with the warmth and elegance of the Englander Blue Ridge 100 wood stove. This beautifully designed stove combines rustic charm with modern technology to provide an exceptionally efficient heating solution for your home. Styled to blend seamlessly with any decor, the stove features a durable... Read More

From$157.25

The DuraVent PelletVent Pro Wall Thimble is used to provide the necessary clearance and safe passage for the PelletVent Pro Pipe when passing through a combustible wall for through-the-wall installations. The Wall Thimble is equipped with an insulating ring that will help prevent air infiltration from entering the home around... Read More

From$125.81

The DuraVent PelletVent Pro Metal Roof Flashing is used to waterproof around the PelletVent Pro Pipe as it passes through either a metal, slate, or terra-cotta tile roof. The base of the flashing is made from dead soft aluminum that is capable of forming to the irregular shape of metal,... Read More

From$133.80

The SuperPro / SuperVent Roof Support can be used to support the weight of the chimney pipe at a floor or ceiling and is able to adjust to any roof pitch. It is capable of supporting up to 50 vertical chimney pipes and is also a great choice to support the... Read More

From$48.64

The SuperPro / SuperVent Rafter Radiation Shield must be installed where the chimney is enclosed immediately below the roof line. An example of this is when the attic space of a house is being used as living space (ie. bedroom, guestroom etc.). It must also be installed when height restrictions... Read More

From$183.58

SuperPro / SuperVent Decorator Flat Ceiling Support is used to support the weight of the vertical chimney stack when passing through a flat ceiling. Simply frame around the decorator cap between the ceiling joist and use the included trim collar for a finished look. The SuperPro / SuperVent Stove Pipe... Read More

From$214.00

The DuraPlus Dead Soft Aluminum Flashing is used to waterproof the pipe when it is passing through a metal roof or tile roof. The Soft Flashing is malleable to conform to the shape of corrugated metal and tile roofs. The Soft Flashing is available for 0/12 through 6/12 roof pitches.... Read More

From$107.00

The DuraTech Wall Strap is used for interior and exterior installations to provide lateral support for the chimney pipe. The Wall Strap is required every 8 ft. above either the tee support for through the wall installation and the ceiling box for a through the ceiling or inside a chase... Read More

$784.99

The 4" Selkirk Class A Tee connection is used to turn the pipe in a vertical orientation when running a Class A chimney pipe through a combustible wall. The Tee connection comes with a removable clean out cap which allows for easy access for your regular maintenance. The horizontal snout... Read More

From$316.99

The Crown Mount High Wind Co-Linear Chimney Caps are the best option for venting a gas or pellet fireplace insert or stove into a masonry chimney in a windy area. If you currently experience high winds blowing your pilot light out the High Wind Co-Linear Chimney Cap is ideal for... Read More

$999.00

The Drolet Fox Wood Stove is one of the most compact EPA 2020 rated wood stoves on the market. Measuring just 26.75" tall, 18.5" wide and 22.75" depth, this makes it about 30% smaller than all other EPA rated wood stoves. With an average efficiency rating of 74%, the Fox... Read More

$82.99

These products do not have any faults - new in box items. Note: Double wall stove pipe is only compatible with the same manufacturer's brand pipe, therefore this can only be used with Selkirk Black Double Wall Pipe. The main listings of Double Wall pipe on our website are not... Read More

$499.99

The roof staging starter system designed and built to provide you with a lifetime of use. Follow the setup guide, and this system will take only a few minutes to attach to your 2x8s and go to work for you. Set of two. Read More

From$466.37

The DuraVent Direct Vent Pro Square Horizontal Termination Cap is used for horizontal venting termination cap. The cap allows for the air intake and the exhaust without the exhaust gas mixing with the fresh air intake. Used for standard and high-wind installations. Check with the appliance manufacturer's installation instructions for... Read More

From$36.24

The DuraVent Direct Vent Pro Elbow Straps will support the weight of the pipe between offsets. The Elbow Strap bands around the vent piping and the straps are attached to nearby framing members. The straps are 17" in length and galvanized finish. Read More

$167.99

The Selkirk Interior Re-Support assembly allows for two different methods of chimney re-support. The first method is used at the immediate section of chimney above the upper elbow of an offset. With the appropriate Fire Stop Joist Shield in place, clamp the support band around chimney and attach with 6... Read More

$1,122.99

6 Inch x 40 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

$617.97

We offer a package that includes the common items needed to complete a flat or pitched ceiling installation for ease of ordering. Start building your Ceiling Support Kit by choosing your 24" Square Ceiling Support with Trim & Male Adapter (to connect to black single wall stove pipe), Attic Insulation Shield... Read More

From$32.53

DuraVent B-Vent Adjustable Flashing is used to waterproof seal around the pipe to waterproof the roof penetration. The flashing is available in 0/12 thru 6/12 pitch for low slope roofs and also 7/12 thru 12/12 for steeper roofs. The flashing is used for shingle roofs only. The flashing will tuck... Read More

From$318.66

DuraVent DVL Double Wall Stove Pipe Masonry Adapter is used to connect the DuraVent double wall stove pipe to either a masonry chimney or to a stainless steel chimney liner tee connection installed in a masonry thimble. The double wall end is a male end to ensure the stove pipes... Read More

$39.99

The 3/4 in. x 6 ft. Black Self-adhesive flat wood stove glass gasket is designed for a variety of wood and pellet stoves with glass doors. The self-adhesive glass gasket applies to the perimeter of the wood or pellet stove glass to ensure an airtight seal for proper burn without... Read More

$4,129.00

The Drolet Eco-65R pellet stove capable of producing long lasting, stable heat with minimum effort. The giant hopper is capable of holding 125 pounds of wood pellets able to burn for up to 100 hours on one load of pellets. With a .77 g/h emissions rating and a 77% efficiency... Read More

From$38.94

The SuperPro / SuperVent Storm Collar is used to seal the gap between where the chimney pipe comes through the roof flashing when passing through the roof. The Storm Collar wraps around the SuperPro / SuperVent pipe tightly and sits over the cone of the roof flashing. A bead of silicone will need... Read More

$194.40

The SuperPro / SuperVent Roof Brace Kit is used to provide extra stability of the chimney pipe above the roof line. The Roof Brace Kit is required when there is 5 feet or more of chimney pipe extending above the roof. It should also be installed for every 5 feet... Read More

From$46.22

The SuperPro / SuperVent Finishing Plate is used to provide a finished look when the Class A chimney pipe is passing through a soffit or flat ceiling when a ceiling support box is not being used. It provides the mandatory 2 in. clearance from combustible material. Constructed from galvanized steel.... Read More

$170.00

The DuraPlus Attic Insulation Shield is required in an installation where the chimney pipe is passing through an attic space. The Attic Shield attaches to either a Firestop Joist Shield or a Ceiling Support Box. The Attic Shield consists of two parts: the base and the storm collar. The two... Read More

From$173.00

The DuraTech Firestop Joist Shield is used when the DuraTech Class A pipe is passing through a floor or ceiling where a ceiling support box is not used. The plate gets mounted to the underside of the ceiling and the sleeve is adjustable to cover the framing. Note: The Firestop... Read More

$173.99

The 4" Selkirk Roof Support is best used to stabilize the chimney pipe above the ceiling support box as the pipe passes through the roof. It does not provide any vertical support. The adjustable wings are able to adjust to any roof pitch. Read More

$237.99

The 4" Selkirk Wall Support Kit is used to support the tee connection and a vertical chimney pipe of up to 50' of 4" Selkirk class A chimney pipe. The support easily mounts to the wall and the tee sits right on the support while allowing for easy access to... Read More

$54.99

Allows for quick and easy access to the rooftop. It fits single or extension, wood, fiberglass and aluminum ladders with round or "D" rung styles. The ridge hook makes for a safer rooftop for your chimney liner or cover installation. Many homeowners have mentioned that the ridge hooks would make... Read More

From$99.99

The Rectangle Flat Bottom Plate is 18 in. x18 in.  with a square collar to accept the square flexible chimney liner at the bottom. Can be trimmed down if needed with a pair of good tin snips. Note: Rectangle chimney liner components are custom made to your specifications and are... Read More

$1,704.00

Style E Bantam Jumbo Chimney Pot Measurements Height: 33 in. Base ID: 14.5 in. x 14.5 in. Base OD: 17 in. x 17 in.  Top Opening: 11 in. Base Shape: Square Weight: 147 Brand: Sandkuhl Features & Glazing Information The Style E Bantam Jumbo Clay Chimney Pot comes standard in... Read More

From$151.00

The DuraVent Direct Vent Pro Vinyl Siding Standoff is used for horizontal venting applications where temperature sensitive material is near the horizontal vent cap, such as vinyl, shiplap, shake shingle, etc. This will prevent any warping or melting to vinyl siding. Use with the Square Horizontal Vent Vap only. Read More

From$248.00

Use the DuraTech Elbow Strap when offsetting the pipe with the elbow kit. The Elbow Strap will help support the weight of the pipe on the offset. The Elbow Strap is required when using the Elbow Kit. For longer offsets an additional Elbow Strap may be required. Straps are 30"... Read More

From$1,445.00

The DuraTech 30 degree elbow is used to offset the chimney pipe around obstructions such as rafters, roof joists, or ridge poles. One elbow included. Most installations will require a quantity of two elbows. Offsets and angles greater than 30 degrees are not approved and void the UL103 listing. Fabricated... Read More

$1,023.99

8 Inch x 25 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

$724.99

6 Inch x 20 Feet Chimney Liner Kit with tee connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA. Note:... Read More

From$84.28

DuraVent B-Vent Adjustable Elbows are used to offset the vent pipe to avoid any obstructions while maintaining the proper 1" clearance to combustibles. Available in either 45/60 degree and 90 degree angles. The 45/60 degree is able to adjust to any angle between straight up and down to a 45... Read More

From$136.29

DuraVent DVL Double Wall Stove Pipe Adapter With Trim is used to connect DuraVent DVL double wall black stove pipe to either DuraTech or DuraPlus class A chimney pipe. The snap adapter will connect to the ceiling support box or a wall thimble. The double wall end of the adapter... Read More

From$126.99

Use the 3" 4" or 5" single wall black stove pipe tee connection to a stove with a rear exhaust hole to a vertical stove pipe section. The tee connections come with a clean out cap to make accessing the back of the stove easy without having to remove the... Read More

From$249.81

The DuraVent PelletVent Pro Pitched / Cathedral Ceiling Support Box is used to support the weight of the PelletVent Pro Pipe when passing through a cathedral ceiling. The Pitched Ceiling Support Box is equipped with a support clamp which will wrap around the pipe and sit inside the support box... Read More

From$126.75

The DuraVent PelletVent Pro Attic Insulation Shield is used in an attic space to prevent anything from coming in contact with the PelletVent Pro Pipe. The Attic Insulation Shield will provide the necessary 1" clearance from combustible materials. The adjustable sleeve is able to adjust from 11" to 20" to... Read More

From$191.96

The SuperPro / SuperVent Tee Support is used to support the weight of the SuperPro / SuperVent Tee and the vertical chimney stack. The Tee Support can support up to 38 feet of vertical chimney pipe. When mounted to the side of a structure it will provide the necessary 2 in. clearance from... Read More

From$488.72

The SuperPro / SuperVent Tee and Tee Cap is used for horizontal venting application when the pipe needs to pass through the wall and run up the side of the home. The Tee connection is what turns the pipe from horizontal to vertical. The Tee will need to be mounted... Read More

From$104.00

The DuraPlus Base Anchor Plate is used to connect DuraPlus Class A Chimney Pipe to a pre-fabricated zero clearance fireplace. This acts as the starter adapter for making the connection to the top of the fireplace. The Base Anchor Plate can also be used to convert a masonry firebox to... Read More

From$247.00

The DuraTech Extended Wall Support Bracket is used to support the pipe off the side of the home when bypassing obstructions or roof overhangs. Typically used for through the wall venting. The Extended Wall Support Bracket can be used in place of the Tee Support and is capable of supporting... Read More

From$999.00

Are you tired of dealing with your messy inefficient wood burning or gas fireplace? The Redstone Electric Fireplace insert easily slides into most fireplaces and provides a trim flashing for sealing around the fireplace opening. Available in 26", 30", and 36" sizes. Can also be recessed in a combustible wall.... Read More

$3,039.00

The Ascent 42B Direct Vent Gas Fireplace is the perfect fireplace for both tradesmen and homeowners alike. The large fireplace is sure to be the focal point of any room. The shallow depth fireplace is perfect when space is at a premium and is perfect for corner installation. The fireplace... Read More

$2,859.00

The Osburn 2000 freestanding stove is one of the most popular units in the Osburn family of wood stoves. Its cast-iron door, which features the distinctive lines you've come to expect from Osburn, gives it a look combining the contemporary and the traditional. With a 2.4 cubic foot firebox, the... Read More

From$179.99

The tee has an square shaped body and is attached to the bottom of a chimney pipe / liner. The horizontal (snout) of the tee is round 10" long female and fits into the thimble of your chimney wall. Note: Slight expansion on the end of the tee snout portion... Read More

From$123.99

The pulling cone makes the job of installing a chimney liner easier. Use it to help pull the liner through the chimney. Quick to connect and disconnect from our Square stainless steel chimney liner. A strong eye hook is ready for your rope! Select size and price below. Note: Pulling... Read More

$233.99

Mates a dripless connection between square flex liner and the round opening or vertical pipe on your appliance. The quick connect clamp on the square end ensures a seal tight connection between the connector and the flex liner. The square to round connector is made from 24 gauge 316L stainless... Read More

From$1,408.00

Virginian Chimney Pot Measurements Height: 24 in. Base ID: 11 1/2 in. Base OD: 14 in. Top Opening: 10 1/2 in. Base Shape: Round Weight: 85 lbs Brand: Superior Clay Features & Glazing Information The Virginian Clay Chimney Pot comes standard in a beautiful & natural clay. Additionally, the Virginian... Read More

$1,688.00

Windsor Magnum Smooth Chimney Pot Measurements Height: 26 in. Base ID: 22 in. Base OD: 25.5 in. Top Opening: 19 in. ID Base Shape: Round Weight: 223 lbs Brand: Sandkuhl Features & Glazing Information The Windsor Magnum Smooth Clay Chimney Pot comes standard in a beautiful & natural clay. Additionally, the Windsor Magnum Smooth... Read More

From$114.31

The DuraVent Direct Vent Pro Wall Thimble is used for horizontal venting to provide a safe passageway through the side of the home. The Wall Thimble is able to adjust to varying wall thicknesses. The thimble is for horizontal venting only. The thimble will only work with the Square High... Read More

From$200.95

The DuraVent Direct Vent Pro Attic Insulation Shield is required for any vertical venting when the chimney pipe is passing through an attic space. The Attic Insulation Shield will prevent any insulation or debris from accumulating around the vent pipe. The Attic Insulation Shield will provide 1" clearance to combustible... Read More

From$127.99

The Rock-Vent Pellet Pipe Siding Trim Kit is used in conjunction with the Wall Pass-Thru and should be used when the exterior of the structure has vinyl or aluminum siding. The Siding Trim Kit will provide a leak-free wall pass through for both aluminum and vinyl siding. Constructed of galvalume... Read More

From$87.99

The Rock-Vent Pellet Pipe Attic Insulation Shield is required when the pellet vent pipe is passing through a ceiling into an attic. This will ensure the insulation maintains the appropriate clearance from the pellet vent pipe. The included storm collar is required for use with the Attic Insulation Shield. Measurement... Read More

$1,413.00

Baron Chimney Pot Measurements Height: 31 in. Base ID: 13 in. x 13 in. Base OD: 16 in. x 16 in. Top Opening: 9.5 in. ID Base Shape: Square Weight: 110 lbs Brand: Sandkuhl Features & Glazing Information The Baron Clay Chimney Pot comes standard in a beautiful & natural clay. Additionally, the Baron... Read More

$933.99

5 Inch x 35 Feet Chimney Liner Kit with tee connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA. Note:... Read More

$673.99

3 Inch x 30 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More