All

$3,574.00

If you are looking for a sleek, modern design that is un-intrusive to your living space, the Osburn Inspire 2000 is the wood fireplace insert for you. This unit is highly efficient and does not lack in aesthetics. The Osburn Inspire 2000 insert offers modernism, comfort, and functionality. Order yours... Read More

$49.99

This Open End Canvas Sage and Ivory Log Carrier can be used to store or transport wood and kindling for your fireplace. The large 35" x 21" dimension will allow you to haul more firewood, making the chore easier with less trips to your firewood pile. Made with heavy duty... Read More

From$27.54

The DuraVent Direct Vent Pro Ceiling Firestop is required when the vent pipe is passing through a second floor while venting vertically. The Firestop acts as a shield in the event of a fire to prevent the flames from easily moving through the hole where the pipe is passing through... Read More

$98.99

The Rock-Vent Pellet Pipe to Flexible Chimney Liner Adapter is used when you need to transition from our 4" pellet pipe to our 4" flexible chimney liner. This is most commonly used when you need to transition from a flexible liner to a pellet vent pipe to pass through a... Read More

$1,329.00

The Breckwell SW500 Wood Burning Stove is the perfect wood stove for heating smaller spaces or homes that utilize zone heating. This space saving stove is capable of heating up to 750 square feet and is able to handle up to an 11" log size with a max burn time... Read More

From$191.96

The SuperPro / SuperVent Pitched/Cathedral Ceiling Support Box is used to support the chimney pipe as it passes through a cathedral ceiling. The Pitched/Cathedral Ceiling Support Box comes with a 17 in. long support box which is framed in between the rafters, a support band, and a 4 in. trim... Read More

$292.99

The 4" Selkirk Black Flat Ceiling Support Box is installed between the ceiling joist for a flat ceiling and is used to support the vertical chimney pipe above the ceiling. The Ceiling Support is able to support up to 50' of vertical chimney pipe. The Flat Ceiling Support Box is... Read More

From$2,651.00

The Ventis Forever Zero Clearance Wood Burning Fireplace is the perfect choice for new construction or replacement of your old manufactured fireplace. The Forever Fireplace will certainly last for many generations with the all stainless steel construction and quality craftsmanship. The specialty designed smoke chamber is higher than other manufacturers... Read More

$1,699.00

The Drolet Deco Alto offers the modern design features of the Deco Nano and Deco II wood stoves but has a much larger firebox and ability to heat much larger spaces. With a 2.4 cubic ft firebox the Deco Alto is able to accept up to a 20" log while... Read More

From$94.99

Rectangle liner to liner connector with female to male dripless seam. Connect flex to flex, rigid to flex, and more. You will need a stainless steel rectangle to rectangle liner connector if you are purchasing more than 25 feet of liner, as it will be shipped in separate lengths (25... Read More

From$129.99

Duct Booster in-duct fans boost airflow to hard-to-heat rooms! They are also great utility fans for home air supply, ventilation and exhaust projects. Boosts air flow in hard to heat or cool rooms. May be used as exhaust or air intake fans. Easy installation in both metal and flex duct.... Read More

$1,241.85

The DuraVent Direct Vent Pro Masonry Conversion Kit allows you to utilize an existing masonry chimney to vent a gas or propane direct vent stove. The conversion allows you to utilize the chimney to provide the combustion air. A 4" flexible chimney liner must be installed for the exhaust vent.... Read More

$751.99

8 Inch x 15 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

From$61.31

The DuraVent PelletVent Pro Wall Strap/Tee Support is used to support the weight of the PelletVent Pro Pipe for through-the-wall venting when a tee is used to run the pipe up the side of the home & above the roof. The Wall Strap/Tee Support provides the necessary 1" clearance from... Read More

From$65.99

Use the Premium Smooth Wall Chimney Liner Coupler when you need to couple two sections of the liner together. The female end will go over the top section of flex liner and the male end will go into the bottom section of flex liner. Use short screws or rivets to... Read More

From$46.22

The SuperPro / SuperVent Spark Arrestor Mesh is used to prevent large sparks from exiting the chimney pipe as a further safety precaution to prevent fires. The 1/2 in. stainless steel mesh is easily installed around the SuperPro / SuperVent Rain Cap. Note: The Spark Arrestor Mesh is required for... Read More

$4,799.00

The Drolet Chic-Choc wood burning cook stove is a great addition to any kitchen and perfect for enhancing the cooking experience. The large stainless steel oven is designed for cooking large meals capable of feeding a large family. The oven is equipped with two stainless steel cooking grids with three... Read More

From$159.99

The 4" Selkirk Adjustable Flashing is the best way to waterproof where the pipe comes through a shingle roof. The flashing tucks under the shingles on the top side of the roof and overhangs the shingles on the lower side of the roof. The flashing is available in two adjustable... Read More

From$240.99

Crown Mount Co-Linear Chimney Caps are the premier option for venting a gas or pellet fireplace insert or stove in a masonry chimney. This unique chimney cap can accommodate the exhaust as well as the fresh air intake (liners sold separately). Simply utilize the chimney for all your fresh air... Read More

$1,618.00

The Century Heating FW2900 Wood Burning Stove is an affordable larger medium size stove with high heat production. The FW2900 is EPA approved, with an easy to use non-catalytic secondary burn. The classic wood stove design is sure to be the focal point of any room. The FW2900 can heat... Read More

From$87.99

Female to male dripless seam. Connect flex to flex, rigid to flex, and more. You will need a stainless steel oval to oval liner connector if you are purchasing more than 25 feet of liner, as it will be shipped in separate lengths. (25 feet is the maximum length that... Read More

From$31.99

Use the Rock-Vent Pellet Pipe Storm Collar to seal the gap between the pellet pipe and the flashing. Made to fit the exact outer dimension of our pellet pipe. Constructed of 304L stainless steel.The Rock-Vent Pellet Pipe Storm Collar is made to fit the exact outer dimension of our pellet... Read More

From$183.00

Use the DuraTech Wall Strap to support and stabilize the chimney pipe to the side of the home or inside a chase. The Wall Strap will ensure the 2" clearance that is necessary for the UL listing. A Wall Strap is required every 4' of vertical chimney pipe. The Wall... Read More

From$57.99

The Rock-Vent Pellet Pipe Roof Support is designed to provide support for the chimney pipe at the roof line. Easily adjusts to any roof pitch. Constructed with a stainless steel band and galvanized mounting brackets. Use the Roof Support to extend Rock-Vent Pellet Pipe below a cathedral ceiling, when exceeding... Read More

From$121.51

DuraVent DVL Double Wall Stove Pipe is used to reduce the clearance to combustible material from 18" down to as close as 6" from a wall and 8" from a ceiling. Used as a connector pipe to vent a wood stove to either a class a chimney system or to... Read More

From$89.99

The Small Diameter Single Wall Black Stove Pipe Increaser/Reducers are a great way to increase or reduce the size of the pipe for when the size of the stove outlet does not match the size of the chimney pipe. They are available to transition from 3" to 4" or from... Read More

$68.49

The DuraVent PelletVent Pro Harmon Adapter is used to connect PelletVent Pro Pipe to any Harmon pellet stove. Harmon pellet stoves have a unique size exhaust collar and require this special appliance adapter to make a proper connection to the stove. Only available in 3" diameter and comes in a... Read More

$142.99

The 4" Vacu-Stack chimney cap is the premier chimney cap for preventing wind related downdraft problems. Strong winds can make operating a tiny wood stove difficult. A strong wind is capable of pushing the smoke down the chimney pipe and into the home. The Vacu-Stack Chimney Caps unique design creates... Read More

Configure for Price

The Rectangle Terra Cotta Top plate features a rectangle opening for our Rectangle Flex Liners. The Rectangle Terra Cotta Top Plate comes with stainless steel screws to secure the top plate via a friction fit. See our Terra Cotta Top Plate Sizing Chart. Please select the top plate size and... Read More

From$489.99

Application: Double wall or triple wall air-cooled chimneys. (Collar Included) The Copper Vacu-Stack is the premier chimney cap (collar included) for solving common, wind-related chimney draft problems. Wind-induced downdraft can cause smoke to enter the living space when: Hills, mountains, tall trees, and or tall buildings are in the vicinity.... Read More

From$583.45

The DuraVent Direct Vent Pro Vertical Installation Kit provides all the base parts necessary to properly vent the DuraVent direct vent pro pipe through a flat or vaulted ceiling and through the roof. The vertical installation kit is available in both the 4" inner 6 5/8" outer and the 5"... Read More

$1,310.00

Halifax Clay Chimney Pot Measurements Height: 23 in. Base ID: 13.5 in. x 13.5 in. Base OD: 16 in. x 16 in. Top Opening: 10 in. ID Base Shape: Square Weight: 102 lbs Brand: Sandkuhl Features & Glazing Information The Halifax Clay Chimney Pot comes standard in a beautiful & natural clay. Additionally, the... Read More

$118.99

Use the Support Box Truss Spanner to eliminate the need to frame the Support Box on all sides. Adjusts from 16" - 24" on center and fits pipe diameters of 5", 6", 7", and 8". Measurement Chart: Rock-Vent Truss Spanner A 17.267” B 25.167” C 2” *Due to many variables... Read More

From$50.99

If you are installing Rock-Vent Class A Chimney Pipe under a stone slate or a custom shroud, then you will need this pipe end cap. You will also may need the End Cap if you are installing an after-market rain cap, such as the Vacu-Stack or WeatherShield chimney caps. The... Read More

$1,014.99

6 Inch x 35 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

$914.99

6 Inch x 30 Feet Chimney Liner Kit with appliance insert connector, no sag top plate, and chimney cap. Applications: Wood, Pellet, Gas, Oil, and Coal Burning Appliances Need a different size or type of chimney liner? Click here for more options! 100% stainless steel and made in the USA.... Read More

From$98.99

Female to male dripless seam. Connect flex to flex, rigid to flex, and more. You will need a stainless steel oval to oval liner connector if you are purchasing more than 25 feet of liner.

From$13.50

The DuraVent PelletVent Pro Storm Collar is used to wrap around the PelletVent Pro Pipe to seal the gap between where the pipe comes through the roof flashing or chase cover. The storm collar is made specifically for the DuraVent PelletVent Pro Pipe and will fit snugly around the pipe.... Read More

From$121.08

The DuraVent PelletVent Pro Square Horizontal Rain Cap is the termination cap for through the wall horizontal venting. The Square Horizontal Rain Cap has a swivel collar that allows you to position the vent cap away from any obstruction outside. This is the perfect cap for direct-venting horizontally though-the-wall where... Read More

From$267.99

The DuraVent PelletVent Pro Standard Tee with Clean-Out Cap is used to connect PelletVent Pro pipe to a stove with a rear exhaust (in conjunction with the Stove Adapter). It can also be used to turn the pipe vertically once the pipe has passed through a wall thimble for exterior... Read More

From$99.93

The DuraVent PelletVent Pro Quick Release Appliance Adapter is used to easily make the connection from PelletVent Pro Pipe to an exhaust outlet of a pellet stove without having to use screws to make the connection. The Quick Release Adapter features an adjustable hose clamp and a gasket which form... Read More

From$197.99

The Premium Smooth Wall two-part tee connection with 10" removable snout and tee cap is used for horizontal connections. The tee connector is an easy solution for connecting a stove pipe to a chimney liner. Tighten one screw from the inside of the horizontal tee snout and you are connected.... Read More

From$63.00

The DuraPlus Wall Straps are used to stabilize the DuraPlus Chimney Pipe on long pipe runs on the exterior side of a building. A Wall Strap must be installed every 4 feet of vertical pipe above the tee support, ceiling support box, or a zero clearance fireplace. The Wall Strap... Read More

$143.99

The 4" Selkirk Wall Radiation Shield is used as a wall thimble to shield the wall studs for the class A chimney pipe for a through the wall venting application. The 4" Wall Radiation Shield can accommodate a wall thickness of 7.5" to 1" thick. You must use the 4"... Read More

$43.99

These products do not have any faults - new in box items. Note: Double wall stove pipe is only compatible with the same manufacturer's brand pipe, therefore this can only be used with Selkirk Black Double Wall Pipe. The main listings of Double Wall pipe on our website are not... Read More

From$115.99

Quick connect square rain cap with screen, wind guard, and quick connect clamp system. The rain cap fits on the outside of the top plate collar. Once in place all you need to do is tighten down the clamp that is already on the rain cap.See our Top Plate &... Read More

$1,223.00

Windsor Medium Chimney Pot Measurements Height: 21 in. Base ID: 16 in. Base OD: 19 in. Top Opening: 13 in. ID Base Shape: Round Weight: 115 lbs Brand: Sandkuhl Features & Glazing Information The Windsor Medium Smooth Clay Chimney Pot comes standard in a beautiful & natural clay. Additionally, the Windsor Medium Smooth Chimney... Read More

$1,261.00

Style E Bantam Chimney Pot Measurements Height: 27 in. Base ID: 11 in. x 11 in. Base OD: 13 in. x 13 in. Top Opening: 8 in. Base Shape: Square Weight: 70 lbs Brand: Sandkuhl Features & Glazing Information The Style E Bantam Clay Chimney Pot comes standard in a... Read More

From$49.71

The DuraVent Direct Vent Pro Wall Strap is used to support and stabilize the vent pipe for vertical venting applications. A Wall Strap should be used in 4-foot intervals for vertical vent pipe. The Wall Strap will provide the 1" clearance to combustible material that is required. Read More

From$50.93

DuraVent B-Vent Universal Adapters are used to connect DuraVent Type B-vent pipe to either another manufacturer's type B-Vent or a flexible chimney liner. Use the male adapter when converting another manufacturer's B-vent to the DuraVent B-Vent when the DuraVent will be on the top side of the vent pipe. Use... Read More

From$61.91

DuraVent B-Vent Gas Chimney Pipe is used to vent natural gas and propane appliances such as natural gas fireplaces, gas-fired furnaces, boilers, water heaters, and wall or space heating applications. UL is listed to meet UL 441 and CAN/ULC-S605 standards for 1" clearance to combustible material. Constructed with an aluminum... Read More

From$67.92

The DuraVent PelletVent Pro Appliance Adapter is used to connect the PelletVent Pro Pipe to the exhaust collar of the pellet stove. The PelletVent Pro Pipe will not fit directly to the exhaust outlet due the double wall construction. The appliance adapter has a crimped end to insert inside the... Read More

From$17.58

The SuperPro / SuperVent Locking Bands are used to add stability for the chimney pipe connections. The Locking Bands are required for any elbow offset connection, the horizontal pipe connection to the tee snout and for any pipe joint that is extended below the Cathedral Ceiling Support Box. Locking Bands... Read More

From$162.74

The SuperPro / SuperVent Adjustable Flashing with Storm Collar is used to waterproof the chimney pipe when it is passing through a roof. The Adjustable Flashing is used for shingle roofs and is available in either 0/12 through 6/12 or 7/12 through 12/12 roof pitches. The Flashing will tuck underneath the shingles... Read More

$40.00

Add the DuraTech Spark Arrestor to your DuraTech Chimney Cap to have a smaller 1/2" mesh on the chimney cap. The finer mesh will prevent larger embers from leaving the chimney which helps prevent against wild fires. In some areas and jurisdictions a 1/2" mesh Spark Arrestor is required. The... Read More

From$167.00

The DuraTech Roof Support is used when the pipe is passing through a ceiling and a roof to support the weight of the pipe. Typically used for cathedral ceiling installation it allows the pipe to extend below the ceiling while sitting on the roof joist. The Roof Support has adjustable... Read More

From$257.00

The DuraTech Class A Wall Thimble is used to allow safe passage of the DuraTech Class A chimney pipe when passing through a combustible wall. The Wall Thimble can adjust from 4" to 10" to accommodate varying wall thickness. The interior firestop is painted black with a galvanized exterior firestop.... Read More

From$136.91

The DuraTech Single Wall Snap Lock Adapter with Trim is used to make the connection from a DuraTech Ceiling Support Box to single wall black stove pipe. The Snap Lock Adapter simply snaps to the bottom of the ceiling support box and provides a positive drip free connection from the... Read More

$129.99

Basket Design Cast Iron Universal Fireplace Grate. Elevates the wood off of the floor of the fireplace allowing more air to fully circulate through the wood. The Universal Cast Iron Grate is an excellent choice for a replacement fireplace grate or an excellent addition for those who have not used... Read More

$84.99

These products do not have any faults - new in box items. Note: Double wall stove pipe is only compatible with the same manufacturer's brand pipe, therefore this can only be used with Selkirk Black Double Wall Pipe. The main listings of Double Wall pipe on our website are not... Read More

From$99.99

18 in.x18 in. flat bottom plate with an oval collar to accept the oval chimney liner at the bottom. Can be trimmed down with with a pair of good tin snips. Note: Oval chimney liner components are custom made to your specifications and are not refundable. Please contact us if... Read More

$159.99

Use the Thru-the-Wall room to room fan to move cool air in the summer and warm air in the winter. The Thru-the-Wall fan features an easy to install housing that telescopes to install in frame walls from 3 1/2" to 6 1/2" thick. A high quality thermally protected motor with... Read More

From$85.99

The Rock-Vent Pellet Pipe Firestop is used when the pellet pipe passes through a floor or ceiling. The Firestop Joist Shield is required for each level of the home where the pellet pipe is passing through a floor or ceiling. This is not required when passing through a roof. The... Read More

From$19.99

DuraVent B-Vent Storm Collar is used to seal around the DuraVent B-vent pipe as it passes through either a roof flashing or a chimney chase cover. Silicone will need to be applied to make a seal around the storm collar where it meets the pipe above the cover or flashing.... Read More

$1,749.00

Step into a world of warmth and beauty with the Englander Blue Ridge 500 wood stove, where cutting-edge technology meets traditional design to elevate your home's comfort and style. This high-performance stove is engineered to deliver exceptional warmth, ensuring your space remains cozy even during the harshest winters. The Englander... Read More

From$661.48

The SuperPro / SuperVent Elbow Kit is used to offset the Class A pipe when obstructions such as a roof and ceiling joist are in the direct path of the vent. For vertical venting through the ceiling and the roof, it is common for the penetration of the ceiling to... Read More

From$218.00

The DuraPlus Pitched/Cathedral Ceiling Support Box is used to support the DuraPlus Chimney Pipe when passing through a combustible cathedral ceiling. The support box is 24 in. long and capable of supporting up to 35 ft. of chimney pipe. The inside of the support box is equipped with a twist... Read More

$84.99

The 4" Selkirk Wall Band is used for a through the wall venting to stabilize the pipe above the tee against the side of the home. You must install a Wall Band every 6' above the tee on the side of the home. When the Wall Band is installed on... Read More

Configure for Price

Replacement Ceramic Glass For Wood Stoves is available in any size up to 42" x 36". Ceramic glass is rated for high temperatures and is the perfect choice for wood or coal burning stove. The Replacement Ceramic Glass For Wood Stoves is the perfect solution for replacing the glass on... Read More

$3,234.00

The Enerzone Solution 2.3-I wood burning fireplace insert offers a sleek design with powerful heating capacity. This EPA certified non-catalytic secondary combustion wood insert produces up to 75,000 BTUs and is able to heat up to 2,100 square feet. The large 2.4 cubic ft firebox is capable of holding up... Read More

$240.00

The Laser Auto-Center System is ideal for installing a new chimney venting system such as a Class A chimney pipe, Pellet Vent pipe or Direct Vent gas pipe. The Laser Auto-Center System utilizes a low power class III A laser beam to indicate the center mark for the vent pipe... Read More

$2,111.00

The Century Heating FW3500 Wood Burning Stove is an affordable extra large wood stove with a generous amount of heat production. The FW3500 is EPA approved with an easy to use non-catalytic secondary burn. The extra large glass provides a perfect view to enjoy the beauty of the flames. The... Read More

$1,124.00

The Century Heating S250 is a small wood burning stove perfect for tight spaces. Standing at just 30 1/4" tall, 18 1.2" wide and 22 7/8" depth, it is the perfect choice for smaller homes or workshops. The focus of the simple design is efficiently heating a space of up... Read More

$229.99

The durable and easy to use vacuum designed to suck up completely cooled wood or pellet ashes. Great to use in place of your household vacuum. Power:1000W. Conforms to UL STD. 1017. Certified to CSA STD. C22.2 No. 243-10. The perfect vacuum to clean your appliance of completely cooled ashes.... Read More

$2,789.00

With its compact design, the Osburn 1700 wood fireplace insert can be installed in a fireplace with the minimum dimensions of 21 1/2" h x 27 1/2" w x 12 7/8" d. With the minimum depth of 12 7/8", this model is extremely versatile and fits in most fireplace openings.... Read More

$823.00

Dry Top 12 x 12  Chimney Pot Measurements Height: 30 in.  Base ID: 10.75 in. x 10.75 in. Base OD: 11.75 in. x 11.75 in. Top Opening: 4 @ 6.5 in. x 6.5 in. ID Base Shape: Square Weight: 63 lbs Brand: Sandkuhl Features & Glazing Information Note: Dry Pots cannot be glazed, they are manufactured using... Read More

$212.99

The Co-Axial To Co-Linear Appliance Adapter is used to transition a direct vent gas fireplace with a 4" inner and 6 5/8" outer exhaust hole to a co-linear 3" exhaust and 3" air intake venting system. This is great for when you want to install a direct vent gas fireplace... Read More

From$145.62

DuraVent Direct Vent Pro Ceiling Support / Wall Thimble Cover Plate is used as a decorative cover plate for a horizontal venting application to cover the wall thimble. It can also be used for flat ceilings as a trim collar. The cover comes with an insulated ring to reduce any... Read More

From$226.50

The DuraVent Direct Vent Pro Cathedral / Flat Ceiling Support will support the weight of the pipe for vertical venting applications. The support box comes with a support clamp, support box, and trim for around the box. The support box measures 10.625" x 10.625" and is 14" in length. Painted... Read More

$117.99

The Harman Pellet Stove Increaser will make it easy to connect your 3" Harman stove to 4" Rock-Vent Pellet Pipe. This 3" to 4" Increaser will slide over the Harman stove exhaust hole and transition to 4" pellet pipe in the situation that 4" pellet pipe is needed. Fabricated with... Read More

From$169.36

DuraVent DVL Double Wall Stove Pipe Fixed Elbows are available in 45 and 90 degree angles. The elbows are used to offset the stove pipe when the stove and the chimney are not in line. The 45 degree elbows are best to use as an offset to minimize the restriction... Read More

From$157.19

DuraVent DVL Double Wall Stove Pipe Damper Section allows you to slow down and control the burn of the wood burning stove. A damper section is a must have for an older wood stove which typically do not have any draft controls built in to the stove. The damper will... Read More

From$389.69

Double wall stove pipe is not able to be cut to length. DuraVent DVL Double Wall Stove Pipe Telescoping Sections are the solution for achieving the perfect pipe length. The DVL double wall stove pipe is available in two adjustable lengths. The small telescoping section will adjust from 29" to... Read More